| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty.
BuyNow |
Bisco Industries | 2TLC-02C-0215W
| KATO Fastening Systems Inc | **IMAGES ARE FOR REFERENCE ONLY AND MAY NOT REPRESENT ACTUAL PRODUCT** Meets NAS1130-02L25D - 2-56 Unified Coarse Locking Tangless Wire Thread Insert, 0.215in Length, 304 Stainless Steel, Dry Film Lubricant Finish, Bulk Packaging. | | 785
 |
1.051X1.351X0.015WSW SS PL
| WASHERS | | | 561
|
C1.5WH6
| Panduit Corp |
RoHS : Compliant | | 144
|
MAR-6115W
| MISC. INDUSTRIAL HRD | | | 51
|
M85049/38S15W
| Amphenol PCD | | | 30
|
SRL1-5-WH6A
| Essentra Components | | | 27
|
4002-15W
| Camloc Motion Control Ltd | | | 11
|
89013-15W06-06
| MISCELLANEOUS | | | 9
|
M85049/1915W03
| NEW SURPLUS CELL 2 | | | 9
|
M85049/38S15W
| Military Specifications | | | 6
|
M85049/88-15W03
| Amphenol PCD | | | 4
|
M85049/78-15W04
| Glenair Inc |
RoHS : Not Compliant | | 2
|
M85049/14S15W
| SOURIAU-SUNBANK | | | 1
|
M85049/1915W04
| Amphenol PCD | | | 1
|
M85049/8-15W
| Glenair Inc |
RoHS : Not Compliant | | 1
|
Rochester Electronics | 2SK715W-AC
| onsemi | JFET Single 15V 300mW SC-72 T/R
RoHS : Compliant | 100,000 : $0.1802
10,000 : $0.215
1,000 : $0.2412
500 : $0.2615
100 : $0.2906
|
| 50,694
|
LB8115W-NA-MPB-E
| onsemi | SYSTEM MOTOR DRIVER
RoHS : Compliant | 10,000 : $3.14
1,000 : $3.34
500 : $3.54
100 : $3.73
25 : $3.93
|
| 1,241
|
ADM6315W31D2ARTZR7
| Analog Devices Inc | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +3.08V, PDSO4
RoHS : Compliant | 100,000 : $0.9486
10,000 : $1.13
1,000 : $1.27
500 : $1.38
100 : $1.53
|
| 40,459
|
PTD08A015WAD
 | Texas Instruments | DC/DC CONVERTER 1 OUT 700mV to 3.6V 15A 54W 12-DIP Tray
RoHS : Compliant | 10,000 : $14.88
1,000 : $15.81
500 : $16.74
100 : $17.67
25 : $18.6
|
| 4
|
X9315WMI-2.7
 | Intersil Corporation | Pot Digital 1 Element 32 POS 10 kOhm 2.7V ±20% 8-SOP
RoHS : Not Compliant | 10,000 : $3.34
1,000 : $3.54
500 : $3.75
100 : $3.96
25 : $4.17
|
| 219
|
X9315WMZ-2.7
 | Intersil Corporation | Pot Digital 1 Element 32 POS 10 kOhm 2.7V ±20% 8-SOP Tube
RoHS : Compliant | 10,000 : $3.1
1,000 : $3.29
500 : $3.48
100 : $3.68
25 : $3.87
|
| 1,418
|
X9315WP
 | Intersil Corporation | Pot Digital 1 Element 32 POS 10 kOhm 4.5V ±20% 8-DIP Tube
RoHS : Not Compliant | 10,000 : $2.48
1,000 : $2.64
500 : $2.79
100 : $2.95
25 : $3.1
|
| 28
|
MIC37150-1.5WR
| Micrel Inc | IC VOLT REG Fixed 1 REG 1.5V 1.5A S-PAK-3 Tube
RoHS : Compliant | 100,000 : $0.992
10,000 : $1.18
1,000 : $1.33
500 : $1.44
100 : $1.6
|
| 8,655
|
MIC37151-1.5WR
| Micrel Inc | IC VOLT REG Fixed 1 REG 1.5V 1.5A S-PAK-5 Tube
RoHS : Compliant | 10,000 : $1.76
1,000 : $1.87
500 : $1.98
100 : $2.09
25 : $2.2
|
| 10,231
|
MIC49150-1.5WR
| Micrel Inc | IC VOLT REG Fixed 1 REG 1.5V 1.5A S-PAK-5 Tube
RoHS : Compliant | 10,000 : $2.99
1,000 : $3.18
500 : $3.37
100 : $3.55
25 : $3.74
|
| 48,408
|
100315W-QMLV
| National Semiconductor Corporation | Low Skew Clock Driver, 100K Series, 4 True Output(s), 0 Inverted Output(s), ECL, CDFP16
RoHS : Not Compliant | 1,000 : $306.49
500 : $316.93
100 : $327.38
25 : $337.83
1 : $348.28
|
| 86
|
ISL23415WFUZ-TK
| Renesas Electronics Corporation | Single, Low Voltage Digitally Controlled Potentiometer (XDCP)
RoHS : Compliant | 100,000 : $0.6826
10,000 : $0.8147
1,000 : $0.9138
500 : $0.9909
100 : $1.1
|
| 24,000
|
X9315WSZ-2.7
| Renesas Electronics Corporation | Pot Digital 1 Element 32 POS 10 kOhm 2.7V ±20% 8-SOIC Tube
RoHS : Compliant | 10,000 : $1.89
1,000 : $2.01
500 : $2.12
100 : $2.24
25 : $2.36
|
| 100
|
ESDA6V1-5W6
 | STMicroelectronics | TVS Diode Zener Uni-Directional 3V (Max) SOT-363 T/R
RoHS : Compliant | 100,000 : $0.2064
10,000 : $0.2463
1,000 : $0.2763
500 : $0.2996
100 : $0.3329
|
| 13,000
|
X9315WS
| Xicor Inc | Pot Digital 1 Element 32 POS 10 kOhm 4.5V ±20% 8-SOIC Tube
RoHS : Not Compliant | 10,000 : $2.07
1,000 : $2.2
500 : $2.33
100 : $2.46
25 : $2.59
|
| 62
|
TME | 0297015.WXNV
| Littelfuse Inc | Fuse: fuse; 10.9mm; automotive; 15A; 32VDC; Mini; MINI
RoHS : Compliant | 3,000 : $0.164
1,000 : $0.172
500 : $0.18
250 : $0.195
100 : $0.215
50 : $0.231
10 : $0.274
5 : $0.294
1 : $0.36
|
| 5,639
|
CLW-1515-W2E-ER
| Cellevia Batteries | Power supply: switching; mains power supply,mains,plug-in; 1A | 25 : $6.32
5 : $6.77
1 : $7.22
|
| 530
|
CRL15W-20R
| SR Components Inc | Resistor: wire-wound; 20Ω; cement; THT; 15W; ±5%; Ø0.8x35mm | 100 : $0.217
25 : $0.282
10 : $0.392
5 : $0.465
|
| 334
|
CLW-1515-W2E-ER25
| Cellevia Batteries | Power supply: switching; mains power supply,mains,plug-in; 1A | 25 : $6.68
5 : $7.15
1 : $7.63
|
| 178
|
CRL15W-16R
| SR Components Inc | Resistor: wire-wound; 16Ω; cement; THT; 15W; ±5%; Ø0.8x35mm | 100 : $0.217
25 : $0.282
10 : $0.392
5 : $0.465
|
| 178
|
2J0C15W-868-C885G_CU010375
| 2J USA | Antenna: communication; ISM,LoRa,RF,SIGFOX,ZigBee; 2.5dBi | 500 : $1.71
200 : $1.74
100 : $1.79
50 : $1.86
25 : $1.97
10 : $2.14
5 : $2.35
1 : $3.03
|
| 163
|
CRL15W-R3
| SR Components Inc | Resistor: wire-wound; 300mΩ; cement; THT; 15W; ±5%; Ø0.8x35mm | 100 : $0.176
25 : $0.223
10 : $0.295
5 : $0.376
1 : $0.62
|
| 85
|
3H15W4PAR69E20X
| Amphenol CONEC | Connector: D-Sub HD; data transfer | | 0
 |
3H15W4SAT78G60X
| Amphenol CONEC | Connector: D-Sub HD; data transfer | | 0
|
1512115W3D
| CML Innovative Technologies | LED lamp; S5,7s,T1-3/4; white; 6VDC; plastic; 3mm; -20÷60°C
RoHS : Compliant | 100 : $2.6
50 : $2.8
25 : $2.99
1 : $3.2
|
| 0
|
39X2015 WH005
| Alpha Wire | Wire; silicone; HookUp Wire; stranded; Cu; 1x18AWG; white; 15kV | 10 : $255.48
5 : $291.98
3 : $328.48
1 : $364.98
|
| 0
|
3H15W4PAR76F40X
| Amphenol CONEC | Connector: D-Sub HD; data transfer | | 0
|
3H15W4SAR69A50X
| Amphenol CONEC | Connector: D-Sub HD; data transfer | | 0
|
AP7354D-15W5-7
| Diodes Incorporated | IC: voltage regulator; LDO,linear,fixed; 1.5V; 0.15A; SOT25; SMD
RoHS : Compliant | | 0
|
CC15W100-700-DALI-NFC-NX
| NEXVIO by KGP Electronics | Power supply: switching; LED; DALI 2,NFC; 15W; 2.5÷46VDC; IP20 | 20 : $13.51
10 : $14.44
5 : $15.38
1 : $16.3
|
| 0
|
Ameya Holding Limited | NCP15WF104F03RC
| Murata Manufacturing Co Ltd |
RoHS : Compliant | | 10,000
|
NCP15WD683E03RC
| Murata Manufacturing Co Ltd |
RoHS : Compliant | | 10,000
|
NCP15WL104J03RC
| Murata Manufacturing Co Ltd |
RoHS : Compliant | | 10,000
|
NCP15WM474E03RC
| Murata Manufacturing Co Ltd |
RoHS : Compliant | | 10,000
|
NCP15WB473F03RC
| Murata Manufacturing Co Ltd |
RoHS : Compliant | | 10,000
|
NCU15WF104F6SRC
| Murata Manufacturing Co Ltd |
RoHS : Compliant | | 10,000
|
NCP15WL683E03RC
| Murata Manufacturing Co Ltd |
RoHS : Compliant | | 10,000
|
ESDA6V1-5W6
| STMicroelectronics | ESDA Series 5 Channel 6.1 V 50 pF SMT Uni-Directional Transil Array - SOT-323-6L
RoHS : Compliant | | 6,080
|
RB715WTL
 | ROHM Semiconductor | 40V, 0.03A, Schottky Barrier Diodes
RoHS : Compliant | 1 : $0.1512
10 : $0.1512
50 : $0.1512
100 : $0.14175
500 : $0.1323
1,000 : $0.12285
3,000 : $0.10395
6,000 : $0.0945
15,000 : $0.0756
30,000 : $0.0756
|
| 6,000
|
RB715WFHTL
| ROHM Semiconductor | 40V, 0.03A, Schottky Barrier Diodes (支持 AEC-Q101)
RoHS : Compliant | 1 : $0.189
10 : $0.189
50 : $0.189
100 : $0.17955
500 : $0.16065
1,000 : $0.1512
3,000 : $0.12285
6,000 : $0.1134
15,000 : $0.10395
30,000 : $0.0945
|
| 3,000
|
RB715WMFHTL
| ROHM Semiconductor | 40V, 0.03A, 车载肖特基势垒二极管（AEC-Q101标准）
RoHS : Compliant | 1 : $0.0945
10 : $0.0945
50 : $0.0945
100 : $0.0945
500 : $0.08505
1,000 : $0.0756
3,000 : $0.06615
6,000 : $0.0567
15,000 : $0.0567
30,000 : $0.04725
|
| 3,000
|
RB715WMTL
| ROHM Semiconductor | 40V, 0.03A, 肖特基势垒二极管
RoHS : Compliant | 1 : $0.0756
10 : $0.0756
50 : $0.0756
100 : $0.0756
500 : $0.06615
1,000 : $0.06615
3,000 : $0.04725
6,000 : $0.04725
15,000 : $0.0378
30,000 : $0.0378
|
| 3,000
|
MIC37100-1.5WS-TR
| Microchip Technology Inc | MIC37100 Series 1.5 V Fixed Output 1 A Low Voltage µCap LDO Regulator - SOT-223
RoHS : Compliant | | 1,384
|
ComSIT USA | 102R15W102KV4E
 | Johanson Dielectrics Inc | AVAILABLE EU
RoHS : Compliant | | 4,209
|
THL304815WI
| Traco Power | AVAILABLE EU | | 24
|
ComSIT USA | NCP15WF104F03RC
| Murata Manufacturing Co Ltd | NTC Thermistor, 100000ohm, Surface Mount
RoHS : Compliant | | 30,000
|
NCP15WM474J03RC
| Murata Manufacturing Co Ltd | TEMPERATURE DEPENDENT RESISTOR NTC Thermistor, 470000ohm, Surface Mount
RoHS : Compliant | | 10,000
|
MKT1822510015W
| Vishay Intertechnologies | Film Capacitor, Polyester, 100V, 10% +Tol, 10% -Tol, 1uF, Through Hole Mount, 7130
RoHS : Compliant | | 5,200
|
102R15W102KV4E
| Johanson Dielectrics Inc | Ceramic Capacitor, Multilayer, Ceramic, 1000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.001uF, Surface Mount, 0805
RoHS : Compliant | | 3,000
|
L115WEYW
| Kingbright | T-1 (3 MM) BI-COLOR INDICATOR LAMP Dual Color LED, High Efficiency Red/yellow, Diffused White, T-1, 3mm
RoHS : Compliant | | 2,000
|
L115WEGWCODEFF6
| Kingbright | LED
RoHS : Compliant | | 1,000
|
AF82US15WSLB4U
| Intel Corporation | SCH CHIPSET Microprocessor Circuit, CMOS
RoHS : Compliant | | 384
|
AF82US15W
| Intel Corporation | SCH CHIPSET Microprocessor Circuit, CMOS
RoHS : Not Compliant | | 204
|
SDCMF10915W0T1
| spc | SD MEMORY CARD CONNECTOR TYPE C PCB Connector, 9 Contact(s), 1 Row(s), Right Angle, 0.098 inch Pitch, Surface Mount Terminal, Locking
RoHS : Compliant | | 195
|
X9315WMI
| Intersil Corporation | DIGITALLY CONTROLLED POTENTIOMETER (XDCP) Digital Potentiometer, 1 Func, 10000ohm, Increment/decrement Control Interface, 32 Positions, CMOS, PDSO8
RoHS : Not Compliant | | 160
|
SRD00515WE9241
| Siemens | Electronic Component
RoHS : Not Compliant | | 154
|
MT5A2415WI
| volgen | Analog Circuit
RoHS : Not Compliant | | 100
|
MCSI5KGI15WI
| Matra MHS | Electronic Component
RoHS : Not Compliant | | 51
|
CY7C245A15WC
| Cypress Semiconductor | 2K X 8 REPROGRAMMABLE REGISTERED PROM UVPROM, 2KX8, 10ns, CMOS, CDIP24
RoHS : Not Compliant | | 36
|
S3C215WDV
| Jel System Co Ltd | Solid State Relays SPST-NO (1 Form A) AC, Zero Cross
RoHS : Not Compliant | | 2
|
Interstate Connecting Components | 8D0-15W97PN L/C
| SOURIAU-SUNBANK | 8D SERIES SQ FLANGE RECEPT OD CAD L/C | 1 : $40.1053
5 : $38.7684
10 : $37.5178
25 : $34.2075
50 : $34.027
|
| 30
|
770-015115W1
| Glenair Inc | SHRINK BOOTS SHAPE MEMORY
RoHS : Compliant | 1 : $401.6603
2 : $348.3266
4 : $336.3604
7 : $292.815
10 : $244.6032
|
| 0
|
89013-15W04-06
| Glenair Inc | | | 0
|
8D015W19SN
| SOURIAU-SUNBANK | J5908 | | 0
|
8D0S15WUASNA
| SOURIAU-SUNBANK | | | 0
|
8D7L15W19SC046
| SOURIAU-SUNBANK | J5908 | | 0
|
8DA5-15W05SDL
| SOURIAU-SUNBANK | RFI Plug Integrated Bckshell OD Cad Less Contacts | 1 : $86.7549
5 : $83.863
10 : $81.1578
25 : $73.9967
50 : $69.8858
|
| 0
|
8DA5-15W18PE
| SOURIAU-SUNBANK | RFI Plug Integrated Bckshell OD Cad | 1 : $96.5342
5 : $93.3163
10 : $90.306
25 : $82.3378
50 : $77.7635
|
| 0
|
8DA5-15W19SA
| SOURIAU-SUNBANK | RFI Plug Integrated Bckshell OD Cad | 1 : $61.6823
5 : $70.4754
10 : $68.2021
25 : $62.1842
50 : $83.4584
|
| 0
|
8DAB03A15W
| SOURIAU-SUNBANK | J59412 | | 0
|
KJA0T15W18PAL
| ITT Interconnect Solutions | KJA0T15W18PAL
RoHS : Not Compliant | | 0
|
KJA7T15W35SN
| ITT Interconnect Solutions | KJA7T15W35SN
RoHS : Not Compliant | | 0
|
KJA0T15W35SNL
| ITT Interconnect Solutions | KJA0T15W35SNL
RoHS : Not Compliant | | 0
|
KJA7T15W97SA
| ITT Interconnect Solutions | KJA7T15W97SA
RoHS : Not Compliant | | 0
|
8D0C15W35PN
| SOURIAU-SUNBANK | J5908
RoHS : Not Compliant | | 0
|
NexGen Digital | LQG15WH1N4B02D
| Murata Manufacturing Co Ltd |
RoHS : Compliant | | 15,860
|
LQG15WH1N5C02D
| Murata Manufacturing Co Ltd |
RoHS : Compliant | | 10,975
|
NCU15WF104D6SRC
| Murata Manufacturing Co Ltd |
RoHS : Compliant | | 10,000
|
LQG15WH1N7B02D
| Murata Manufacturing Co Ltd |
RoHS : Compliant | | 3,759
|
MKT1817322015W
| Vishay Huntington | | | 2,500
|
LQG15WZ2N7C02D
| Murata Manufacturing Co Ltd |
RoHS : Compliant | | 447
|
NCU15WF104D60RC
| Murata Manufacturing Co Ltd |
RoHS : Compliant | | 172
|
PEI Genesis | 8D015W19SN
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 173
|
8D015W19SN-LC
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 173
|
89013-15W04-06
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
89013-15W07-12
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
8D015W15PA
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
8D015W97PA
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
8D115W05PE
| SOURIAU-SUNBANK |
RoHS : Not Compliant | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
8D115W15PN
| SOURIAU-SUNBANK |
RoHS : Not Compliant | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
8D115W97PN
| SOURIAU-SUNBANK |
RoHS : Not Compliant | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
8D3415W18PA
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
8D3415W35PB
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
8D3915W15PA
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
8D3915W19SN
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
8D3915W97PA
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
8D715W15SA
| SOURIAU-SUNBANK | | 1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0
|
| 0
|
PUI | LM1-5-W-G
| | | | 1,508
|
LM1-5-W-A
| | | | 1,500
|
LP1-5-W-R
| | | | 641
|
LP1-5-W-A
| | | | 397
|
LM1-5-W-R
| | | | 275
|
LP1-5-W-G
| | | | 16
|
LP1-5-W-R-BK
| | | | 11
|
CT0915W175KL
| | | | 5
|
M85049/79-15W03
| Amphenol Corporation | | | 2
|
Braemac Americas-Symmetry | WAP3015W08-H100D3B0A
| Kyocera AVX Components | WX-Family Wi-Fi 6E & 7 PCB antenna, 100mm cable, MHF4L connector - Radiation Pattern A
RoHS : Compliant | | 1
|
MAX1015.W.001
| Taoglas Antenna Solutions | 15-IN-1 WHITE PERMANENT MOUNT AN | | 0
|
ASB-EX15-WX11-GLB
| Digi International Inc | Digi EX15: 2 port GigE; RJ-45 RS232, Euro, Wi-Fi; CAT 11; LTE-A / HSPA+; Cellular certifications: Verizon, AT&T, Sprint, T-Mobile, PTCRB, CE, RED; International plug tips UK, EU, AU (INCLUDES PSU, POE | | 0
|
ASB-EX15-WX04-OUS
| Digi International Inc | Digi EX15: 2 port GigE; RJ-45 RS232, North American, Wi-Fi; CAT 4; LTE / HSPA+; Cellular certifications: Verizon, AT&T, PTCRB, Canada (INCLUDES PSU, POE INJECTOR, SITE SURVEY BATTERY, MOUNTING ACCESS | | 0
|
ASB-EX15-WX11-OUS
| Digi International Inc | Digi EX15: 2 port GigE; RJ-45 RS232, North America, Wi-Fi; CAT 11; LTE-A / HSPA+; Cellular certifications: Verizon, AT&T, Sprint, T-Mobile, PTCRB, Canada (INCLUDES PSU, POE INJECTOR, SITE SURVEY BATT | | 0
|
ASB-EX15-WXE4-GLB
| Digi International Inc | Digi EX15: 2 port GigE; RJ-45 RS232, Wi-Fi; CAT 4; LTE / HSPA+; Cellular certifications: PTCRB, CE, RED; International Plug tips for EU, AU and UK (INCLUDES PSU, POE INJECTOR, SITE SURVEY BATTERY, M | | 0
|
EX15-WX07-OUS
| Digi International Inc | Digi 360 Cellular Solution Package for Digi EX15 (1 year) - LTE, Cat 7, US/CAN, RS-232, 1 Serial Port, Wi-Fi, Dual Ethernet. Includes: PSU, PoE injector, site survey battery, mounting accessories, eth | | 0
|
ASB-EX15-WX06-GLB
| Digi International Inc | Digi EX15: 2 port GigE; RJ-45 RS232, Euro, Wi-Fi; CAT 6; LTE-A / HSPA+; Cellular certifications: Verizon, AT&T, Sprint, T-Mobile, PTCRB, CE, RED; International plug tips UK, EU, AU (INCLUDES PSU, POE | | 0
|
Chip-Germany GmbH | PSAA15W-480V
| Phihong USA | | | 15
|
ECCO | A850491115W
| Amphenol PCD | | | 19
|
M85049/11-15W
| Amphenol PCD | | | 19
|
Flip Electronics | ESS015W-0440-25
| Energy Recovery Products | Stock, Ship Today
RoHS : Compliant | | 2,150
|
ESS015W-0440-34
| Energy Recovery Products | Stock, Ship Today
RoHS : Compliant | | 1,650
|
ESSV015W-0300-42
| Energy Recovery Products | Stock, Ship Today | | 574
|
ESS015W-1000-12
| Energy Recovery Products | Stock, Ship Today
RoHS : Compliant | | 513
|
ESS015W-1050-14
| Energy Recovery Products | Stock, Ship Today
RoHS : Compliant | | 385
|
PLB15W-0300-38
| Energy Recovery Products | Stock, Ship Today | | 312
|
ESS015W-0350-32
| Energy Recovery Products | Stock, Ship Today
RoHS : Compliant | | 28
|
Maritex | BZX84C15W-7-F
| Diodes Incorporated | Zener Diodes; BZX84C15W-7-F; DIODES; 3; 15 V; 100 nA; Single
RoHS : Compliant | 1,000 : $0.471
500 : $0.514
100 : $0.662
30 : $0.765
10 : $0.875
1 : $1.107
|
| 2,698
|
JRC-23FHS1DC9V0.15W
| Ningbo Forward Relay Corporation Ltd | Electromagnetic relay; contact rating current 1A; coil voltage 9VDC; changeover contact (1C); coil power: 150mW; 1A/30VDC; 0.5A/125VAC | 500 : $0.307
100 : $0.358
20 : $0.409
5 : $0.46
1 : $0.588
|
| 1,240
|
JRC-23FHS1DC24V0.15W
| Ningbo Forward Relay Corporation Ltd | Electromagnetic relay; contact rating current 1A; coil voltage 24VDC; changeover contact (1C); coil power: 150mW; 1A/30VDC; 0.5A/125VAC | 500 : $0.611
100 : $0.675
20 : $0.742
5 : $0.772
1 : $0.808
|
| 984
|
JRC-23FHS1DC5V0.15W
| Ningbo Forward Relay Corporation Ltd | Electromagnetic relay; contact rating current 1A; coil voltage 12VDC; changeover contact (1C); moc cewki: 150mW; 1A/30VDC; 0.5A/125VAC | 500 : $0.537
100 : $0.611
20 : $0.645
5 : $0.709
1 : $0.742
|
| 585
|
JRC-23FHS1DC12V0.15W
| Ningbo Forward Relay Corporation Ltd | Electromagnetic relay; contact rating current 1A; coil voltage 12VDC; changeover contact (1C); moc cewki: 150mW; 1A/30VDC; 0.5A/125VAC | 500 : $0.611
100 : $0.675
20 : $0.742
5 : $0.772
1 : $0.808
|
| 283
|
ADBMS6815WCSWZ
| Analog Devices Inc | Battery Management ICs; ADBMS6815WCSWZ; ANALOG DEVICES; 48
RoHS : Compliant | 250 : $3.374
30 : $4.202
10 : $5.292
1 : $6.724
|
| 39
|
0297015.WXNV
| Littelfuse Inc | Fuses; 0297015.WXNV; LITTELFUSE; 4.58 m?; 15 A; Holder, Socket; 32 V
RoHS : Compliant | 6,000 : $0.064
3,000 : $0.07
500 : $0.082
150 : $0.094
50 : $0.116
5 : $0.153
1 : $0.4783
|
| 9
|
SYS1530-1215-W2E-2.1
| Sunny Electronics Corp | Power Supply; wall-mounted; 12W; 15V; 0.8A | 20 : $7.031
10 : $7.571
5 : $7.84
1 : $8.113
|
| 3
|
Pasternack Enterprises US | PE3C8815/WH
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/WH, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/WH is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/WH can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-WH coax. | | 593
|
PE3C8815/WH-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/WH-12, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/WH-12 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/WH-12 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax. | 1 : $50.09
25 : $47.59
50 : $45.08
100 : $43.08
|
| 209
|
PE3C8815/WH-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/WH-36, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/WH-36 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/WH-36 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax. | 1 : $53.09
25 : $50.44
50 : $47.78
100 : $45.66
|
| 200
|
PE3C8815/WH-72
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/WH-72, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/WH-72 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/WH-72 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax. | 1 : $57.79
25 : $54.9
50 : $52.01
100 : $49.7
|
| 100
|
PE3C8815/WH-120
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/WH-120, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/WH-120 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/WH-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax. | 1 : $74.89
25 : $71.15
50 : $67.4
100 : $64.41
|
| 60
|
PE3C8815/WH-300
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/WH-300, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/WH-300 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/WH-300 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax. | 1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06
|
| 24
|
PE3C7015/WP-60
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 4.3-10 Male (Plug) to N Male (Plug) Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to N male (plug) low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low loss 4.3-10 to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7015/WP-60 can also be known as a low loss 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7015/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C7015/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7015/WP-60 can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low loss 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01
|
| 0
|
PE3C7015/WP-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 4.3-10 Male (Plug) to N Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to N male (plug) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low loss 4.3-10 to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7015/WP-48 can also be known as a low loss 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7015/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C7015/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7015/WP-48 can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low loss 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01
|
| 0
|
PE3C7015/WP
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 4.3-10 Male (Plug) to N Male (Plug) Low Loss Cable Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to N male (plug) low loss cable using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low loss 4.3-10 to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7015/WP can also be known as a low loss 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7015/WP RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C7015/WP is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7015/WP can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low loss 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | | 0
|
PE3C7015/WP-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 4.3-10 Male (Plug) to N Male (Plug) Low Loss Cable 36 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to N male (plug) low loss cable 36 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low loss 4.3-10 to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7015/WP-36 can also be known as a low loss 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7015/WP-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C7015/WP-36 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7015/WP-36 can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low loss 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $154.99
25 : $147.24
50 : $139.49
100 : $133.29
|
| 0
|
PE3C7015/WP-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 4.3-10 Male (Plug) to N Male (Plug) Low Loss Cable 24 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to N male (plug) low loss cable 24 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low loss 4.3-10 to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7015/WP-24 can also be known as a low loss 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7015/WP-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C7015/WP-24 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7015/WP-24 can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low loss 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71
|
| 0
|
Relay Specialties | LM1-5-W-G
| Switch Components Inc | LED Indicator 5mm - Green, Scr ew - 12V | 1 : $33.15
10 : $30.6
25 : $28.41
50 : $26.52
100 : $26.2
|
| 1,508
|
LM1-5-W-A
| Switch Components Inc | LED Indicator 5mm - Amber, Scr ew - 12V | 1 : $45.09
10 : $40.08
25 : $30.06
50 : $30.06
100 : $30.06
|
| 1,500
|
LP1-5-W-R
| Switch Components Inc | LED Indicator 5mm - Red, Snap- In - 12V | 1 : $9.19
10 : $8.48
25 : $7.88
50 : $7.35
100 : $7.12
|
| 641
|
LP1-5-W-A
| Switch Components Inc | LED Indicator 5mm - Amber, Sna p-In - 12V | 1 : $5.02
10 : $4.63
25 : $4.3
50 : $4.02
100 : $3.78
|
| 397
|
LM1-5-W-R
| Switch Components Inc | LED Indicator 5mm - Red, Screw - 12V V | 1 : $35.23
10 : $32.52
25 : $30.2
50 : $28.18
100 : $27.87
|
| 275
|
LP1-5-W-G
| Switch Components Inc | LED Indicator 5mm - Green, Sna p-In - 12V | 1 : $7.1
10 : $6.56
25 : $6.09
50 : $5.68
100 : $5.45
|
| 16
|
WN6015W-8
| Panasonic Electronic Components | PEWA-IWSD WALL PLATE, FULL-COL | | 5
|
Waytek, Inc. | 0297015.WXNV
| Littelfuse Inc | 15 Amp Mini Automotive Fuse Blue 32V
RoHS : Compliant | 50 : $0.2204
200 : $0.199
500 : $0.1719
1,000 : $0.1574
5,000 : $0.1373
|
| 144,868
|
18/1 UL1015 WHITE
| Unified Wire and Cable Inc | 18GA White MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW | 250 : $0.1568
500 : $0.1217
1,000 : $0.1099
2,500 : $0.0934
5,000 : $0.0838
|
| 26,250
|
16/1 UL1015 WHITE
| Unified Wire and Cable Inc | 16GA White MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW | 250 : $0.238
500 : $0.1847
1,000 : $0.1667
2,000 : $0.1418
5,000 : $0.1272
|
| 13,000
|
10/1 UL1015 WHITE
| Unified Wire and Cable Inc | 10GA White MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW | 250 : $0.4939
500 : $0.4408
1,000 : $0.4243
2,000 : $0.4144
|
| 13,000
|
14/1 UL1015 WHITE
| Unified Wire and Cable Inc | 14GA White MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW | 250 : $0.3564
500 : $0.2766
1,000 : $0.2265
1,500 : $0.211
5,000 : $0.1904
|
| 12,750
|
12/1 UL1015 WHITE
| Unified Wire and Cable Inc | 12GA White MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW | 250 : $0.5604
500 : $0.3986
1,000 : $0.344
3,000 : $0.3015
|
| 4,000
|
20/1 UL1015 WHITE
| Unified Wire and Cable Inc | 20GA White MWT/AWM Wire Tinned Copper 600V, 1000V DISC WAY | 250 : $0.0664
500 : $0.0617
1,000 : $0.057
2,500 : $0.0536
5,000 : $0.0501
|
| 2,750
|
LM1-5-W-R
| Switch Components Inc | Red LED Panel Mount 12V Metal Body-Wire Leads | 1 : $3.1173
50 : $2.5999
100 : $2.2549
200 : $2.1316
500 : $2.0207
|
| 1,091
|
LM1-5-W-A
| Switch Components Inc | Amber LED Panel Mount 12V Metal Body-Wire Leads | 1 : $3.4444
50 : $2.8727
100 : $2.4914
200 : $2.3552
500 : $2.2327
|
| 948
|
LM1-5-W-G
| Switch Components Inc | Green LED Panel Mount 12V Metal Body-Wire Leads | 1 : $3.4444
50 : $2.8727
100 : $2.4914
200 : $2.3552
500 : $2.2327
|
| 913
|
15W47-B
| Leviton Manufacturing Co | Leviton 15W47-B Wetguard watertight straight blade connector is an industrial-grade NEMA 5-15R, 2P, 3W receptacle for demanding power connections. It features IP66, IP67 and IP69K ingress protection, a tongue-and-groove seal against water and debris, and operates from -40F to 140F. | 1 : $32.45
10 : $31.66
20 : $31.15
50 : $30.36
100 : $29.85
|
| 27
|
Wuhan P&S | ESDA6V1-5W6
| STMicroelectronics | 6.1V,1mA,Unidirectional TRANSIL array for data protection
RoHS : Compliant | 1 : $0.11
100 : $0.1
500 : $0.1
1,000 : $0.09
|
| 3,000
|
Portuguese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Polish
Vietnamese
Indian
Mexican
British
New Zealand