| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty.
BuyNow |
TME | 55PC0111-16-9
| TE Connectivity | Wire; HookUp Wire; Cu; 16AWG; 600V
RoHS : Compliant | 500 : $1.79
300 : $1.8
100 : $2.06
50 : $2.14
30 : $2.25
27 : $2.8
|
| 3,600
 |
55A0111-16-2
| TE Connectivity | Wire; Cu; 1.23mm2; 16AWG; 600V; 100m
RoHS : Compliant | 200 : $2.89
100 : $3.25
50 : $3.33
30 : $3.44
19 : $3.99
|
| 2,400
|
55A1111-16-9-9CS3477
| TE Connectivity | 55A1111-16-9-9CS3477
RoHS : Compliant | 1,900 : $2.04
700 : $2.13
200 : $2.22
35 : $2.57
|
| 2,071
|
1-111626-0
| TE Connectivity | Connector: IDC; female; PIN: 44; straight; 500mA; for ribbon cable
RoHS : Not Compliant | | 540
|
55PC0111-16-90
| TE Connectivity | Wire; HookUp Wire; Cu; 16AWG; 600V
RoHS : Compliant | | 440
|
55PC0111-16-6
| TE Connectivity | Wire; Cu
RoHS : Compliant | 100 : $2.86
50 : $2.94
30 : $3.05
21 : $3.61
|
| 145
|
53111160
| Lapp Group | Cable gland; M50; 1.5; IP68,IP69K; polyamide; dark grey; SKINTOP®
RoHS : Compliant | 100 : $6.75
25 : $7.21
5 : $7.68
1 : $8.38
|
| 2
|
14311116102000
| HARTING Technology Group | Connector: wire-board; plug; female; PIN: 11; har-flexicon®; 250V | 5 : $7.68
3 : $8.7
1 : $9.72
|
| 0
 |
1111116
| Bossard Group | Lifting eye bolt; M12; M12x120; 1.75; Head: eye; steel; zinc; 12mm | 250 : $2.43
125 : $2.72
25 : $3.04
|
| 0
|
17-111164
| Amphenol CONEC | Connector: RJ45 | | 0
|
KD7 11111161118
| LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature | | 0
|
KD7 44111161120
| LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature | | 0
|
KD7 44111161121
| LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature | | 0
|
KD7 11111161121
| LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature | | 0
|
KD7 44111162010
| LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature | | 0
|
ComSIT USA | 750811116
| Wurth Electronics Midcom | AVAILABLE EU | | 19
|
ComSIT USA | W48C11116H
| Cypress Semiconductor | FREQUENCY GENERATOR FOR INTEGRATED CORE LOGIC Processor Specific Clock Generator, 100MHz, CMOS, PDSO28
RoHS : Not Compliant | | 45
|
NexGen Digital | 110-A-111/16
| WECO Electrical Connectors | | | 1,000
|
EBV Elektronik | FA11116_LXP-O-90
| LEDIL | LXP Lenses For CREEXPE LEDs (Alt: FA11116_LXP-O-90)
RoHS : Compliant | | 0
|
Pasternack Enterprises US | PE3M0111-16
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/119-RG174-0XDS2, RF Cable Type: M17/119-RG174, RF Cable Impedance: 50 Ohm, Length: 16 inches. MIL-DTL-17 SMA Male to TNC Male Cable 16 Inch Length Using M17/119-RG174 Coax., Radio frequency assembly MIL-DTL-17 SMA male to TNC male cable 16 inch length using M17/119-RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to TNC male cable 16 inch length using M17/119-RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3026 SMA to M39012/26-0018 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3026 SMA cable connection on one end and M39012/26-0018 TNC cable connection on the other. Our M39012/55-3026 SMA to M39012/26-0018 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3026 SMA to M39012/26-0018 TNC cable is a male to male coax assembly, PE3M0111-16, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly PE3M0111-16 is built with M17/119-RG174 which is a flexible coax type. The Pasternack flexible M39012/55-3026 SMA cable assembly is manufactured with M39012/55-3026 SMA to M39012/26-0018 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/55-3026 SMA male to M39012/26-0018 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0111-16 can also be used in the other direction and will be M39012/26-0018 TNC male to M39012/55-3026 SMA male cable assembly if the opposite connectivity is required. M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3026 SMA to M39012/26-0018 TNC cable assembly for quick shipment worldwide. Variations of M39012/55-3026 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to TNC male cable 16 inch length using M17/119-RG174 coax. | 1 : $269.99
25 : $256.49
50 : $242.99
|
| 6
|
PE3W11116
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FL, RF Cable Type: PE-SR401FL, RF Cable Impedance: 50 Ohm. | | 0
|
PE3C11116
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Male Low Loss Cable Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C11116 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. | | 0
|
PE3C11116-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to TNC Male Low Loss Cable 36 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-36 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-36 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-36 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-36 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-36 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. | 1 : $447.02
10 : $429.14
25 : $411.26
100 : $393.38
|
| 0
|
PE3C11116-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to TNC Male Low Loss Cable 24 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-24 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-24 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-24 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-24 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-24 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. | 1 : $418.83
10 : $402.08
25 : $385.32
100 : $368.57
|
| 0
|
PE3C11116-60
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to TNC Male Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-60 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-60 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-60 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-60 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-60 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. | 1 : $503.4
10 : $483.26
25 : $463.13
100 : $442.99
|
| 0
|
PE3C11116-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to TNC Male Low Loss Cable 12 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-12 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-12 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-12 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-12 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-12 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. | 1 : $390.63
10 : $375.0
25 : $359.38
100 : $343.75
|
| 0
|
PE3C11116-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to TNC Male Low Loss Cable 48 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-48 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-48 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-48 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-48 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-48 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. | 1 : $475.21
10 : $456.2
25 : $437.19
100 : $418.18
|
| 0
|
TE Connectivity | 82A0111-16-9
| TE Connectivity | 82A0111-16-9 Cable Type: Spec 80 Operating Voltage: 600 V Wire & Cable Insulation Material: Modified Radiation Cross-linked ETFE Polymer Conductor Material: Tin-Coated Copper Wire Size: 16 AWG Spec 80 600 V Modified Radiation Cross-linked ETFE Polymer Tin-Coated Copper | Hook Up Wire | Part Number: 82A0111-16-9 | Internal Number: 562243-000 | Alias Number: 5-1194442-9 | 16 AWG | TE Connectivity
RoHS : Compliant | | 26,566
|
55A0111-16-9
| TE Connectivity | 55A0111-16-9 Cable Type: Spec 55 Operating Voltage: 600 V Wire & Cable Insulation Material: Modified Radiation Cross-linked ETFE Polymer Conductor Material: Tin-Coated Copper Wire Size: 16 AWG Spec 55 600 V Modified Radiation Cross-linked ETFE Polymer Tin-Coated Copper | Hook Up Wire | Part Number: 55A0111-16-9 | Internal Number: 216016-004 | Alias Number: 9-1191561-4 | 16 AWG | TE Connectivity
RoHS : Compliant | | 6,413
|
1-111614-0
| TE Connectivity | 044 STRAIN RELIEF 2MM Connector Cover Type: Strain Relief Cover Primary Product Color: Black Primary Product Material: Polyester Number of Positions: 44 Operating Temperature (Max): 105 °C Strain Relief Cover Black | Connector Cap & Cover | Part Number: 1-111614-0 | Internal Number: 1-111614-0 | Polyester | TE Connectivity
RoHS : Compliant | 1,000 : $0.73
500 : $0.75
250 : $0.77
100 : $0.8
50 : $0.82
1 : $0.9
|
| 2,978
|
1-111623-9
| TE Connectivity | 14, 2MM, POL,30 DP, LEAD FREE Connector System: Wire-to-Board Number of Positions: 14 Centerline (Pitch): 2 mm Centerline (Pitch): .079 in Row-to-Row Spacing: 2 mm Wire-to-Board 14 2 mm .079" | Ribbon Cable Connector | Part Number: 1-111623-9 | Internal Number: 1-111623-9 | TE Connectivity
RoHS : Compliant | 1,000 : $4.07
500 : $4.26
250 : $4.47
100 : $4.69
50 : $4.94
25 : $5.3
10 : $5.66
1 : $6.71
|
| 2,509
|
1-111626-7
| TE Connectivity | 10, 2MM, 30 DP, LEAD FREE Connector System: Wire-to-Board Number of Positions: 10 Centerline (Pitch): 2 mm Centerline (Pitch): .079 in Row-to-Row Spacing: 2 mm Wire-to-Board 10 2 mm .079" | Ribbon Cable Connector | Part Number: 1-111626-7 | Internal Number: 1-111626-7 | TE Connectivity
RoHS : Compliant | 1,000 : $4.61
500 : $4.74
250 : $4.89
100 : $5.05
50 : $5.2
1 : $5.7
|
| 1,084
|
1-111626-9
| TE Connectivity | 20, 2MM, 30 DP, LEAD FREE Connector System: Wire-to-Board Number of Positions: 20 Centerline (Pitch): 2 mm Centerline (Pitch): .079 in Row-to-Row Spacing: 2 mm Wire-to-Board 20 2 mm .079" | Ribbon Cable Connector | Part Number: 1-111626-9 | Internal Number: 1-111626-9 | TE Connectivity
RoHS : Compliant | 1,000 : $5.48
500 : $5.63
250 : $5.81
100 : $6.0
50 : $6.18
1 : $6.78
|
| 403
|
1-111626-8
| TE Connectivity | 14, 2MM, 30 DP, LEAD FREE Connector System: Wire-to-Board Number of Positions: 14 Centerline (Pitch): 2 mm Centerline (Pitch): .079 in Row-to-Row Spacing: 2 mm Wire-to-Board 14 2 mm .079" | Ribbon Cable Connector | Part Number: 1-111626-8 | Internal Number: 1-111626-8 | TE Connectivity
RoHS : Compliant | 1,000 : $5.32
500 : $5.47
250 : $5.64
100 : $5.83
50 : $6.0
1 : $6.59
|
| 366
|
Portuguese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Polish
Vietnamese
Indian
Mexican
British
New Zealand