| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty.
BuyNow |
Chip-Germany GmbH | 5,1103E+11
| ODU Steckverbindungssysteme Gmbh & Co Kg | | | 374
 |
5,1103E+14
| ODU Steckverbindungssysteme Gmbh & Co Kg | | | 212
|
RH010390R0FC02
| Vishay Intertechnologies |
RoHS : Not Compliant | | 78
|
2065103
| Molex | | | 40
|
222233660103 BFC233660103
| Vishay BCcomponents | | | 28
|
DSC1033BI2-024.0000T
| Discera | | | 15
|
LTC4210-3IS6
 | Linear Technology |
RoHS : Not Compliant | | 8
|
103-314-04
| MARL International Limited |
RoHS : Compliant | | 8
|
ST5EMW103
| Nidec Copal Electronics Corporation | | | 5
|
4116R-1-103LF
| Bourns Inc |
RoHS : Compliant | | 4
|
SSW-103-22-SM-D-VS
| Samtec Inc |
RoHS : Compliant | | 2
|
DGS60-A1A04096 1032293
| SICK AG | | | 2
|
CRCW2010390RJNEF
| Vishay Intertechnologies |
RoHS : Compliant | | 2
|
SV3431.030 GRÖßE NH000
| Ritmer | | | 2
|
PKI10A 930103-188 60V 35A GRÜN/GELB
| | | | 1
|
Component Electronics, Inc | CR10-3320F-T
| KYOCERA Corporation | IN STOCK SHIP TODAY | 1,000 : $0.08
100 : $0.09
1 : $0.12
|
| 5,000
 |
CRCW12103R3JRT1
| KOA Speer Electronics Inc | IN STOCK SHIP TODAY | 1,000 : $0.25
100 : $0.29
1 : $0.38
|
| 5,000
|
CRCW2512103JRT1
| Vishay Intertechnologies | IN STOCK SHIP TODAY
RoHS : Not Compliant | 1,000 : $0.25
100 : $0.29
1 : $0.38
|
| 1,984
|
L103C103
| TT electronics / BI Technologies | IN STOCK SHIP TODAY
RoHS : Unknown | 1,000 : $1.5
100 : $1.73
1 : $2.31
|
| 1,000
|
F1710-310-1030
| Vishay Intertechnologies | IN STOCK SHIP TODAY | 1,000 : $2.0
100 : $2.31
1 : $3.08
|
| 727
|
C3216X7R1H103KT050A
| TDK Corporation | IN STOCK SHIP TODAY | 1,000 : $0.28
100 : $0.32
1 : $0.42
|
| 500
|
MSS1038-103NLC
| Coilcraft Inc | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $1.5
100 : $1.73
1 : $2.31
|
| 472
|
103310-3
| TE Connectivity | IN STOCK SHIP TODAY
RoHS : Not Compliant | 1,000 : $1.25
100 : $1.44
1 : $1.92
|
| 249
|
103
| Keystone Electronics Corp | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $1.0
100 : $1.15
1 : $1.54
|
| 206
|
BSW-103-04-L-D-S
| Samtec Inc | IN STOCK SHIP TODAY
RoHS : Compliant | | 20
|
586-1103-103
| Dialight | IN STOCK SHIP TODAY
RoHS : Not Compliant | 1,000 : $5.0
100 : $5.77
1 : $7.69
|
| 18
|
FTR-103-02-S-S
| Samtec Inc | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $5.0
100 : $5.77
1 : $7.69
|
| 14
|
CKR11BX103KS
| Kyocera AVX Components | IN STOCK SHIP TODAY
RoHS : Not Compliant | 1,000 : $0.5
100 : $0.58
1 : $0.77
|
| 8
|
CLP-103-02-G-D
| Samtec Inc | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $2.0
100 : $2.31
1 : $3.08
|
| 5
|
PWC-4103-72141031
| NEC Electronics Group | IN STOCK SHIP TODAY | 1,000 : $37.5
100 : $43.27
1 : $57.69
|
| 2
|
DB Roberts | FHS1032X5/8-SL-SS
| FLAT HEAD MACHINE S | Flat Head Machine Screw | 1 : $0.0958
100 : $0.0626
281 : $0.0626
|
| 281
|
FHS1032X1/2-PH-SS-UC
| FLAT HEAD MACHINE S | Flat Head Machine Screw | 1 : $0.1085
100 : $0.0709
105 : $0.0709
|
| 105
|
103
| Essentra Components | | | 0
|
4103-1032-A-23
| RAF Electronic Hardware | ALUMINUM-RD M/F STAN | | 0
|
0010310300VR
| Essentra Components | | | 0
|
4103-1032-SS
| RAF Electronic Hardware | | | 0
|
31031031B
| Essentra Components | SHOULDER SCREW, HEX SOCKET, 14 | | 0
|
E5-1-031-030
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
4103-1032-S-12
| RAF Electronic Hardware | | | 0
|
31031031
| Essentra Components | SHOULDER SCREW, HEX SOCKET, 14 | | 0
|
31031037B
| Essentra Components | SHOULDER SCREW, HEX SOCKET, 14 | | 0
|
31031037
| Essentra Components | SHOULDER SCREW, HEX SOCKET, 14 | | 0
|
E5-1-031-031
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
FH-103-12ZI
| PennEngineering (PEM) | | | 0
|
EM-10-30
| Southco | EM-10-30 | | 0
|
EBV Elektronik | MCL103A-TR
| Vishay Intertechnologies | (Alt: MCL103A-TR)
RoHS : Compliant | | 685,000
|
BAV103 L0G
| Taiwan Semiconductor | Diode High Voltage Switching 250V 02A 2Pin MiniMELF TR (Alt: BAV103 L0G)
RoHS : Compliant | | 60,000
|
SD103B-TAP
| Vishay Intertechnologies | (Alt: SD103B-TAP)
RoHS : Compliant | | 40,000
|
NTR5103NT1G
| onsemi | Power MOSFET N Channel 60 V 260 mA 25 ohm SOT23 Surface Mount (Alt: NTR5103NT1G)
RoHS : Compliant | | 21,000
|
STM32F103ZFT6
 | STMicroelectronics | MCU 32bit STM32F ARM Cortex M3 RISC 768 KB Flash 25V33V 144Pin LQFP (Alt: STM32F103ZFT6)
RoHS : Compliant | | 8,820
|
STM8S103F3P3TR
 | STMicroelectronics | MCU 8bit STM8S STM8 CISC 8KB Flash 33V5V 20Pin TSSOP TR (Alt: STM8S103F3P3TR)
RoHS : Compliant | | 5,000
|
GWCSSRM3.PM-MFN5-A10310-1-700-R33
| ams OSRAM Group | LED Lighting OSLON Square White Warm 2200K 28V 700mA 120 1212 3030 Metric (Alt: Q65113A4863)
RoHS : Compliant | | 3,000
|
LS103A-GS08
| Vishay Intertechnologies | (Alt: LS103A-GS08)
RoHS : Compliant | | 2,500
|
103SYGD/S530-E2
| Everlight Electronics Co Ltd | (Alt: 3701030104)
RoHS : Compliant | | 1,500
|
STM32F103VFT6
 | STMicroelectronics | ARM MCU Motor Control STM32 Family STM32F1 Series Microcontrollers ARM CortexM3 32 bit 72 MHz (Alt: STM32F103VFT6)
RoHS : Compliant | | 1,440
|
TCS34103M
| ams OSRAM Group | Photo Sensor LED 18V I2C 6Pin OLGA (Alt: Q65114A1293)
RoHS : Compliant | | 1,000
|
STM32F103C6T6A
 | STMicroelectronics | ARM MCU Motor Control STM32 Family STM32F1 Series Microcontrollers ARM CortexM3 32 bit 72 MHz (Alt: STM32F103C6T6A)
RoHS : Compliant | | 1,000
|
STM32F103ZCH6
 | STMicroelectronics | ARM MCU Motor Control STM32 Family STM32F1 Series Microcontrollers ARM CortexM3 32 bit 72 MHz (Alt: STM32F103ZCH6)
RoHS : Compliant | | 368
|
STM32F103RDT6
 | STMicroelectronics | MCU 32bit STM32F ARM Cortex M3 RISC 384KB Flash 25V33V 64Pin LQFP Tray (Alt: STM32F103RDT6)
RoHS : Compliant | | 160
|
ACNW3410-300E
| Broadcom Limited | Optocoupler 1 Channel Surface Mount DIP 8 Pins 5 kV (Alt: ACNW3410-300E)
RoHS : Compliant | | 126
|
ECCO | 1030376000
| ITT Interconnect Solutions | | | 241
|
101-0342-000
| ITT Interconnect Solutions | | | 216
|
103-0352-000
| ITT Interconnect Solutions | | | 201
|
351-0329-000
| ITT Interconnect Solutions | | | 143
|
101-0346-000
| ITT Interconnect Solutions | | | 100
|
1010346000
| ITT Interconnect Solutions | | | 100
|
04410310006
| Amphenol Tuchel | | | 100
|
3510337000
| ITT Interconnect Solutions | | | 68
|
CM111-03-0250-036
| ECCO Connectors | | | 41
|
1030361000
| ITT Interconnect Solutions | | | 22
|
CM111-03-1000-048
| ECCO Connectors | | | 11
|
04410310003
| Amphenol Tuchel | | | 2
|
103-0389-000
| ITT Interconnect Solutions | | | 1
|
CM111-03-0500-048
| ECCO Connectors | | | 1
|
DAA3119P601-103
| Amphenol Aerospace | | | 1
|
FDH Electronics | LF-103A103-03M
| ELECTRO ENTERPRISES INC | Data Bus | 1 : $122.0
5 : $122.0
10 : $122.0
25 : $122.0
50 : $122.0
100 : $122.0
250 : $122.0
500 : $122.0
1,000 : $122.0
2,500 : $122.0
10,000 : $122.0
|
| 973
|
LF-103A103-1M
| ELECTRO ENTERPRISES INC | Data Bus | 1 : $128.0
5 : $128.0
10 : $128.0
25 : $128.0
50 : $128.0
100 : $128.0
250 : $128.0
500 : $128.0
1,000 : $128.0
2,500 : $128.0
10,000 : $128.0
|
| 973
|
LF-103B103-8M
| ELECTRO ENTERPRISES INC | Data Bus | 1 : $210.0
5 : $210.0
10 : $210.0
25 : $210.0
50 : $210.0
100 : $210.0
250 : $210.0
500 : $210.0
1,000 : $210.0
2,500 : $210.0
10,000 : $210.0
|
| 381
|
LF-103B103-2M
| ELECTRO ENTERPRISES INC | Data Bus | 1 : $150.0
5 : $150.0
10 : $150.0
25 : $150.0
50 : $150.0
100 : $150.0
250 : $150.0
500 : $150.0
1,000 : $150.0
2,500 : $150.0
10,000 : $150.0
|
| 381
|
LF-103C103-1M
| ELECTRO ENTERPRISES INC | Data Bus | 1 : $130.0
5 : $130.0
10 : $130.0
25 : $130.0
50 : $130.0
100 : $130.0
250 : $130.0
500 : $130.0
1,000 : $130.0
2,500 : $130.0
10,000 : $130.0
|
| 326
|
LF-103C103-15.5M
| ELECTRO ENTERPRISES INC | Data Bus | 1 : $218.0
5 : $218.0
10 : $218.0
25 : $218.0
50 : $218.0
100 : $218.0
250 : $218.0
500 : $218.0
1,000 : $218.0
2,500 : $218.0
10,000 : $218.0
|
| 135
|
CA-103A103-420
| ELECTRO ENTERPRISES INC | Data Bus | 1 : $68.362
5 : $68.362
10 : $62.781
25 : $53.97
50 : $53.97
100 : $52.14
250 : $50.431
500 : $50.431
1,000 : $50.431
2,500 : $50.431
10,000 : $50.431
|
| 92
|
Y10300013103000PSF
| TE Connectivity | Uncategorized | 1 : $2.911
5 : $2.911
10 : $2.911
25 : $2.911
50 : $2.911
100 : $2.519
250 : $2.519
500 : $2.183
1,000 : $2.047
2,500 : $1.955
10,000 : $1.955
|
| 81
|
CA-103B103-8
| ELECTRO ENTERPRISES INC | Data Bus | 1 : $140.0
5 : $140.0
10 : $140.0
25 : $140.0
50 : $140.0
100 : $140.0
250 : $140.0
500 : $140.0
1,000 : $140.0
2,500 : $140.0
10,000 : $140.0
|
| 54
|
CA-103A103-720
| ELECTRO ENTERPRISES INC | Data Bus | 1 : $250.0
5 : $250.0
10 : $250.0
25 : $250.0
50 : $250.0
100 : $250.0
250 : $250.0
500 : $250.0
1,000 : $250.0
2,500 : $250.0
10,000 : $250.0
|
| 46
|
CA-103C103-120
| ELECTRO ENTERPRISES INC | Data Bus | 1 : $140.0
5 : $140.0
10 : $140.0
25 : $140.0
50 : $140.0
100 : $140.0
250 : $140.0
500 : $140.0
1,000 : $140.0
2,500 : $140.0
10,000 : $140.0
|
| 36
|
CA-103C103-264
| ELECTRO ENTERPRISES INC | Data Bus | 1 : $180.0
5 : $180.0
10 : $180.0
25 : $180.0
50 : $180.0
100 : $180.0
250 : $180.0
500 : $180.0
1,000 : $180.0
2,500 : $180.0
10,000 : $180.0
|
| 27
|
CA-103A103-144
| ELECTRO ENTERPRISES INC | Data Bus | 1 : $47.809
5 : $47.809
10 : $43.906
25 : $37.744
50 : $37.744
100 : $36.464
250 : $35.269
500 : $35.269
1,000 : $35.269
2,500 : $35.269
10,000 : $35.269
|
| 10
|
LF-103D103-8M
| ELECTRO ENTERPRISES INC | Data Bus | 1 : $340.0
5 : $340.0
10 : $340.0
25 : $340.0
50 : $340.0
100 : $340.0
250 : $340.0
500 : $340.0
1,000 : $340.0
2,500 : $340.0
10,000 : $340.0
|
| 3
|
CA-103B510-315
| ELECTRO ENTERPRISES INC | Data Bus | | 1
|
Flip Electronics | NCP103BMX250TCG
| onsemi | Stock, Ship Today
RoHS : Compliant | | 152,000
|
LPC1112LVFHI33/103
 | NXP Semiconductors | Stock, Ship Today
RoHS : Compliant | | 39,200
|
PCP1103-P-TD-H
| onsemi | Stock, Ship Today
RoHS : Compliant | | 36,000
|
P3T1035GUKAZ
| NXP Semiconductors | Stock | | 24,500
|
NCP103AMX260TCG
| onsemi | Stock, Ship Today
RoHS : Compliant | | 13,160
|
NCP103BMX185TBG
| onsemi | Stock, Ship Today
RoHS : Compliant | | 9,662
|
P3T1035CUKAZ
| NXP Semiconductors | Stock | | 7,000
|
S25FS128SAGMFV103
| Cypress Semiconductor | Stock
RoHS : Compliant | | 6,020
|
NCP103AMX160TCG
| onsemi | Stock, Ship Today
RoHS : Compliant | | 6,000
|
LPC1114LVFHN24/103
 | NXP Semiconductors | Stock
RoHS : Compliant | | 5,880
|
NB3N51032DTR2G
| onsemi | Stock, Ship Today
RoHS : Compliant | | 5,000
|
R7F103GLJ3ZFB#UA0
| Renesas Electronics Corporation | Stock | | 2,720
|
NCP103AMX345TCG
| onsemi | Stock, Ship Today
RoHS : Compliant | | 2,113
|
R7F103GBJ3ZFP#UA0
| Renesas Electronics Corporation | Stock | | 2,000
|
LPC2103FBD48,118
 | NXP Semiconductors | Stock, Ship Today
RoHS : Compliant | | 2,000
|
Maritex | C1005B103K500NT
| Guangdong Hottech Industrrial Co | Ceramic capacitor SMD; 0402; 10nF; 50V; X7R; 10% | 10,000 : $0.002
5,000 : $0.004
1,000 : $0.009
1 : $0.029
|
| 109,201
|
0805B103K500NT
 | Fenghua (HK) Electronics Ltd | Ceramic capacitor SMD; 0805; 10nF; 50V; X7R; 10%
RoHS : Compliant | 100,000 : $0.004
12,000 : $0.004
4,000 : $0.005
1,000 : $0.005
100 : $0.013
1 : $0.04
|
| 63,870
|
RCA103KJLF
| Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA103KJLF; HKR | 3,000 : $0.003
1,000 : $0.003
100 : $0.004
1 : $0.013
|
| 50,000
|
RCA1033RJLF
| Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA1033RJLF; HKR | 3,000 : $0.003
1,000 : $0.003
100 : $0.004
1 : $0.013
|
| 50,000
|
JS-1121-03
| Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 3.96mm; 3-contacts; female; applicable wire AWG#18-22; 250V/7A | 1,000 : $0.017
500 : $0.018
1 : $0.022
|
| 46,960
|
UMK107B7103KAHT
| TAIYO YUDEN | Ceramic Capacitors; UMK107B7103KAHT; TAIYO YUDEN; 10 nF; 0603; 50 V; 1.6002 mm
RoHS : Compliant | | 29,883
|
JS-8001-03
| Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 2.54mm; 3-contacts; female; applicable wire AWG#22-28; 250V/3A | 5,000 : $0.011
1,000 : $0.015
500 : $0.018
1 : $0.02
|
| 17,672
|
WH06-1C 103 - 10K ROHS
| Allconnect | Semi-fix SMD potentiometer; PRM6H103; 10k; 5x2.5mm | 2,000 : $0.029
500 : $0.03
200 : $0.034
1 : $0.036
|
| 11,151
|
C1608B103K101NT
| Guangdong Hottech Industrrial Co | Ceramic capacitor SMD; 0603; 10nF; 100V; X7R; 10% | | 4,000
|
C0402C103K4RECAUTO
| KEMET Corporation | Ceramic Capacitors; C0402C103K4RECAUTO; KEMET; 10 nF; 16 V
RoHS : Compliant | 2,000 : $0.005
1,000 : $0.005
200 : $0.006
20 : $0.008
1 : $0.024
|
| 3,982
|
C1608N103J500NT
| Guangdong Hottech Industrrial Co | Ceramic capacitor SMD; 0603; 10nF; 50V; C0G; 5% | | 3,025
|
CFR02SJ0103A10
| Royal Electronic Factory (Thailand) Co Ltd | Carbon resistor; 10K; 5%; 2W; 5x12
RoHS : Compliant | 3,000 : $0.023
1,000 : $0.023
500 : $0.033
100 : $0.036
1 : $0.051
|
| 1,765
|
C0402C103K5RAC7867
 | KEMET Corporation | Ceramic Capacitors; C0402C103K5RAC7867; KEMET
RoHS : Compliant | 4,000 : $0.002
1,000 : $0.002
200 : $0.003
9 : $0.003
1 : $0.011
|
| 9
|
C0402C103K4RACAUTO
| KEMET Corporation | Ceramic Capacitors; C0402C103K4RACAUTO; KEMET; 10 nF; 0402; 16 V; 16 V
RoHS : Compliant | 10,000 : $0.004
5,000 : $0.005
1,500 : $0.006
500 : $0.007
1 : $0.009
|
| 5
|
MCASU168SB7103KTNA01
| TAIYO YUDEN | Ceramic Capacitors; MCASU168SB7103KTNA01; TAIYO YUDEN; 10 nF; 50 V; 1.6 mm
RoHS : Compliant | 25,000 : $0.006
5,000 : $0.006
1,500 : $0.007
500 : $0.007
2 : $0.01
1 : $0.031
|
| 2
|
Neutron USA | 3549S-2AC-103/103B
| Bourns Inc | Precision Potentiometers PRECISION POT-7/8" 22MM DIA 10T WW
RoHS : Compliant | | 50
|
3386H-1-103LF
| Bourns Inc | Trimmer Resistors - Through Hole 3/8" 10Kohms 10% 0.5Watts Square
RoHS : Compliant | | 50
|
3549S-1AC-103B
| Bourns Inc | Precision Potentiometers PREC POT 10K .1% 7/8" 22MM DIA 10T WW
RoHS : Compliant | | 50
|
3101.0310
| Schurter Electronic Components | Fuse Holder FPG1 STANDARD KNOB IP67 PROTECTION
RoHS : Compliant | | 50
|
503267-1-03N
| Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp | | 47
|
103-3502-05-103
| Dialight | Lamp Holders & Accessories OIL-TIGHT PANEL IND | | 34
|
3-103-981
| Schurter Electronic Components | Power Line Filters FILTER 1PH 2ST U 3A 250VAC/DC
RoHS : Compliant | | 26
|
10361030001
| HARTING Technology Group | Heavy Duty Power Connectors Han-Kit-Ex3A Screw Terminal
RoHS : Compliant | | 7
|
471-031
| Digilent Inc | Test Accessories - Other Analog Discovery Studio with BNC probes | | 4
|
103
| Switchcraft Conxall | Pushbutton Switches LITTEL SWITCH
RoHS : Compliant | | 0
|
61030000103
| HARTING Technology Group | Crimpers / Crimping Tools INDUCOM OUTILLAGE INSERT | | 0
|
3549S-2AA-103/103A
| Bourns Inc | Precision Potentiometers PRECISION POT-7/8" 22MM DIA 10T WW
RoHS : Compliant | | 0
|
B82559A9103A024
| TDK Corporation | Fixed Inductors 10uH 10% 1.85mOhm ERU24 AEC-Q200
RoHS : Compliant | | 0
|
3290P-1-103
| Bourns Inc | Trimmer Resistors - Through Hole 3/8" 10Kohms Sealed Horizontal Adjust 5%
RoHS : Compliant | | 0
|
3-103-693
| Schurter Electronic Components | Power Line Filters FILTER 1PH 2ST W 3A 240VAC CB
RoHS : Compliant | | 0
|
Pasternack Enterprises US | PE1036
| Pasternack Enterprises | Key Specifications. Primary Application Audio/Video/Data Cable Family/Type D-Subminiature Part Type Hoods Connector Series 9-Pin D-Subminiature/HD15. Assembled D-Sub Hood Kit, DB9/HD26 Gray., Pasternack’s PE1036 is an assembled D-sub hood kit that has a two-piece cover design for easy and quick assembly. This hood kit is built for 9-pin D-subminiature/HD26 connectors. Our gray-colored assembled hood kit has a plastic backshell for covering D-sub cable assembly connectors. This D-sub hood kit is suitable for device management, data networks, instrument control, and serial data transmission applications. The PE1036 assembled hood kit from Pasternack is made of plastic with a body length of 1.39 inches. This hood kit has internal cable strain relief, which provides enhanced durability, and is also available in a D-sub 15 position size. All assembly and standard male gender mating hardware are provided. Additional specifications for this D-subminiature hood kit are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of hood kits for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal assembled D-sub hood kit for your requirements. | 1 : $3.28
25 : $3.12
50 : $2.95
100 : $2.82
|
| 6,632
|
PE3C10384
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195-FR, RF Cable Type: TCOM-195-FR, RF Cable Impedance: 50 Ohm. Fire Rated N Male to N Male Low Loss Cable Using TCOM-195-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to N male low loss cable using TCOM-195-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male low loss cable using TCOM-195-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10384 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10384 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. Type N plug to type N plug cable assembly PE3C10384 is built with TCOM-195-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. | | 5,840
|
PE3C10384-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195-FR, RF Cable Type: TCOM-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated N Male to N Male Low Loss Cable 12 Inch Length Using TCOM-195-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to N male low loss cable 12 inch length using TCOM-195-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male low loss cable 12 inch length using TCOM-195-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10384-12 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10384-12 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. Type N plug to type N plug cable assembly PE3C10384-12 is built with TCOM-195-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. | 1 : $117.99
25 : $113.27
50 : $109.73
100 : $107.37
|
| 1,168
|
PE1031
| Pasternack Enterprises | Key Specifications. Primary Application Audio/Video/Data Cable Family/Type D-Subminiature Part Type Dust Cap/Cover Connector Series 15-Pin D-Subminiature/HD26. Assembled D-Sub Hood Kit, DB15/HD26 Black., Pasternack’s PE1031 is an assembled D-sub hood kit that has a two-piece cover design for easy and quick assembly. This hood kit is built for 15-pin D-subminiature/HD26 connectors. Our black-colored assembled hood kit has a plastic backshell for covering D-sub cable assembly connectors. This D-sub hood kit is suitable for device management, data networks, instrument control, and serial data transmission applications. The PE1031 assembled hood kit from Pasternack is made of plastic with a body length of 1.41 inches. This hood kit has internal cable strain relief, which provides enhanced durability, and is also available in a D-sub 9 position size. All assembly and standard male gender mating hardware are provided. Additional specifications for this D-subminiature hood kit are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of hood kits for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal assembled D-sub hood kit for your requirements. | 1 : $2.75
25 : $2.61
50 : $2.48
100 : $2.37
|
| 414
|
PE3C10379-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to SMA Male Low Loss Cable 36 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to SMA male low loss cable 36 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male low loss cable 36 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss a type N to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10379-36 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10379-36 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Type N plug to SMA plug cable assembly PE3C10379-36 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10379-36 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. | 1 : $136.99
25 : $131.51
50 : $127.4
100 : $124.66
|
| 145
|
PE3103LF-36
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 36 inches. BNC Male to BNC Female Bulkhead Cable 36 Inch Length Using 75 Ohm RG59 Coax, RoHS., Radio frequency assembly BNC male to BNC female bulkhead cable 36 inch length using 75 Ohm RG59 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC female bulkhead cable 36 inch length using 75 Ohm RG59 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE3103LF-36, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE3103LF-36 is built with RG59 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3103LF-36 can also be used in the other direction and will be BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC female bulkhead cable 36 inch length using 75 Ohm RG59 coax, RoHS. | 1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9
|
| 95
|
PE3C10354/WP-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 7/16 DIN Male (Plug) to N Male (Plug) Low PIM Cable 24 Inch Length Using TCOM-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 7/16 DIN male (plug) to N male (plug) low PIM cable 24 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM 7/16 DIN to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C10354/WP-24 can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10354/WP-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C10354/WP-24 is built with TCOM-400 which is a flexible coax type. The Pasternack IP68low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10354/WP-24 can also be used in the other direction and will be a type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. | 1 : $228.99
25 : $217.54
50 : $206.09
100 : $196.93
|
| 13
|
PE3CA1035-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-141FLX, RF Cable Type: PE-141FLEX, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Male Cable 12 Inch Length Using PE-141FLX Coax, LF Solder., Radio frequency assembly SMA male to SMA male cable 12 inch length using PE-141FLX coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 12 inch length using PE-141FLX coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3CA1035-12, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3CA1035-12 is built with PE-141FLEX which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 26.5 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 12 inch length using PE-141FLX coax, LF solder. | 1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93
|
| 10
|
PE20DV1036A
| Pasternack Enterprises | Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 698 MHz, Maximum Frequency: 2.7 GHz, Number of Output Ports: 4 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 4 Way N Power Divider from 698 MHz to 2.7 GHz Rated at 30 Watts. PE20DV1036A 4 way type N power divider (also known as a type N coaxial power splitter) is rated for a minimum frequency of 698 MHz and a maximum frequency of 2.7 GHz. This Pasternack 4 port N type power divider / coaxial splitter has a 50 Ohm impedance and a maximum input power of 30 Watts. Our type N coaxial RF splitter / divider has a female type N input and 4 female type N output ports. This 4 way type N RF power divider from Pasternack is a wilkinson design and has a maximum insertion loss of 1.4. The maximum input VSWR of this N type wilkinson splitter / divider is 1.3:1 and the minimum isolation is 20 dB. Our 4 port type N power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This wilkinson 4 way type N female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. | 1 : $567.99
10 : $545.27
25 : $522.55
100 : $499.83
|
| 4
|
PE3C10363-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 24 Inch Length Using TCOM-600 Coax With Times Microwave Components., Radio frequency assembly 7/16 DIN male to 7/16 DIN male low PIM cable 24 inch length using TCOM-600 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male low PIM cable 24 inch length using TCOM-600 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 7/16 DIN to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10363-24 can also be known as a low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10363-24 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C10363-24 is built with TCOM-600 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN low PIM RF cable assembly as per your requirements. | 1 : $340.99
25 : $327.35
50 : $317.12
100 : $310.3
|
| 1
|
PE3C10302
| Pasternack Enterprises | | | 0
|
PE3C10358-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated 4.3-10 Male to 7/16 DIN Male Low PIM Cable 48 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to 7/16 DIN male low PIM cable 48 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to 7/16 DIN male low PIM cable 48 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 4.3-10 to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10358-48 can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10358-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10358-48 is built with TCOM-400-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10358-48 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. | 1 : $226.99
25 : $217.91
50 : $211.1
100 : $206.56
|
| 0
|
PE3C10371-180
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. Fire Rated 4.3-10 Male to 7/16 DIN Male Low PIM Cable 180 Inch Length Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to 7/16 DIN male low PIM cable 180 inch length using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to 7/16 DIN male low PIM cable 180 inch length using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 4.3-10 to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10371-180 can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10371-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10371-180 is built with TCOM-600-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10371-180 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. | 1 : $679.99
25 : $652.79
50 : $632.39
100 : $618.79
|
| 0
|
PE3C11031
| Pasternack Enterprises | | | 0
|
PE3CA1035-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-141FLX, RF Cable Type: PE-141FLEX, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to SMA Male Cable 100 cm Length Using PE-141FLX Coax, LF Solder., Radio frequency assembly SMA male to SMA male cable 100 cm length using PE-141FLX coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 100 cm length using PE-141FLX coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3CA1035-100CM, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3CA1035-100CM is built with PE-141FLEX which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 26.5 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 100 cm length using PE-141FLX coax, LF solder. | 1 : $179.99
25 : $170.99
50 : $161.99
|
| 0
|
Relay Specialties | DGPBP111-03-BL
| BlockMaster Blocks | PCB Terminal Block; 3-position 5.00mm; Plug; Blue | 1 : $0.83
10 : $0.82
25 : $0.81
50 : $0.8
100 : $0.79
|
| 3,811
|
DGWG126V1-03-ON
| BlockMaster Blocks | PCB Term Blk; 3-pos; 5.00mm PCB; Vert; 10A; 300V; 22-14AWG WP LowPro; Black | 1 : $0.99
10 : $0.98
25 : $0.97
50 : $0.95
100 : $0.94
|
| 2,894
|
HP-AT101-1-03P-L1
| BlockMaster Blocks | Power Distribution Block; 50A 300V; Panel; 3-Pole 4 Out; Modular | 1 : $9.03
10 : $8.91
25 : $8.8
50 : $8.68
100 : $8.57
|
| 2,376
|
DGWG10R1-03-BL
| BlockMaster Blocks | PCB Term Blk; 3-pos; 5.00mm PCB; 90°; 10A; 300V; 22-14AWG WP LowPro; Blue | 1 : $1.13
10 : $1.11
25 : $1.1
50 : $1.08
100 : $1.07
|
| 1,958
|
MRRK1A1C103
| Struthers-Dunn | Reed Relay | 1 : $38.04
5 : $35.5
10 : $31.33
15 : $30.43
25 : $30.43
|
| 1,781
|
HI-201-03PH
| BlockMaster Blocks | Term Blk; 3-pos; 0.374"; PCB Pin; Ni; M3.5; Ends; 10A 250VAC; PA66; 4.60mm Pin | 1 : $2.32
10 : $2.25
25 : $2.19
50 : $2.13
100 : $2.07
|
| 635
|
1030H37
| Visual Communications Company | CML INDICATOR | 1 : $6.05
10 : $5.83
25 : $5.64
50 : $5.45
100 : $5.28
|
| 384
|
HD-611-03P
| BlockMaster Blocks | Term Blk; 3-pos; 0.250"; PCB Pin; Ni; M3; NoEnds; 13A 250VAC; PA66; 3.6mm Pin
RoHS : Compliant | 1 : $1.5
10 : $1.46
25 : $1.42
50 : $1.38
100 : $1.34
|
| 255
|
410-30/05
| BlockMaster Blocks | PCB Terminal Block; 5-position 5.00mm; PCB Mount; 90° Entry Black | 1 : $0.59
10 : $0.58
25 : $0.57
50 : $0.56
100 : $0.55
|
| 243
|
ASIDG103-5.0-03P-14
| Automated Systems Interconnet, Inc | 5mm Modular fixed PCB terminal | 1 : $1.56
5 : $1.42
10 : $1.3
25 : $1.2
50 : $1.2
|
| 200
|
MC421-38103
| BlockMaster Blocks | PCB Terminal Block; 3-position 3.81mm; 90° Entry; LockFlange Green | 1 : $3.0
10 : $2.96
25 : $2.93
50 : $2.89
100 : $2.85
|
| 115
|
DT103-03P
| BlockMaster Blocks | PCB Terminal Block; 3-position 5.00mm; PCB Mount; 35°; Green | 1 : $0.63
10 : $0.62
25 : $0.61
50 : $0.6
100 : $0.59
|
| 52
|
1410-3C-240A
| Guardian Electric Manufacturing Company | RELAY | 1 : $70.0
5 : $59.5
10 : $52.89
25 : $47.6
|
| 35
|
675-103/3
| BlockMaster Blocks | Spring TB; 3-pos; 3.81mm; PCB PB; 10A; 300V; 2-Wire Modular PA66; Orange | 1 : $0.57
10 : $0.56
25 : $0.55
50 : $0.54
100 : $0.53
|
| 22
|
9961-0300
| Kanson Electronics Inc | Inductive proximity sensor | | 1
|
TE Connectivity | 1-103653-1
| TE Connectivity | 12 MTE SHRD PIN HSG SR LATCH Number of Positions: 12 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Mating Retention Type: Detent Latching 12 Plug Housing With | TE Connectivity
RoHS : Compliant | 2,500 : $2.86
1,000 : $2.93
500 : $3.01
250 : $3.09
100 : $3.16
50 : $3.24
25 : $3.32
10 : $3.4
1 : $3.47
|
| 6,259
|
1-103957-3
| TE Connectivity | 8X3 MTE RCPT SR LATCH .100CL TE Connectivity
RoHS : Compliant | 10,000 : $1.38
5,000 : $1.41
2,500 : $1.44
1,000 : $1.47
500 : $1.5
250 : $1.54
100 : $1.57
50 : $1.6
25 : $1.63
10 : $1.66
1 : $1.69
|
| 1,880
|
1-103653-4
| TE Connectivity | 15 MTE SHRD PIN HSG SR LATCH Number of Positions: 15 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Mating Retention Type: Detent Latching 15 Plug Housing With | TE Connectivity
RoHS : Compliant | 5,000 : $3.56
2,500 : $3.64
1,000 : $3.73
500 : $3.82
250 : $3.91
100 : $3.99
50 : $4.08
25 : $4.17
10 : $4.25
1 : $4.34
|
| 1,850
|
1-103908-7
| TE Connectivity | 18 MTE HDR SRST LATCH W/HLDWN TE Connectivity
RoHS : Compliant | 2,500 : $7.15
1,000 : $7.34
500 : $7.53
250 : $7.73
100 : $7.92
50 : $8.11
25 : $8.3
10 : $8.5
1 : $8.69
|
| 706
|
1-103639-5
| TE Connectivity | 16 MTE HDR SRST LATCH .100CL TE Connectivity
RoHS : Compliant | 250 : $3.74
100 : $3.89
50 : $4.03
25 : $4.18
10 : $4.33
1 : $4.48
|
| 636
|
1-103169-5
| TE Connectivity | 34 MODII HDR DRST SHRD .100CL TE Connectivity
RoHS : Compliant | 500 : $14.3
250 : $14.8
100 : $15.29
50 : $15.78
25 : $16.28
10 : $16.77
1 : $17.26
|
| 609
|
1-103638-3
| TE Connectivity | 14 MTE HDR SRST LATCH .100CL TE Connectivity
RoHS : Compliant | 2,500 : $3.48
1,000 : $3.58
500 : $3.67
250 : $3.77
100 : $3.86
50 : $3.95
25 : $4.05
10 : $4.14
1 : $4.24
|
| 527
|
1-103735-1
| TE Connectivity | 12 MTE HDR SRST LATCH .100CL TE Connectivity
RoHS : Compliant | 500 : $3.94
250 : $4.08
100 : $4.22
50 : $4.35
25 : $4.49
10 : $4.63
1 : $4.76
|
| 495
|
5103310-3
| TE Connectivity | A/L LOW PRO HDR 16P RA BLACK Connector System: Wire-to-Board Number of Positions: 16 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 16 2.54 mm .1" | Ampseal Header | TE Connectivity
RoHS : Compliant | 1,000 : $2.11
500 : $2.17
250 : $2.23
100 : $2.31
50 : $2.38
1 : $2.61
|
| 325
|
1-103957-4
| TE Connectivity | 5X4 MTE RCPT SR LATCH .100CL TE Connectivity
RoHS : Compliant | 10,000 : $1.71
5,000 : $1.75
2,500 : $1.78
1,000 : $1.82
500 : $1.86
250 : $1.9
100 : $1.94
50 : $1.97
25 : $2.01
10 : $2.05
1 : $2.09
|
| 255
|
1-103308-0
| TE Connectivity | 050 LOPRO HDR SP 15DP TE Connectivity
RoHS : Compliant | 1,000 : $3.35
500 : $3.45
250 : $3.55
100 : $3.67
50 : $3.78
1 : $4.15
|
| 184
|
1-103311-2
| TE Connectivity | 060 LOPRO HDR RA 30DP TE Connectivity
RoHS : Compliant | 1,000 : $5.43
500 : $5.58
250 : $5.76
100 : $5.95
50 : $6.12
1 : $6.72
|
| 182
|
6-103735-9
| TE Connectivity | 20 MTE HDR SRST LATCH .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 20 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 20 | Ampseal Header | TE Connectivity
RoHS : Compliant | 2,500 : $6.03
1,000 : $6.2
500 : $6.36
250 : $6.52
100 : $6.69
50 : $6.85
25 : $7.01
10 : $7.18
1 : $7.34
|
| 180
|
1-1825010-3
| TE Connectivity | ASE4204=4PDT AUTOSLIDE Number of Positions: 4 Product Orientation: Vertical Configuration (Pole-Throw): Four Pole - Double Throw Operating Function: On On Termination Method to PCB: Through Hole - Solder 4 Vertical Four Pole - Double Throw On On | TE Connectivity
RoHS : Compliant | 1,000 : $16.78
500 : $17.29
250 : $17.8
100 : $18.31
50 : $18.81
25 : $19.32
10 : $19.83
1 : $20.34
|
| 89
|
1-103908-0
| TE Connectivity | 11 MTE HDR SRST LATCH W/HLDWN TE Connectivity
RoHS : Compliant | 2,500 : $3.13
1,000 : $3.22
500 : $3.3
250 : $3.39
100 : $3.47
50 : $3.55
25 : $3.64
10 : $3.72
1 : $3.81
|
| 33
|
Teledyne HiRel | M38510/31603BEA
 | Teledyne HiRel | LATCH, 8-BIT ADDRESSABLE
RoHS : Not Compliant | | 0
|
M38510/33501BDA
 | Teledyne HiRel | OR GATE, QUAD 2-INPUT
RoHS : Not Compliant | | 0
|
M38510/34701BSA
 | Teledyne HiRel | IDENTITY COMPARATOR, 8-BIT
RoHS : Not Compliant | | 0
|
5962-87651033A
| Teledyne HiRel | PROM, 1K X 8, WITH 3-STATE OUTPUTS, 30 NS
RoHS : Not Compliant | | 0
|
5962-87515103A
| Teledyne HiRel | PROM, UV ERASABLE, 8K X 8, 55 NS ACCESS TIME
RoHS : Not Compliant | | 0
|
M38510/33301BCA
 | Teledyne HiRel | NOR GATE, QUAD 2-INPUT
RoHS : Not Compliant | | 0
|
M38510/33903BEA
| Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT
RoHS : Not Compliant | | 0
|
M38510/34002BDA
| Teledyne HiRel | AND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant | | 0
|
M38510/34109BFA
 | Teledyne HiRel | FLIP-FLOP, D-TYPE, 4-BIT
RoHS : Not Compliant | | 0
|
M38510/34602B2A
 | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant | | 0
|
M38510/30009BBA
| Teledyne HiRel | NAND GATE, 8-INPUT
RoHS : Not Compliant | | 0
|
M38510/30104B2A
| Teledyne HiRel | FLIP-FLOP, JK, DUAL, WITH PRESET AND CLEAR
RoHS : Not Compliant | | 0
|
M38510/33901BFA
| Teledyne HiRel | DATA SEL/MULTIPLEXER, 8-INPUT
RoHS : Not Compliant | | 0
|
M38510/34106BRA
| Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant | | 0
|
M38510/10103BPA
 | Teledyne HiRel | OP AMP, GENERAL PURPOSE
RoHS : Not Compliant | | 0
|
Portuguese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Polish
Vietnamese
Indian
Mexican
British
New Zealand