Os motores de busca de Datasheet de Componentes eletrônicos
  Portuguese  ▼
ALLDATASHEETPT.COM

X  



1612WTTDR10 Revenda

RevendaNome de PeçasFabricante ElectrônicoDescrição ElectrónicosPriceQty.
BuyNow

Flip Electronics
NCP1612ADR2G

onsemi Stock, Ship Today
RoHS : Compliant
1 : $0.46
15,000
CY7C1612KV18-250BZXC

Infineon Technologies AG Stock, Ship Today
RoHS : Compliant
1 : $218.9
886

Pasternack Enterprises US
PE3W16123

Pasternack Enterprises Key Specifications, Connector 1 Series: SSMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SSMB Plug to BNC Female Cable Using RG188 Coax., Radio frequency assembly SSMB plug to BNC female cable using RG188 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMB plug to BNC female cable using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMB to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SSMB cable connection on one end and a BNC cable connection on the other. Our SSMB to BNC cable assembly has a plug gender on end 1 and a female on end 2. PE3W16123 can also be known as a SSMB male to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W16123 RF cable has a PTFE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our SSMB plug to BNC female cable has a maximum VSWR of 1.4:1. SSMB male to BNC jack cable assembly PE3W16123 is built with RG188 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with SSMB to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16123 can also be used in the other direction and will be a BNC female to SSMB plug cable assembly if the opposite connectivity is required. SSMB male to BNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMB to BNC cable assembly for quick shipment worldwide. Variations of SSMB and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMB to BNC RF cable assembly as per your requirements.
2,726
PE38116-12

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to QMA Male Cable 12 Inch Length Using PE-C195 Coax., Radio frequency assembly SMA male to QMA male cable 12 inch length using PE-C195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to QMA male cable 12 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and QMA cable connection on the other. Our low loss SMA to QMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to QMA cable is a male to male coax assembly, PE38116-12, can also be known as a low loss SMA plug to QMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to QMA plug cable assembly PE38116-12 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38116-12 can also be used in the other direction and will be QMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to QMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to QMA male cable 12 inch length using PE-C195 coax.
1 : $73.89
25 : $70.2
50 : $66.5
100 : $63.55
704
PE3W16123-36

Pasternack Enterprises Key Specifications, Connector 1 Series: SSMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SSMB Plug to BNC Female Cable 36 Inch Length Using RG188 Coax., Radio frequency assembly SSMB plug to BNC female cable 36 inch length using RG188 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMB plug to BNC female cable 36 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMB to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SSMB cable connection on one end and a BNC cable connection on the other. Our SSMB to BNC cable assembly has a plug gender on end 1 and a female on end 2. PE3W16123-36 can also be known as a SSMB male to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W16123-36 RF cable has a PTFE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our SSMB plug to BNC female cable has a maximum VSWR of 1.4:1. SSMB male to BNC jack cable assembly PE3W16123-36 is built with RG188 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with SSMB to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16123-36 can also be used in the other direction and will be a BNC female to SSMB plug cable assembly if the opposite connectivity is required. SSMB male to BNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMB to BNC cable assembly for quick shipment worldwide. Variations of SSMB and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMB to BNC RF cable assembly as per your requirements.
1 : $103.99
10 : $101.91
25 : $99.83
100 : $97.75
555
PE3W16123-72

Pasternack Enterprises Key Specifications, Connector 1 Series: SSMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SSMB Plug to BNC Female Cable 72 Inch Length Using RG188 Coax., Radio frequency assembly SSMB plug to BNC female cable 72 inch length using RG188 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMB plug to BNC female cable 72 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMB to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SSMB cable connection on one end and a BNC cable connection on the other. Our SSMB to BNC cable assembly has a plug gender on end 1 and a female on end 2. PE3W16123-72 can also be known as a SSMB male to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W16123-72 RF cable has a PTFE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our SSMB plug to BNC female cable has a maximum VSWR of 1.4:1. SSMB male to BNC jack cable assembly PE3W16123-72 is built with RG188 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with SSMB to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16123-72 can also be used in the other direction and will be a BNC female to SSMB plug cable assembly if the opposite connectivity is required. SSMB male to BNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMB to BNC cable assembly for quick shipment worldwide. Variations of SSMB and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMB to BNC RF cable assembly as per your requirements.
1 : $117.99
10 : $115.63
25 : $113.27
100 : $110.91
506
PE3W17216-12

Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Female to SMA Male Cable 12 Inch Length Using RG400 Coax., Radio frequency assembly TNC female to SMA male cable 12 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female to SMA male cable 12 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a SMA cable connection on the other. Our TNC to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W17216-12 can also be known as a TNC jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17216-12 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our TNC female to SMA male cable has a maximum VSWR of 1.4:1. TNC jack to SMA plug cable assembly PE3W17216-12 is built with RG400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17216-12 can also be used in the other direction and will be a SMA male to TNC female cable assembly if the opposite connectivity is required. TNC jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA RF cable assembly as per your requirements.
1 : $94.19
25 : $89.48
50 : $84.77
100 : $81.0
27
PE3W21612LF

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. SMA Male to Reverse Polarity SMA Male Right Angle Cable Using RG196 Coax, LF Solder. PE3W21612LF is a SMA male to reverse polarity SMA male right angle cable using RG196 coax. This Pasternack SMA male to reverse polarity SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to reverse polarity male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21612LF SMA male to SMA reverse polarity male right angle cable assembly is constructed with RG196 coax.
0
PE3W16120/HS

Pasternack Enterprises Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to N Male Right Angle Cable Using LMR-100A-UF Coax with HeatShrink. PE3W16120/HS is a MMCX plug right angle to N male right angle cable using LMR-100A-UF coax. This Pasternack MMCX plug right angle to N male right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm N for connector 2. MMCX right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16120/HS MMCX plug right angle to N male right angle cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W16161-200CM

Pasternack Enterprises Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. UHF Male to N Male Cable 200 CM Length Using RG58 Coax., Radio frequency assembly UHF male to N male cable 200 cm length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The UHF male to N male cable 200 cm length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a UHF cable connection on one end and a type N cable connection on the other. Our UHF to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W16161-200CM can also be known as a UHF plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.96-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16161-200CM RF cable has a PVC (NC) jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. Our UHF male to type N male cable has a maximum VSWR of 1.4:1. UHF plug to type N plug cable assembly PE3W16161-200CM is built with RG58 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to type N cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16161-200CM can also be used in the other direction and will be a type N male to UHF male cable assembly if the opposite connectivity is required. UHF plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to type N cable assembly for quick shipment worldwide. Variations of UHF and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to type N RF cable assembly as per your requirements.
1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31
0
PE3W16128

Pasternack Enterprises Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. 2.4mm Male to SMP Female Right Angle Cable Using PE-047SR Coax. PE3W16128 is a 2.4mm male to SMP female right angle cable using PE-047SR coax. This Pasternack 2.4mm male to SMP female right angle cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm SMP for connector 2. 2.4mm to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.4mm to female SMP right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W16128 2.4mm male to SMP female right angle cable assembly is constructed with PE-047SR coax.
0
PE3W16161-24

Pasternack Enterprises Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. UHF Male to N Male Cable 24 Inch Length Using RG58 Coax., Radio frequency assembly UHF male to N male cable 24 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The UHF male to N male cable 24 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a UHF cable connection on one end and a type N cable connection on the other. Our UHF to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W16161-24 can also be known as a UHF plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.96-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16161-24 RF cable has a PVC (NC) jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. Our UHF male to type N male cable has a maximum VSWR of 1.4:1. UHF plug to type N plug cable assembly PE3W16161-24 is built with RG58 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to type N cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16161-24 can also be used in the other direction and will be a type N male to UHF male cable assembly if the opposite connectivity is required. UHF plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to type N cable assembly for quick shipment worldwide. Variations of UHF and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to type N RF cable assembly as per your requirements.
1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86
0
PE3W11612

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58-TPX, RF Cable Type: RG58-TPX, RF Cable Impedance: 50 Ohm. N Male to TNC Male Cable Using RG58 Coax. PE3W11612 is a N male to TNC male cable using RG58-TPX coax. This Pasternack N male to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11612 N male to TNC male cable assembly is constructed with RG58-TPX coax.
0
PE3C11116-12

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to TNC Male Low Loss Cable 12 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-12 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-12 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-12 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-12 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-12 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements.
1 : $390.63
10 : $375.0
25 : $359.38
100 : $343.75
0
PE3W16129

Pasternack Enterprises Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm. 2.92mm Female 4 Hole Flange to 1.85mm Female Cable Using PE-SR047FL Coax. PE3W16129 is a 2.92mm female 4 hole flange to 1.85mm female cable using PE-SR047FL coax. This Pasternack 2.92mm female 4 hole flange to 1.85mm female cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 1.85mm for connector 2. Our female 2.92mm 4 hole flange to female 1.85mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W16129 2.92mm female 4 hole flange to 1.85mm female cable assembly is constructed with PE-SR047FL coax.
0
PE3C100016-12

Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to TNC Male Low Loss Space Cable 12 Inch Length Using PE-R200LL Coax., Radio frequency assembly TNC male to TNC male low loss space cable 12 inch length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male low loss space cable 12 inch length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss space TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C100016-12 can also be known as a low loss space TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.562-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. TNC low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100016-12 RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3C100016-12 is built with PE-R200LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. Low loss space TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss space RF cable assembly as per your requirements.
1 : $370.99
10 : $356.15
25 : $341.31
100 : $326.47
0
PE3W16124

Pasternack Enterprises Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. NEX10 Female to 7/16 DIN Male Cable Using SPF-250 Coax. PE3W16124 is a NEX10 female to 7/16 DIN male cable using SPF-250 coax. This Pasternack NEX10 female to 7/16 DIN male cable assembly uses a 50 Ohm NEX10 for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our female NEX10 to male 7/16 DIN cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W16124 NEX10 female to 7/16 DIN male cable assembly is constructed with SPF-250 coax.
0

Venkel Ltd.
FMPI201612-1R0MT

VENKEL LTD Flat Molded Power Inductor;201612;1�H;�20%
RoHS : Compliant
0

Vyrian
V62/11612-01XB

Analog Devices Inc Single-Ended Multiplexer
RoHS : Not Compliant
11,966
TMS4161-20NL

Texas Instruments Video DRAM, 64KX1, 200ns, NMOS, PDIP20
RoHS : Not Compliant
9,843
V62/21612-01XE

Texas Instruments Operational Amplifier, 1 Func, 15uV Offset-Max, PDSO8
RoHS : Compliant
8,391
TMS4161-20FML

Texas Instruments Video DRAM, 64KX1, 200ns, NMOS, PQCC18
RoHS : Not Compliant
7,844
TMS4416-12NL

Texas Instruments Page Mode DRAM, 16KX4, 120ns, NMOS, PDIP18
RoHS : Not Compliant
7,677
V62/21612-05XE

Texas Instruments Operational Amplifier, 1 Func, 15uV Offset-Max, PDSO8
RoHS : Compliant
7,643
V62/11612-01XE

Analog Devices Inc Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16
7,584
TMS4416-12FPL

Texas Instruments Page Mode DRAM, 16KX4, 120ns, NMOS, PQCC18
RoHS : Not Compliant
6,888
TMS4161-20NE

Texas Instruments Video DRAM, 64KX1, 200ns, NMOS, PDIP20
6,311
V62/21612-02XE

Texas Instruments Operational Amplifier, 1 Func, 15uV Offset-Max, PDSO8
RoHS : Compliant
4,493
TMS4016-12NL

Texas Instruments Standard SRAM, 2KX8, 120ns, MOS, PDIP24
RoHS : Not Compliant
4,090
V62/21612-03XE

Texas Instruments Operational Amplifier, 1 Func, 15uV Offset-Max, PDSO8
RoHS : Compliant
3,855
TMS4161-20FME

Texas Instruments Video DRAM, 64KX1, 200ns, NMOS, PQCC22
3,822
V62/21612-04XE

Texas Instruments Operational Amplifier, 1 Func, 15uV Offset-Max, PDSO8
RoHS : Compliant
3,792
TR1/6125TD5A

Eaton Corporation Electric Fuse, Time Delay Blow, 5A, 125VAC, 60VDC, 50A (IR), Surface Mount
802

Win Source Electronics
DFE201612P-1R0M=P2

Murata Manufacturing Co Ltd FIXED IND 1UH 3.3A 54 MOHM SMD / Inductor Power Shielded Wirewound 1uH 20% 1MHz Metal 2.7A 0.054Ohm DCR 0806 T/R
RoHS : Compliant
5,600 : $0.0536
4,185 : $0.0598
3,235 : $0.0619
2,350 : $0.0639
1,520 : $0.066
625 : $0.0804
120,000
CT1612DB38400C0FLHA1

Kyocera AVX Components CRYSTAL 38.4000MHZ 7PF SMD / 38.4 MHz ±10ppm Crystal 7pF 80 Ohms 4-SMD, No Lead
550 : $0.7106
410 : $0.7926
320 : $0.8198
230 : $0.8472
150 : $0.8746
65 : $1.0658
70,371
OPA1612AIDRGR

Texas Instruments IC OPAMP AUDIO 80MHZ 8WSON
RoHS : Compliant
390 : $0.8636
315 : $0.8987
240 : $0.9339
170 : $1.0041
110 : $1.0391
55 : $1.1094
47,350
LDC1612DNTR

Texas Instruments IC MULTI 28BIT TO DGTL 12WSON
RoHS : Compliant
152 : $1.9848
113 : $2.2138
88 : $2.2901
64 : $2.3665
41 : $2.4428
17 : $2.9771
25,708
MSP430F1612IPM

Texas Instruments IC MCU 16BIT 55KB FLASH 64LQFP
RoHS : Compliant
37 : $9.2737
30 : $9.6506
23 : $10.0276
16 : $10.7816
11 : $11.1586
5 : $11.9124
20,189
LDC1612DNTT

Texas Instruments IC IND TO DGTL 28BIT 1K 12WSON
RoHS : Compliant
152 : $1.9848
113 : $2.2138
88 : $2.2901
64 : $2.3665
41 : $2.4428
17 : $2.9771
19,040
0430451612

Molex CONN HEADER VERT 16POS 3MM / Connector Header Through Hole 16 position 0.118" (3.00mm)
RoHS : Compliant
440 : $0.7664
330 : $0.8548
255 : $0.8842
185 : $0.9137
120 : $0.9433
50 : $1.1496
16,390
HA16120FP-EL-E

Renesas Electronics Corporation
RoHS : Compliant
57 : $5.9954
42 : $6.6871
33 : $6.9177
24 : $7.1483
16 : $7.3789
7 : $8.9929
10,218
IS43TR16128D-125KBLI-TR

Integrated Silicon Solution Inc IC DRAM 2GBIT PARALLEL 96TWBGA
13 : $24.0304
10 : $26.8031
8 : $27.7273
6 : $28.6516
4 : $29.5758
2 : $36.0455
7,160
61400416121

Wurth Elektronik CONN RCPT USB2.0 TYPEB 4POS R/A
RoHS : Compliant
157 : $2.1412
118 : $2.3883
91 : $2.4706
66 : $2.5529
43 : $2.6354
18 : $3.2118
6,800
ADG1612BRUZ-REEL

Analog Devices Inc IC SWITCH QUAD SPST 16TSSOP / 4 Circuit IC Switch 1:1 1.1Ohm 16-TSSOP
RoHS : Compliant
36 : $8.5042
27 : $9.4854
21 : $9.8125
15 : $10.1396
10 : $10.4666
4 : $12.7562
3,670
IS43TR16128BL-125KBLI

Integrated Silicon Solution Inc IC DRAM 2G PARALLEL 96TWBGA
RoHS : Compliant
16 : $19.8474
12 : $22.1375
9 : $22.9008
7 : $23.6642
5 : $24.4275
2 : $29.771
3,500
IS46TR16128DL-125KBLA2

Integrated Silicon Solution Inc IC DRAM 2GBIT PARALLEL 96TWBGA / SDRAM - DDR3L Memory IC 2Gbit Parallel 800 MHz 20 ns 96-TWBGA (9x13)
RoHS : Compliant
2 : $157.5758
1 : $175.7576
2,000
IS46TR16128DL-125KBLA2-TR

Integrated Silicon Solution Inc IC DRAM 2GBIT PARALLEL 96TWBGA / SDRAM - DDR3L Memory IC 2Gb (128M x 16) Parallel 800 MHz 20 ns 96-TWBGA (9x13)
RoHS : Compliant
2 : $157.5758
1 : $175.7576
1,999
C3M0016120D

Wolfspeed SICFET N-CH 1200V 115A TO247-3 / N-Channel 1200 V 115A (Tc) 556W (Tc) Through Hole TO-247-3
RoHS : Compliant
28 : $11.0307
21 : $12.3034
16 : $12.7277
12 : $13.1519
8 : $13.5762
4 : $16.546
1,680

Ligação URL



ALLDATASHEET é útil para você?  [ DONATE ]  

Sobre Alldatasheet   |   Publicidade   |   Contato conosco   |   Privacy Policy   |   Link para a ficha técnica    |   roca de Link   |   Lista de Fabricantes
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com