 |
Os motores de busca de Datasheet de Componentes eletrônicos |
|
|
Os motores de busca de Datasheet de Componentes eletrônicos |
|
1008F-R68M Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
 Avnet Americas | 505110-0892 | Molex | FFC / FPC Board Connector, 8 Contacts, 1 Row, 0.5mm, Bottom, Gold, SMT, Right Angle, 0.3mm, Solder - Tape and Reel (Alt: 5051100892) RoHS : Compliant |
| 54,000 | |
| MMB02070C1008FB200 | Vishay Intertechnologies | - Tape and Reel (Alt: MMB02070C1008FB200) RoHS : Compliant |
| 48,000 | ||
| MMA02040C1008FB300 | Vishay Intertechnologies | - Tape and Reel (Alt: MMA02040C1008FB300) RoHS : Compliant |
| 6,000 | ||
| AISC-1008-R27G-T | Abracon Corporation | Wirewound Inductor, 270 nH, 910 Milliohm, ? 2%, 600 MHz, 500 mA, 1008 [2520 Metric] - Tape and Reel (Alt: AISC-1008-R27G-T) RoHS : Compliant |
| 4,000 | ||
| MTSW-110-08-G-D-229-RA | Samtec Inc | - Bulk (Alt: MTSW-110-08-G-D-229-RA) RoHS : Compliant |
| 3,944 | ||
| 10082201-104A05LF | Amphenol Corporation | - Tape and Reel (Alt: 10082201-104A05LF) RoHS : Compliant |
| 2,600 | ||
| 39-31-0088 | Molex | - Bulk (Alt: 0039310088) RoHS : Compliant |
| 2,384 | ||
AISC-1008F-1R5G-T | Abracon Corporation | Ind Chip Unshielded Wirewound 1.5uH 2% 7.9MHz 41Q-Factor Ferrite 630mA 1008 T/R - Tape and Reel (Alt: AISC-1008F-1R5G-T) RoHS : Compliant |
| 2,000 | ||
| HW-10-08-G-S-375-SM-LC-TR | Samtec Inc | Conn Board Stacker HDR 10 POS 9.53mm Stack Height 2.54mm Solder ST SMD T/R - Tape and Reel (Alt: HW-10-08-G-S-375-SM-LC-TR) RoHS : Compliant |
| 1,200 | ||
| AC05000001008JAC00 | Vishay Intertechnologies | - Ammo Pack (Alt: AC05000001008JAC00) RoHS : Compliant |
| 1,000 | ||
| 65801-008LF | Amphenol Corporation | - Trays (Alt: 65801-008LF) RoHS : Compliant |
| 137 | ||
| IHDM1008BCEV1R2M3A | Vishay Intertechnologies | Mat track, FG, IHDM-1008BC-3A 1.2?H 20 - Bulk (Alt: 83AH7723) RoHS : Not Compliant |
| 31 | ||
| 801-008-16NF5-3SA | Glenair Inc | - Bulk (Alt: 801-008-16NF5-3SA) RoHS : Not Compliant |
| 6 | ||
| 10-087015-01P | Amphenol Corporation | - Bulk (Alt: 10-087015-01P) RoHS : Not Compliant | 3 | |||
| 801-008-26NF21-130SA | Glenair Inc | - Bulk (Alt: 801-008-26NF21-130SA) RoHS : Not Compliant |
| 2 | ||
 Newark | AWCS0016100815NJ00 | Pulse Electronics Corporation | Wirewound Ind, 15Nh, 0.7A, Unshielded; |Pulse Electronics AWCS0016100815NJ00 RoHS : Compliant |
| 4,000 | |
| 10-08-D-0152-C-4-08-4-T | Global Connector Technology | Cable Assy, Ffc/Fpc, 8Pos, 1Mm, Wht; |Gct 10-08-D-0152-C-4-08-4-T RoHS : Compliant |
| 960 | ||
| MTSW-110-08-G-D-200 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 20Pos; |Samtec, Inc. MTSW-110-08-G-D-200 RoHS : Compliant |
| 888 | ||
| MTSW-110-08-G-S-340 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 10Pos; |Samtec, Inc. MTSW-110-08-G-S-340 RoHS : Compliant |
| 888 | ||
| MTSW-110-08-T-D-340 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 20Pos; |Samtec, Inc. MTSW-110-08-T-D-340 RoHS : Compliant |
| 888 | ||
| MP-FFCA10080503B | SPC Multicomp | Ffc Cord, 8P, Opposite Side, 50Mm, Wht; |Multicomp Pro MP-FFCA10080503B RoHS : Compliant |
| 495 | ||
| MTLW-110-08-T-S-335 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 10Pos; |Samtec, Inc. MTLW-110-08-T-S-335 RoHS : Compliant |
| 438 | ||
| MTLW-110-08-T-S-380 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 10Pos; |Samtec, Inc. MTLW-110-08-T-S-380 RoHS : Compliant |
| 438 | ||
| 10-08-1031 | Molex | Wire-To-Board Connector, Kk 3003 Series,; |Molex 10-08-1031 (Alternate Part Number: 800753612167 RoHS : Compliant |
| 436 | ||
| MTMM-110-08-L-D-250 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 20Pos; |Samtec, Inc. MTMM-110-08-L-D-250 RoHS : Compliant |
| 435 | ||
| MTSW-110-08-G-D-215-RA | Samtec Inc | Pin Header, Mtsw-110-08-G-D-215-Ra; |Samtec, Inc. MTSW-110-08-G-D-215-RA RoHS : Compliant |
| 286 | ||
| MTSW-110-08-T-D-195-RA | Samtec Inc | Pin Header, Mtsw-110-08-T-D-195-Ra; |Samtec, Inc. MTSW-110-08-T-D-195-RA RoHS : Compliant |
| 257 | ||
| RC21008_31008-PROG | Renesas Electronics Corporation | Clock Generator, 8 O/P, 20Mhz, Lga-40; |Renesas Electronics Corporation RC21008_31008-PROG RoHS : Compliant |
| 3 | ||
| 1008 | Keystone Electronics Corp | Terminal, Male Disconnect, 0.25In; |Keystone 1008 RoHS : Compliant |
| 0 | ||
| 1008 | Adafruit Industries | Test Connector Type A:Alligator Clip; Test Connector Type B:Alligator Clip; Voltage Rating:-; Current Rating:-; Insulator Colour:-; Lead Length - Metric:-; Lead Length - Imperial:-; No. Of Test Leads:12; Product Range:- Rohs Compliant: Yes |Adafruit 1008 RoHS : Compliant |
| 0 | ||
 Analog Devices Inc | LT1008S8#PBF | Analog Devices Inc | pA In C, uV Offset, L N Op Amp RoHS : Compliant |
| 1,931 | |
| LT1008IN8#PBF | Analog Devices Inc | pA In C, uV Offset, L N Op Amp RoHS : Compliant |
| 1,900 | ||
| MAX11008BETM+ | Analog Devices Inc | Dual RF LDMOS Bias Controller RoHS : Compliant |
| 1,100 | ||
| LT1008CN8#PBF | Analog Devices Inc | pA In C, uV Offset, L N Op Amp RoHS : Compliant |
| 243 | ||
| LT1008S8#TRPBF | Analog Devices Inc | pA In C, uV Offset, L N Op Amp RoHS : Compliant |
| 0 | ||
| MAX11008BETM+T | Analog Devices Inc | Dual RF LDMOS Bias Controller RoHS : Compliant |
| 0 | ||
 NXP Semiconductors | TEA2016DK1008 | NXP Semiconductors | TEA2016AAT/2 Development Programming Board and Samples, RoHS : Not Compliant |
| 11 | |
 RS | 1008 | Keystone Electronics Corp | TERMINAL STRIP QUICK-FIT 5 PAIR MALE VERTICAL RIVET MOUNT TAB SIZE .250 RoHS : Compliant |
| 910 | |
| 100829NP (10.0829NPT) | Lapp Group | RECTANGULAR POWER HOOD THERMOPLASTIC RESIN 3/4 IN. NPT, EPIC SERIES |
| 132 | ||
| 1008 | RACO | LOCKNUTS, STEEL, ZINC ELECTRO PLATED, SIZE 2 IN, FOR CONDUIT TO A BOX/ENCLOSURE |
| 60 | ||
| 0810 0805 03 300 1M (0810 0805 ... 3...) | Lutronic Holdings | CABLEEND1, M8, MALE, STRAIGHT, A-CODED, CABLEEND2, M8, FEMALE, ANGLED, A-CODED |
| 10 | ||
| 0810 0800 04 301 5M (0810 0800 ... 3...) | Lutronic Holdings | CABLEEND1, M8, MALE, STRAIGHT, A-CODED, CABLEEND2, M8, FEMALE |
| 10 | ||
| 0810 0805 04 301 1,5M (0810 0805 ... 3...) | Lutronic Holdings | CABLEEND1, M8, MALE, STRAIGHT, A-CODED, CABLEEND2, M8, FEMALE, ANGLED, A-CODED |
| 10 | ||
| 0810 0800 03 300 1,5M (0810 0800 ... 3...) | Lutronic Holdings | CABLEEND1, M8, MALE, STRAIGHT, A-CODED, CABLEEND2, M8, FEMALE, STRAIGHT, A-CODED |
| 10 | ||
| 0810 0800 03 001 0,6M (0810 0800 ... 0...) | Lutronic Holdings | CABLEEND1, M8, MALE, STRAIGHT, A-CODED, CABLEEND2, M8, FEMALE, STRAIGHT, A-CODED |
| 8 | ||
| 0810 0805 04 301 2M (0810 0805 ... 3...) | Lutronic Holdings | CABLEEND1, M8, MALE, STRAIGHT, A-CODED, CABLEEND2, M8, FEMALE, ANGLED, A-CODED |
| 7 | ||
| 0810 0800 04 301 1,5M (0810 0800 ... 3...) | Lutronic Holdings | CABLEEND1, M8, MALE, STRAIGHT, A-CODED, CABLEEND2, M8, FEMAL |
| 7 | ||
| 011010088 (01101008) | Phoenix Mecano | BOX METAL, ALUMINUM UNPAINTED COVER INCLUDED 3.937 L X 3.937 W X 3.189 |
| 6 | ||
| 0810 0800 03 300 1M (0810 0800 ... 3...) | Lutronic Holdings | CABLEEND1, M8, MALE, STRAIGHT, A-CODED, CABLEEND2, M8, FEMALE, STRAIGHT, A-CODED |
| 5 | ||
| 0810 0800 03 300 0,3M (0810 0800 ... 3...) | Lutronic Holdings | CABLEEND1, M8, MALE, STRAIGHT, A-CODED, CABLEEND2, M8, FEMALE, STRAIGHT, A-CODED |
| 4 | ||
| 0810 0800 03 001 1,5M (0810 0800 ... 0...) | Lutronic Holdings | CABLEEND1, M8, MALE, STRAIGHT, A-CODED, CABLEEND2, M8, FEMALE, STRAIGHT, A-CODED |
| 2 | ||
| 1008 | Adafruit Industries | SMALL ALLIGATOR CLIP TEST LEAD (SET OF 12) |
| 0 | ||
 Microchip Technology Inc | DSC1101AI1-008.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 8MHz, 50PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-05-10 RoHS : Compliant |
| 2,555 | |
| DSC1101AI1-008.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 8MHz, 50PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-05-10 RoHS : Compliant |
| 2,555 | ||
| DSC1121BI1-008.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 8MHz, 50PPM, 2.5-3.3V, -40 to 85C, 5.0x3.2mm, VDFN, Projected EOL: 2045-12-14 RoHS : Compliant |
| 1,256 | ||
| DSC1121BI1-008.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 8MHz, 50PPM, 2.5-3.3V, -40 to 85C, 5.0x3.2mm, VDFN, Projected EOL: 2045-12-14 RoHS : Compliant |
| 1,256 | ||
| APT10086BVRG | Microchip Technology Inc | MOSFET MOS 5 1000 V 860 mOhm TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 655 | ||
| APT10086BVFRG | Microchip Technology Inc | FREDFET MOS 5 1000 V 860 mOhm TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 431 | ||
| DSC1121BM1-008.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 8MHz, 50PPM, 2.5-3.3V, -55 to 125C, 5.0x3.2mm, VDFN, Projected EOL: 2041-09-24 RoHS : Compliant |
| 364 | ||
| DSC1121BM1-008.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 8MHz, 50PPM, 2.5-3.3V, -55 to 125C, 5.0x3.2mm, VDFN, Projected EOL: 2046-02-06 RoHS : Compliant |
| 364 | ||
| 090-11008-000 | Microchip Technology Inc | IGM-1100 FOR EXTERNAL ANTENNA, Projected EOL: 2051-01-13 RoHS : Compliant |
| 80 | ||
DSC1101CM1-008.0000-3.20-mm-x-2.50-mm.jpg) | Microchip Technology Inc | MEMS OSC, LVCMOS, 8MHz, 50PPM, 2.5-3.3V, -55 to 125C, 3.2 x 2.5mm, VDFN, Projected EOL: 2040-11-12 RoHS : Compliant |
| 32 | ||
| DSC1101CM1-008.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 8MHz, 50PPM, 2.5-3.3V, -55 to 125C, 3.2 x 2.5mm, VDFN, Projected EOL: 2051-04-12 RoHS : Compliant |
| 32 | ||
| PCI1008T-I/5CW | Microchip Technology Inc | 7-port PCIe Gen3 DSP, Gen4 USP x16 Fanout Switch, FCCSP, Projected EOL: 2051-06-17 RoHS : Compliant |
| 0 | ||
| C4500C1-0081-N-12M8 | Microchip Technology Inc | C4500C1-0081-N-12M8, Projected EOL: 2051-02-13 - Contact for Pricing | 0 | |||
DSC1001BI1-008.0000-5.00-mm-x-3.20-mm.jpg) | Microchip Technology Inc | MEMS OSC, LVCMOS, 8MHz, 50PPM, 1.8-3.3V, -40 to 85C, 5.0x3.2mm, VDFN, Projected EOL: 2041-10-14 RoHS : Compliant |
| 0 | ||
| DSC1001AI1-008.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 8MHz, 50PPM, 1.8-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-04-05 RoHS : Compliant |
| 0 | ||
 Rochester Electronics | MMRF1008HR5 | NXP Semiconductors | MMRF1008 - Pulse Lateral N-Channel RF Power MOSFET, 960-1215 MHz, 275 W, 50 V RoHS : Compliant |
| 50 | |
| ICE3AR10080JZTXKLA1 | Infineon Technologies AG | Switching Controller RoHS : Compliant |
| 500 | ||
ICE3AR10080JZXKLA1 | Infineon Technologies AG | Off-Line Converter and Switch Flyback 7-DIP Tube RoHS : Compliant |
| 17,088 | ||
PM1008GJ | Analog Devices Inc | Low Power , PRECISIN EXTERNALLY-COMPENSATED Operational Amplifier RoHS : Not Compliant |
| 1,268 | ||
PM1008GP | Analog Devices Inc | Operational Amplifier, 1 Func, 250uV Offset-Max, BIPolar, PDIP8 RoHS : Not Compliant |
| 10,205 | ||
| 74AC11008NSR | Texas Instruments | AND Gate 4-Element 2-IN CMOS 16-Pin SOP T/R RoHS : Compliant |
| 6,000 | ||
| SN74ALS1008DR | Texas Instruments | NAND Gate, ALS Series, 3-Func, 3-Input, TTL RoHS : Not Compliant |
| 5,000 | ||
THS10082CDA | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Compliant |
| 12,650 | ||
| SMJ5C1008L-25JDCM | Texas Instruments | Dual marked (5962-895982DMZA) RoHS : Not Compliant |
| 3 | ||
| AVR-1F100808SR40LT | Abracon Corporation | IND FIXED Molded Ferrite 400nH 70A 120u OHM ±15% RoHS : Compliant |
| 600 | ||
| S40410081B1B2I000 | Cypress Semiconductor | Flash, 8GX8, PBGA100 RoHS : Compliant |
| 7 | ||
KSC1008YBU | Fairchild Semiconductor Corporation | Trans BJTs Single 60V 700mA TO-226-3 Bag RoHS : Compliant |
| 390,621 | ||
| ADC10080CIMT | National Semiconductor Corporation | ADC, Proprietary Method, 10-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, PDSO28 RoHS : Not Compliant |
| 5 | ||
| M5M51008DVP-70HIBT | Renesas Electronics Corporation | Standard SRAM, 128KX8 RoHS : Compliant |
| 4,620 | ||
| SI5397A-A10084-GM | Skyworks Solutions Inc | Clock Generator RoHS : Compliant |
| 8 | ||
 Sager | MTSW-110-08-G-D-200 | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 888 | |
| MTLW-110-08-T-S-335 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 438 | ||
| MTLW-110-08-T-S-380 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 438 | ||
| MTMM-110-08-L-D-250 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 435 | ||
| MTSW-110-08-G-D-215-RA | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 286 | ||
| 1008 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 1008 | Keystone Electronics Corp | Terminals TERMINAL .250 RoHS : Compliant |
| 0 | ||
| MTLW-110-08-G-S-400 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTLW-110-08-L-D-000 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTLW-110-08-L-D-370 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-110-08-F-D-315 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-110-08-F-S-305 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-110-08-G-D-008-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-110-08-G-D-075 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-110-08-G-D-318 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
 Coilcraft Direct | 1008LS-682XJRC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 38,410 | |
| 1008CS-330XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 28,308 | ||
| 1008CS-132XGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 5,650 | ||
| 1008AF-152XKRC | Coilcraft Inc | RF inductor, ferrite core, 5/10% tol, SMT, RoHS Halogen Free R RoHS : Compliant |
| 3,012 | ||
| 1008LS-563XJLC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS RoHS : Compliant |
| 1,954 | ||
| 1008LS-332XJRC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 1,546 | ||
| 1008CS-822XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 1,526 | ||
| 1008CS-271XFEC | Coilcraft Inc | RF inductor, ceramic core, 1% tol, SMT, RoHS Halogen Free RoHS : Compliant | 1,105 | |||
| 1008HT-R24TGLC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 962 | ||
| 1008CS-392XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 390 | ||
| 1008AF-152XJLC | Coilcraft Inc | RF inductor, ferrite core, 5/10% tol, SMT, RoHS Halogen Free RoHS : Compliant | 0 | |||
| 1008CS-162XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 0 | ||
| 1008CS-162XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1008CS-200XGLC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1008AF-472XJLC | Coilcraft Inc | RF inductor, ferrite core, 5/10% tol, SMT, RoHS Halogen Free RoHS : Compliant | 0 | |||
 TME | 19141-0083 | Molex | Tip: ring; M4; crimped; non-insulated; tinned; copper; 12AWG÷10AWG RoHS : Compliant |
| 84,000 | |
| RLB1008-270M3 | Bourns Inc | RLB1008-270M3 |
| 15,300 | ||
| 2158100-8 | TE Connectivity | Relay: electromagnetic; Ucoil: 6VDC; SPDT; max.250VAC; monostable RoHS : Compliant |
| 8,080 | ||
| AISC-1008-R33J-T | Abracon Corporation | Inductor: wire; SMD; 1008; 330nH; ±5%; 2.92x2.79x2.29mm; ceramics RoHS : Compliant |
| 6,000 | ||
| AISC-1008-1R5J-T | Abracon Corporation | Inductor: wire; SMD; 1008; 1.5uH; ±5%; ceramics; Dim: 2.92x2.79mm RoHS : Compliant |
| 4,000 | ||
| 1-1008-2-6,7X19 | Kraftberg | Washer; round; h=2.8mm; D=19mm; A2 stainless steel; EPDM |
| 1,000 | ||
| 1008 | Keystone Electronics Corp | Terminal: flat; 6.4mm; 0.8mm; male; M3; 10x terminal,double; screw RoHS : Compliant |
| 435 | ||
| 10-08-D-0152-C-4-08-4-T | Global Connector Technology | FFC tape; tinned; 1A; 60V; FFC10-TIN; Tape ph: 1mm; Cores: 8; L: 152mm |
| 342 | ||
| 10-08-1031 | Molex | Connector: wire-board; socket; male; data; KK; PIN: 3; 5.08mm; tinned RoHS : Compliant |
| 299 | ||
| 27010080 | Phoenix Mecano | Battery contact kit |
| 20 | ||
| 087-1-008-0-F-XS0-1110 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 8; THT; straight RoHS : Compliant |
| 0 | ||
| 088-1-008-0-F-XS0-1890 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 8; THT; angled; 1x8 RoHS : Compliant |
| 0 | ||
| 089-1-008-0-F-XS0-1770 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 8; THT; straight RoHS : Compliant |
| 0 | ||
| 089-1-008-0-S-XS0-2280 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 8; THT; straight RoHS : Compliant |
| 0 | ||
| 15381008 | Lapp Group | Wire; ÖLFLEX® TRAIN 381; 1x70mm2; stranded; Cu,tinned; black |
| 0 | ||
 Ameya Holding Limited | DSC1001DL1-008.0000T-2.50-mm-x-2.00-mm.jpg) | Microchip Technology Inc | RoHS : Compliant | 15,482 | ||
| RC21008B000GND#BB0 | Renesas Electronics Corporation | 3,920 | ||||
| OR-1008-TP | Orient Motor Co | 3,000 | ||||
TPS6281008QWRWYRQ1 | Texas Instruments | RoHS : Compliant | 2,761 | |||
| RC21008B101GND#KB0 | Renesas Electronics Corporation | 2,585 | ||||
| RC21008B17TGND#KB0 | Renesas Electronics Corporation | 1,259 | ||||
| HTSW-110-08-T-S-LA | Samtec Inc | RoHS : Compliant | 1,250 | |||
| LFCPNX-100-8CBE256AHWL | Lattice Semiconductor Corporation | 713 | ||||
| RC31008B156GND#KB0 | Renesas Electronics Corporation | 460 | ||||
| SEAR-40-30.0-10-085 | Samtec Inc | RoHS : Compliant | 240 | |||
| QPA1008SR | Qorvo | RoHS : Compliant | 58 | |||
 ComSIT USA | 23100889901A | AVC AmericaInc | AVAILABLE EU | 1,151 | ||
| 1008LS103XJL | Coilcraft Inc | AVAILABLE EU | 958 | |||
| KSC1008YBU | FAIRCHILD SEMICONDUCTOR/ON SEMICONDUCTOR/ONSEMI | AVAILABLE EU | 6,108 | |||
| 7448011008 | AVAILABLE EU | 151 | ||||
| RC21008BQ8BGL2BD0 | Renesas Electronics Corporation | AVAILABLE EU | 364 | |||
| F51L1A7H111008 | Amphenol FCi | AVAILABLE EU | 4,838 | |||
| 39310088 | MOLEX INC | AVAILABLE EU | 583 | |||
| PZ1008 | AVAILABLE EU | 653 | ||||
| 23100882001A | AVC AmericaInc | AVAILABLE EU | 1,283 | |||
| LFCPNX1008BBG484I | AVAILABLE EU | 25,038 | ||||
ComSIT USA | 09810080NSXYR1 | MPE-Garry GmbH | Electronic Component RoHS : Compliant | 11,050 | ||
| M5M51008CFP70H | mit | 1048576-BIT(131072-WORD BY 8-BIT)CMOS STATIC RAM Standard SRAM, 128KX8, 70ns, CMOS, PDSO32 RoHS : Not Compliant | 2,029 | |||
| SMM02070C1008FBP00 | Vishay Intertechnologies | THIN FILM MELF RESISTOR Fixed Resistor, Metal Film, 0.4W, 1ohm, 350V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 2309 RoHS : Compliant | 1,295 | |||
| M5M51008CFP70HITA0A | Mitsubishi Electric | Electronic Component RoHS : Not Compliant | 1,000 | |||
| MT5C1008DJ20 | Microsemi Corporation (now Microchip) | 128K X 8 SRAM WITH OUTPUT ENABLE Standard SRAM, 128KX8, 20ns, CMOS, PDSO32 RoHS : Not Compliant | 853 | |||
| 1008CS182XJLC | Coilcraft Inc | IND FIXED Wirewound Ceramic 1.8uH 300mA 2.6 OHM (Max) �5% 1008 T/R RoHS : Not Compliant | 680 | |||
| TLSU1008AT04 | Toshiba America Electronic Components | Single Color LED, Red, 1.1mm RoHS : Compliant | 485 | |||
| K6X1008C2DTF55 | Samsung Semiconductor | 128K X 8 BIT LOW POWER FULL CMOS STATIC RAM Standard SRAM, 128KX8, 55ns, CMOS, PDSO32 RoHS : Not Compliant | 320 | |||
| 80871008 | WECO Electrical Connectors | 950-FB 8 Screw Connector for PCB SIL8 RoHS : Compliant | 300 | |||
| M5M51008FP10L | Mitsubishi Electric | 128K X 8 STANDARD SRAM Standard SRAM, 128KX8, 100ns, CMOS, PDSO32 RoHS : Not Compliant | 248 | |||
| M5M51008DRV55HI | Renesas Electronics Corporation | 1048576-BIT(131072-WORD BY 8-BIT)CMOS STATIC RAM Standard SRAM, 128KX8, 55ns, CMOS, PDSO32 RoHS : Compliant | 180 | |||
| M5M51008DRV55HIBT | Renesas Electronics Corporation | 1048576-BIT(131072-WORD BY 8-BIT)CMOS STATIC RAM Standard SRAM, 128KX8, 55ns, CMOS, PDSO32 RoHS : Compliant | 96 | |||
| CXG1008N | Sony Batteries | HIGH ISOLATION SPDT SWITCH SPDT, 900MHz Min, 2000MHz Max, 1 Func, 1.3dB Insertion Loss-Max, GAAS RoHS : Not Compliant | 50 | |||
| JM3851008003BDA | National Semiconductor Corporation | QUADRUPLE 2-INPUT POSITIVE-AND GATE AND Gate, S Series, 4-Func, 2-Input, TTL, CDFP14 RoHS : Not Compliant | 19 | |||
| M5M51008DVP55HIBT | Renesas Electronics Corporation | 1048576-BIT(131072-WORD BY 8-BIT)CMOS STATIC RAM Standard SRAM, 128KX8, 55ns, CMOS, PDSO32 RoHS : Compliant | 2 | |||
 GLYN GmbH & Co. KG | ETEMB101008ADRAM*C0 | Emerging Display Technolgies | 10.1" WSVGA, 850cd, IPS, 32H750, PoE, C/L | 9 | ||
| ETEMN101008XDRAM*C0 | Emerging Display Technolgies | 10.1" WSVGA, 850cd, IPS, 32H750, PoE | 4 | |||
| ETEMB101008XDRAM*C0 | Emerging Display Technolgies | 10.1" WSVGA, 850cd, IPS, 32H750, PoE, C/L, MAC EE | 4 | |||
| ETEMN101008ADRAM*C0 | Emerging Display Technolgies | 10.1" WSVGA, 850cd, IPS, 32H750, PoE | 3 | |||
| UPN-EDGE-ASLHN97-A10-0864 | AAEON Technology Inc | UP Squared Pro 710H Edge inkl. Hailo Card | 1 | |||
 Interstate Connecting Components | 1008 | Keystone Electronics Corp | 90 DEGREE RIVET TYPE QUICK FIT TERMINAL RoHS : Compliant |
| 137 | |
| 380DS004B1008M6 | Glenair Inc | EMI/RFI NON-ENVIRO BS STRAIGHT W STRAIN RELIEF | 4 | |||
| 095-725-131-008 | Amphenol RF | SMPM RIGHT ANGLE PLUG TO SMPM | 0 | |||
| 2CMA100885R1000 | Amphenol Sine Systems | PLV232-10 EXTRA LOW VOLTAGE PL | 0 | |||
| 2M801-008-16NF9-19PA | Amphenol Aerospace | 0 | ||||
| 2M801-008-26M16-55SB | Amphenol Aerospace | 0 | ||||
| 2M801-008-26M8-2SA | Amphenol Aerospace | 2M801 STR PLG SKT 'A' ENP |
| 0 | ||
| 2M801-008-26M9-4PA | Amphenol Aerospace | 0 | ||||
| 2M801-008-26NF13-220PA | Amphenol Aerospace | DUAL-START ACME THREADS | 0 | |||
| 2M801-008-26ZNU9-19PA | Amphenol Aerospace | 0 | ||||
| 380MS141NF1008-12 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 440AD069M1008 | Glenair Inc | RoHS : Compliant | 0 | |||
| 20010085-30 | TE Connectivity | PRESS XDCR M323N-01000B-500BG | 0 | |||
| 164C10089X | Conec Corporation | D-SUB 25P | 0 | |||
| 10082201-404-04LF | Amphenol FCi | BERGSTIK HDR SR RA PIP-1008220 RoHS : Compliant | 0 | |||
 NexGen Digital | 1008CT-080XKBC | Coilcraft Inc | RoHS : Compliant | 16,127 | ||
| 1008PS-222KLC | Coilcraft Inc | RoHS : Compliant | 3,720 | |||
| 1008CS-560XKBC | Coilcraft Inc | RoHS : Not Compliant | 3,288 | |||
| 1008CS-472XGLC | Coilcraft Inc | RoHS : Compliant | 2,000 | |||
| 1008HQ-22NXGLC | Coilcraft Inc | RoHS : Compliant | 1,960 | |||
| 1008LS-122XKBC | Coilcraft Inc | RoHS : Compliant | 635 | |||
| 1008CS-101XJBC | Coilcraft Inc | RoHS : Not Compliant | 580 | |||
| 1008HQ-R10XGLC | Coilcraft Inc | RoHS : Compliant | 465 | |||
| 1008CS-471XJLC | Coilcraft Inc | RoHS : Compliant | 296 | |||
| 1008CS-101XJLB | Coilcraft Inc | RoHS : Compliant | 186 | |||
| 1008CT-040XKBC | Coilcraft Inc | RoHS : Compliant | 182 | |||
| 1008HQ-4N1XJLB | Coilcraft Inc | RoHS : Compliant | 140 | |||
| GS61008P-E05-MR | GaN Systems | 127 | ||||
| GS61008P-MR | GaN Systems | RoHS : Compliant | 125 | |||
| K6T1008C2E-TB55 | Samsung Electro-Mechanics | 17 | ||||
 PEI Genesis | 03A1008S1008C6 | SOURIAU-SUNBANK |
| 0 | ||
| 09A1008S20P | SOURIAU-SUNBANK |
| 0 | |||
| 09L1008S14P | SOURIAU-SUNBANK |
| 0 | |||
| 10-265910-082 | Amphenol Corporation |
| 0 | |||
| 97-3057-1008-608 | Amphenol Corporation |
| 0 | |||
| 06A1008S18N | SOURIAU-SUNBANK |
| 0 | |||
| 06A1008S28C | SOURIAU-SUNBANK |
| 0 | |||
| 03A1009A1008N | SOURIAU-SUNBANK |
| 0 | |||
| 06A1008R16N | SOURIAU-SUNBANK |
| 0 | |||
| 06F2001S1008CN5 | SOURIAU-SUNBANK |
| 0 | |||
| 10084216-2 | SOURIAU-SUNBANK |
| 0 | |||
| SE16A1008E2.0R4 | SOURIAU-SUNBANK |
| 0 | |||
| SE16CR1008A3.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE30CR1008FRS2.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| SE6U1008A2.5-34 | SOURIAU-SUNBANK |
| 0 | |||
 PUI | KBU1008-G | 1,600 | ||||
| KBPC1008-G | 150 | |||||
| 12.71008 | 81 | |||||
 Chip 1 Exchange | 19141-0083 | Molex | INSTOCK RoHS : Compliant | 113,883 | ||
| 2158100-8 | TE Connectivity | INSTOCK RoHS : Compliant | 16,796 | |||
| 10082280 | INSTOCK | 16,000 | ||||
| C-210-080 | ITT Interconnect Solutions | INSTOCK | 12,975 | |||
| ISLT1008V | Isocom Components | INSTOCK RoHS : Compliant | 6,000 | |||
| 10082280 | Jauch Quartz America | INSTOCK | 6,000 | |||
| FKP1 10083722 | Wima | INSTOCK | 3,659 | |||
| HSC1008R0F | TE Connectivity | INSTOCK RoHS : Compliant | 3,081 | |||
| 1008CS-270XKBC | Coilcraft Inc | INSTOCK | 2,491 | |||
| 1008LS-472XKBC | INSTOCK | 2,000 | ||||
| KBU1008-G | Comchip Technology Corporation Ltd | INSTOCK RoHS : Compliant | 1,600 | |||
| 1008HS-18IT JBC | INSTOCK | 1,600 | ||||
| 1008CS-152XKBC | INSTOCK | 571 | ||||
| 1008CS101XKBC | Coilcraft Inc | INSTOCK | 354 | |||
| RC55D 10081722 | TT Electronics Welwyn Components | INSTOCK | 227 | |||
 Avnet Abacus | MMA02040C1008FB300 | Vishay Intertechnologies | Surface Mount MELF Resistor 1 ohm MMA Series 200 V Metal Film 250 mW 1 - Tape and Reel (Alt: MMA02040C1008FB300) RoHS : Compliant | 165,000 | ||
| MMB02070C1008FB200 | Vishay Intertechnologies | - Tape and Reel (Alt: MMB02070C1008FB200) RoHS : Compliant | 142,000 | |||
| SMM02040C1008FB000 | Vishay Intertechnologies | - Tape and Reel (Alt: SMM02040C1008FB000) RoHS : Compliant | 110,000 | |||
| MMU01020C1008GB300 | Vishay Intertechnologies | - Tape and Reel (Alt: MMU01020C1008GB300) RoHS : Compliant | 63,000 | |||
| SMM02040C1008FB300 | Vishay Intertechnologies | Surface Mount MELF Resistor Mini MELF 1 ohm SMM Series 200 V Thin Film 250 mW 1 - Tape and Reel (Alt: SMM02040C1008FB300) RoHS : Compliant | 57,000 | |||
| PR03000201008JAC00 | Vishay Intertechnologies | - Tape and Reel (Alt: PR03000201008JAC00) RoHS : Compliant | 16,500 | |||
| 347910081 | Molex | Automotive Connector Housing Mini50 34791 Series Receptacle 8 Ways (Alt: 347910081) RoHS : Compliant | 12,000 | |||
| MRS25000C1008FCT00 | Vishay Intertechnologies | MRS2550 1 CT 1R0 - Tape and Reel (Alt: MRS25000C1008FCT00) RoHS : Compliant | 10,000 | |||
| 10085031 | Molex | (Alt: 10085031) RoHS : Compliant | 1,700 | |||
| B65821C1008T1 | TDK Corporation | B65821C Coil Former 8Pin (Alt: B65821C1008T001) RoHS : Compliant | 1,000 | |||
| PX0410/08P/6065 | Bulgin | 8 Power Position Circular Connector Plug Housing Free Hanging InLine Backshell Coupling Nut (Alt: PX0410/08P/6065) RoHS : Compliant | 700 | |||
| 733910083 | Molex | RF Coaxial Connector SMA Coaxial Right Angle Jack Through Hole Right Angle 50 ohm (Alt: 733910083) RoHS : Compliant | 160 | |||
| 1SET411008R0000 | TE Connectivity | (Alt: 1SET411008R0000) RoHS : Compliant | 100 | |||
| TW-10-08-G-D-480-175 | Samtec Inc | Stacking Board Connector TW Series 20 Contacts Header 2 mm Through Hole 2 Rows (Alt: TW-10-08-G-D-480-175) RoHS : Compliant | 76 | |||
| 1008 | Murata Manufacturing Co Ltd | EOLLTBdmy251103LTS050104 NO REP RoHS : Not Compliant | 0 | |||
Avnet Asia | BWCU00121008900M02 | Pulse Electronics Corporation | (Alt: BWCU00121008900M02) RoHS : Compliant |
| 12,000 | |
| FODM1008R2 | onsemi | (Alt: FODM1008R2) RoHS : Compliant | 3,000 | |||
| FP1008R6-R100-R | Eaton Corporation | (Alt: FP1008R6-R100-R) RoHS : Compliant |
| 2,500 | ||
| 10084423-101LF | Amphenol Corporation | (Alt: 10084423-101LF) RoHS : Compliant |
| 2,400 | ||
| FP1008-150-R | Eaton Corporation | Power Inductor (SMD), 150 nH, ? 10%, 63 A, Unshielded, 82 A, 10.8mm x 8mm x 8mm (Alt: FP1008-150-R) RoHS : Compliant |
| 1,750 | ||
| FP1008V2-R100-NQ | Eaton Corporation | (Alt: FP1008V2-R100-NQ) RoHS : Compliant |
| 1,200 | ||
| FP1008R6-R120-R | Eaton Corporation | (Alt: FP1008R6-R120-R) RoHS : Compliant |
| 1,000 | ||
| FP1008V2-R120-NQ | Eaton Corporation | (Alt: FP1008V2-R120-NQ) RoHS : Compliant |
| 600 | ||
| FP1008V1-R080-R | Eaton Corporation | INDUCTOR 80NH (Alt: FP1008V1-R080-R) RoHS : Compliant |
| 550 | ||
| ME1008410116011 | Amphenol Corporation | (Alt: ME1008410116011) RoHS : Compliant | 400 | |||
| 10088418-002LF | Amphenol Corporation | (Alt: 10088418-002LF) RoHS : Compliant |
| 270 | ||
| ME1008410101011 | Amphenol Corporation | Card Edge Connector, Dual Side, 1.57 mm, 84 Contacts, Surface Mount, Straight, Solder (Alt: ME1008410101011) RoHS : Compliant |
| 50 | ||
| AISC-1008-2R7G-T | Abracon Corporation | Wirewound Inductor, 2.7 uH, ? 2%, 290 mA, 1008 [2520 Metric] (Alt: AISC-1008-2R7G-T) RoHS : Compliant | 0 | |||
| BWCU00121008900Y03 | Pulse Electronics Corporation | (Alt: BWCU00121008900Y03) RoHS : Compliant | 0 | |||
| ZPF000000000100828 | TE Connectivity | (Alt: ZPF000000000100828) RoHS : Compliant | 0 | |||
 Avnet Silica | RS1008FL_R1_00001 | PanJit Semiconductor | (Alt: RS1008FL_R1_00001) RoHS : Compliant | 93,000 | ||
ZXCT1008FTA | Diodes Incorporated | Current Sensor SOT23 3 Pins (Alt: ZXCT1008FTA) RoHS : Compliant | 3,000 | |||
AS6C1008-55PCN | Alliance Memory Inc | SRAM Chip Async Single 3V 1MBit 128K x 8 55ns 32Pin PDIP (Alt: AS6C1008-55PCN) RoHS : Compliant | 2,080 | |||
| R5F1008CALA#U0 | Renesas Electronics Corporation | (Alt: R5F1008CALA#U0) RoHS : Compliant | 490 | |||
| KSC1008YBU | onsemi | NPN Epitaxial Silicon Transistor ONSSPCTRNSTVU6M5P (Alt: KSC1008YBU) RoHS : Compliant | 0 | |||
| 10080R-10-133 | Renesas Electronics Corporation | IZOT CPM 4200 WIFI EVALUATION KIT GLOBAL EDITION (Alt: 10080R-10-133) RoHS : Compliant | 0 | |||
| DMP1008UCB9-7 | Diodes Incorporated | (Alt: DMP1008UCB9-7) RoHS : Compliant | 0 | |||
| R5F1008CGLA#U0 | Renesas Electronics Corporation | (Alt: R5F1008CGLA#U0) RoHS : Compliant | 0 | |||
| PCI1008T-I/5CW | Microchip Technology Inc | 7port PCIe Gen3 DSP Gen4 USP x16 Fanout Switch (Alt: PCI1008T-I/5CW) RoHS : Compliant | 0 | |||
| R5F1008EGLA#W0 | Renesas Electronics Corporation | (Alt: R5F1008EGLA#W0) RoHS : Compliant | 0 | |||
| R5F1008DALA#U0 | Renesas Electronics Corporation | (Alt: R5F1008DALA#U0) RoHS : Compliant | 0 | |||
AS6C1008-55SINTR | Alliance Memory Inc | SRAM Chip Async Single 3V 1MBit 128K x 8 55ns 32Pin SOP (Alt: AS6C1008-55SINTR) RoHS : Compliant | 0 | |||
| KBU1008 _B0 _10001 | PanJit Semiconductor | PJTKBU1008 B0 10001 (Alt: KBU1008_B0_10001) RoHS : Compliant | 0 | |||
| GS1008FL _R1 _00001 | PanJit Semiconductor | (Alt: GS1008FL_R1_00001) RoHS : Compliant | 0 | |||
| GLS85VM1008A-M-I-E2-ED214 | Greenliant Systems Ltd | (Alt: GLS85VM1008A-M-I-E2-ED214) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AISC-1008-1R5J-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AISC-1008-2R7G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R027K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R12M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R33J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008HQ-22NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008HQ-82NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q1008-62NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q1008-R82K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1008-390J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASMPH-1008-1R0M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-3R9M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R22K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R75M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008F-100J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | 1008CS-180XJBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 3,800 | ||
| 1008CS-152XKBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,900 | ||
| 1008AS-4R7K-01 | FASTRON GmBH | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,000 | ||
| CO1100-8.000MHZ | Raltron Electronics Corporation | IN STOCK SHIP TODAY |
| 1,118 | ||
| 8346-3651-00-885 | Kyocera AVX Components | IN STOCK SHIP TODAY | 877 | |||
| 70021-0081 | Molex | IN STOCK SHIP TODAY | 800 | |||
| 1008CS-821XKBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 800 | ||
| 1008CS-391XKBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 700 | ||
| 1008HS-100TJBB | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 500 | |||
| 1008CS-271XJBB | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 429 | ||
| 750310084 | Wurth Elektronik | IN STOCK SHIP TODAY |
| 60 | ||
| 1008-820K | API Delevan | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 50 | ||
| 78211-008LF | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Compliant |
| 49 | ||
| MTSW-110-08-G-D-315 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 48 | ||
| HTSW-110-08-S-D-LA | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 15 | ||
 DB Roberts | 10083F | Heyco | HLSP3-12 V-0 NATURAL | 0 | ||
| 78201-010088 | Avdel | LOCKABLE WHEELS OPTION MINI MB | 0 | |||
| 56-111-008 | Southco | Southcos 56 Spring-Loaded Plungers provide convenient installation and removal of components. Activated with a simple pull these plungers offer simplified positioning of sliding component and quick-release for easy removal. The 56 series provides design | 0 | |||
| 56-461-008 | Southco | 56-461-008 | 0 | |||
| 010080B012 | Essentra Components | BINDER SLOTTED SCREW, 0-80 THR | 0 | |||
| 010080H025B | Essentra Components | 080 X 14 HEX HEAD MS BLK M111 | 0 | |||
| 010080P018B | Essentra Components | PAN SLOTTED SCREW, 0-80 THREAD | 0 | |||
| 12SWS1008B | Essentra Components | SHOULDER WASHER, .205 ID, .620 | 0 | |||
| 12031008 | Avdel | PB3400TL-COLLECTOR LOCK TP124- | 0 | |||
| 02251-00813 | Avdel | HEMLOK STR 14 PR ST | 0 | |||
| 10086 | Essentra Components | 0 | ||||
| 10086 | Heyco | HLSP3-18 NATURAL | 0 | |||
| 1008860000VR | Essentra Components | 0 | ||||
| 02221-00818 | Avdel | Rivet,Hemlok 2221 Series Steel | 0 | |||
| 401008B | Essentra Components | UNSCREWING SNAP RIVET, .250 HO | 0 | |||
 EBV Elektronik | DSC1121BM1-008.0000 | Microchip Technology Inc | MEMS Oscillator 8 MHz SMD 5mm x 32mm 50 ppm 3 V DSC1121 (Alt: DSC1121BM1-008.0000) RoHS : Compliant | 504 | ||
| SFA1008G | Taiwan Semiconductor | Diode SuperFast Recovery 600V 10A 3Pin TO220AC Tube (Alt: SFA1008G) RoHS : Compliant | 0 | |||
| TCLT1008 | Vishay Intertechnologies | Optocoupler Transistor Output 1 Channel SOP 4 Pins 60 mA 5 kV 130 (Alt: TCLT1008) RoHS : Compliant | 0 | |||
| SFAF1008G | Taiwan Semiconductor | Diode SuperFast Recovery 600V 10A 2Pin ITO220AC Tube (Alt: SFAF1008G) RoHS : Compliant | 0 | |||
| SFA1008GH | Taiwan Semiconductor | Diode SuperFast Recovery 600V 10A 3Pin TO220AC Tube (Alt: SFA1008GH) RoHS : Compliant | 0 | |||
| KSC1008YBU | onsemi | NPN Epitaxial Silicon Transistor ONSSPCTRNSTVU6M5P (Alt: KSC1008YBU) RoHS : Compliant | 0 | |||
| HERAF1008G | Taiwan Semiconductor | Diode UltraFast Recovery Rectifier 1000V 10A 2Pin ITO220AC Tube (Alt: HERAF1008G) RoHS : Compliant | 0 | |||
| FODM1008R2V | onsemi | Single Channel DC Sensing Input (Alt: FODM1008R2V) RoHS : Compliant | 0 | |||
| FODM1008R4V | onsemi | (Alt: FODM1008R4V) RoHS : Compliant | 0 | |||
| BU1008-E3/45 | Vishay Intertechnologies | 10A800VGPPPOWER BRIDGE RECT (Alt: BU1008-E3/45) RoHS : Compliant | 0 | |||
| 090-15201-008 | Microchip Technology Inc | SYNCSERVER ULTRA LOW PHASE NOISE ULPN MODULE (Alt: 090-15201-008) RoHS : Compliant | 0 | |||
| ICE3AR10080JZXKLA1 | Infineon Technologies AG | PWM Controller Current Mode98 V to 25 V 108 kHz 7 Pins DIP (Alt: SP000775770) RoHS : Compliant | 0 | |||
DSC1001AC1-008.0000-7.00-mm-x-5.00-mm.jpg) | Microchip Technology Inc | MEMS Oscillator 8 MHz SMD 7mm x 5mm 50 ppm 33 V DSC1001 (Alt: DSC1001AC1-008.0000) RoHS : Compliant | 0 | |||
DSC1001CI1-008.0000-3.20-mm-x-2.50-mm.jpg) | Microchip Technology Inc | MEMS Oscillator 8 MHz SMD 32mm x 25mm 50 ppm 33 V DSC1001 (Alt: DSC1001CI1-008.0000) RoHS : Compliant | 0 | |||
| DSC1001DI1-008.0000T | Microchip Technology Inc | MEMS Oscillator 8 MHz SMD 25mm x 2mm 50 ppm 33 V DSC1001 (Alt: DSC1001DI1-008.0000T) RoHS : Compliant | 0 | |||
 ECCO | 97-3057-1008(621) | Amphenol Industrial Operations |
| 1,617 | ||
| 97-3057-1008(621) | Amphenol Industrial Operations |
| 1,617 | |||
| 97-3057-1008 | Amphenol Industrial Operations |
| 1,175 | |||
| 97-3057-1008 | Amphenol Industrial Operations |
| 1,175 | |||
| 0981008000 | ITT Interconnect Solutions |
| 1,091 | |||
| 098-1008-000 | ITT Interconnect Solutions |
| 1,091 | |||
| 040-1008-000-MS | ITT Interconnect Solutions |
| 1,000 | |||
| 97-3057-1008(676) | Amphenol Industrial Operations |
| 831 | |||
| 97-3057-1008(676) | Amphenol Industrial Operations |
| 831 | |||
| 304-1008-000 | ITT Interconnect Solutions |
| 356 | |||
| 3041008000 | ITT Interconnect Solutions |
| 356 | |||
| 044-1008-000 | ITT Interconnect Solutions |
| 338 | |||
| 3300351008 | ITT Interconnect Solutions |
| 218 | |||
| 330-0351-008 | ITT Interconnect Solutions |
| 218 | |||
| 044-1008-000-MS | ITT Interconnect Solutions |
| 100 | |||
 Flip Electronics | KSC1008OBU | onsemi | Stock, Ship Today RoHS : Compliant |
| 53,015 | |
| FODM1008R2 | onsemi | Stock, Ship Today RoHS : Compliant |
| 33,000 | ||
| KSC1008GTA | onsemi | Stock, Ship Today RoHS : Compliant |
| 13,425 | ||
| KSC1008YBU | onsemi | Stock, Ship Today RoHS : Compliant |
| 10,728 | ||
| NB7L1008MNTXG | onsemi | Stock, Ship Today RoHS : Compliant |
| 7,526 | ||
| FODM1008R2V | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,525 | ||
| KSC1008CYTA | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,504 | ||
| FODM1008 | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,504 | ||
NB7L1008MMNG | onsemi | Stock, Ship Today RoHS : Compliant | 1,036 | |||
| Z84C1008PEG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 617 | |||
| R5F1008EALA#U0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 490 | |||
| Z84C1008VEG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 380 | |||
| MMRF1008HR5 | NXP Semiconductors | Stock RoHS : Compliant | 150 | |||
| MMRF1008GHR5 | NXP Semiconductors | Stock RoHS : Compliant | 50 | |||
 Master Electronics | 1008 | Klein Tools Inc | RoHS : Compliant |
| 2 | |
| TW-10-08-L-D-510-080 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MOX1125731008K | Ohmite Mfg Co | Res Thick Film 10G Ohm 10% 1.5W ±25/±100ppm/°C Epoxy AXL RoHS : Not Compliant |
| 0 | ||
| PM1008-12NM-RC | Bourns Inc | Inductor RF Wirewound 0.012uH 20% 100MHz 50Q-Factor Ceramic 0.6A 0.09Ohm DCR 1008 T/R RoHS : Compliant |
| 0 | ||
| PM1008-47NM-RC | Bourns Inc | Inductor RF Wirewound 0.047uH 20% 100MHz 60Q-Factor Ceramic 0.6A 0.16Ohm DCR 1008 T/R RoHS : Compliant |
| 0 | ||
| MTLW-110-08-G-D-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-110-08-G-D-216 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-110-08-G-S-400 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-110-08-L-D-000 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-110-08-L-D-370 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-110-08-T-S-335 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-110-08-T-S-380 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-110-08-F-D-315 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-110-08-F-S-130 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-110-08-H-D-005 | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE910087 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 1 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. Commercial Grade TNC Male to TNC Female Adapter., The commercial grade TNC adapter PE910087 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance. This RF adapter has a male to female gender configuration, which provides easier connections in tighter spaces. Our TNC to TNC adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 1 GHz. This TNC male to TNC female adapter is one of the many RF components that ship the same business day as they are ordered. The PE910087 male TNC to female TNC adapter has a straight body. This Pasternack TNC to TNC coax adapter is an in-line RF adapter in a commercial grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This commercial grade RF adapter has a 1.24-inch length, 0.57-inch width, and 1.6 lbs weight. The PE910087 adapter from Pasternack is made from a brass connector body and has a brass center contact. Our TNC male to TNC female radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. Additional dimensions and specifications for this in-series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of TNC to TNC radio frequency commercial grade adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 1 GHz RF adapter that meets your requirements. |
| 471 | |
| PE910084 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. Commercial Grade TNC Male to BNC Female Adapter., The commercial grade TNC to BNC adapter PE910084 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance. This RF adapter has a male to female gender configuration, which provides easier connections in tighter spaces. This TNC male to BNC female adapter is one of the many RF components that ship the same business day as they are ordered. The PE910084 male TNC to female BNC adapter has a straight body. This Pasternack TNC to BNC coax adapter is an in-line RF adapter in a commercial grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This commercial grade RF adapter has a 1.24-inch length, 0.57-inch width, and 0.6 lbs weight. The PE910084 adapter from Pasternack is made from a brass connector body and has a brass center contact. Our TNC male to BNC female radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. Additional dimensions and specifications for this between series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of TNC to BNC radio frequency commercial grade adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality RF adapter that meets your requirements. |
| 208 | ||
| PE51FP1008-1 | Pasternack Enterprises | Key Specifications, Antenna Type: RHCP Panel, Polarization: RHCP, Minimum Frequency: 902 MHz, Maximum Frequency: 928 MHz, Connector 1 Polarity: Reverse Polarity, Connector Series: SMA, Connector Gender: Plug, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1. |
| 151 | ||
| PE910089 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. Commercial Grade SMA Female to BNC Female Adapter., The commercial grade SMA to BNC adapter PE910089 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance. This RF adapter has a female to female gender configuration, which provides easier connections in tighter spaces. This SMA female to BNC female adapter is one of the many RF components that ship the same business day as they are ordered. The PE910089 female SMA to female BNC adapter has a straight body. This Pasternack SMA to BNC coax adapter is an in-line RF adapter in a commercial grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This commercial grade RF adapter has a 0.88-inch length, 0.5-inch width, and 0.4 lbs weight. The PE910089 adapter from Pasternack is made from a brass connector body and has a brass center contact. Our SMA female to BNC female radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. Additional dimensions and specifications for this between series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of SMA to BNC radio frequency commercial grade adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality RF adapter that meets your requirements. |
| 114 | ||
| PEANMOB1008-NF | Pasternack Enterprises | Key Specifications, Antenna Type: Omni, Polarization: Vertical, Minimum Frequency: 136 MHz, Maximum Frequency: 174 MHz, Connector Series: N, Connector Gender: Female, Maximum Input VSWR: 1.5:1. 136-174 MHz, 3.5 dBi Gain, Omni-directional Antenna with Magnetic NMO Mount, N-Female Connector., Pasternack’s PEANMOB1008-NF is a high performance 5G / LTE outdoor omni directional standard antenna specifically designed for cellular networks, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 5.5 dBi omni Antenna operates within a range of 136 MHz-174 MHz and comes with N Type female Connector which is ideal for 5G, LTE, CDMA, LPWAN/IoT/M2M applications including LoRA, LTE-M, and NB-IOT. Manufactured to the highest international standards, our commercial grade, vertical polarized omni antenna with heavy duty steel mast mounting brackets and a lightweight stainless steel radome is ideally suited for all weather operation. Pasternack's type N connectorized PEANMOB1008-NF antenna has a horizontal HPBW tolerance of Degrees and vertical HPBW tolerance of Degrees with 50 Watts max input power. The single band standard omni directional antenna has a type N female polarity connector, gain nominal of 5.5 dBi gain and can be used to broadcast cellular LTE signals. The model PEANMOB1008-NF designed specifically for the outdoors has an operational temperature between to deg C. Ideal for point to multipoint use in large open areas such as base station installations or large campuses the antenna has an impedance of and max input power of 50 Watts. Built tough, this Type N connector has an overall length of 54.74in, width of 3in, and weighs 1.46lbs. The mounting pole diameter is between in - in, and operates on the cellular band. Pasternack’s PEANMOB1008-NF with black abs colored stainless steel Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANMOB1008-NF is a omni directional standard series antenna with a single band type and has a 5.5 dBi gain nominal. The included mounting bracket and hardware for this single band omni antenna with stainless steel radome, makes it very easy to install. The standard omni directional band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 5.5 dBi standard omni directional 136 MHz-174 MHz N Type female connector antennas. Order our LTE outdoor omni directional standard antenna PEANMOB1008-NF, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx. |
| 47 | ||
| PEWAT1008-3 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-22, Attenuation, Typical: 3 dB, Flange Size: UG-383/U, VSWR: 1.15:1, Minimum Frequency: 33 GHz, Maximum Frequency: 50 GHz, Maximum Power: 4 W. WR-22 Waveguide Fixed Attenuator, 3 dB, from 33 GHz to 50 GHz, UG-383/U Round Cover Flange, 4W Power., WR-22 Pasternack waveguide fixed attenuator PEWAT1008-3 is in stock at our ISO 9001:2008 certified facilities that ship same-day internationally. Pasternack WR-22 gold-plated waveguide attenuators function up to 50 GHz maximum frequency rating. This 33 GHz to 50 GHz fixed waveguide attenuator PEWAT1008-3 has round cover gold-plated flanges and is in stock continuously. Waveguide fixed attenuator WR-22 with aluminum round cover flanges from Pasternack has a high-quality rating of 3 dB attenuation accuracy. Pasternack has been supplying waveguide components like these 33 GHz to 50 GHz 3 dB aluminum fixed attenuators since it started business in 1972. Off-the-shelf online or by phone, we ship these industry-leading round cover UG-383/U gold plated flanged WR-22 waveguide fixed attenuators around the globe. PEWAT1008-3 medium power waveguide fixed attenuator at 50 GHz max frequency and 33 GHz minimum frequency is able to achieve amazing RF performance with 4 watts of peak input power. These 4W WR-22 waveguide attenuators at 3 dB fixed attenuation by Pasternack have a typical 1.15:1 VSWR (voltage standing wave ratio). WR-22 waveguide gold plated fixed attenuator that operates in the 33 GHz to 50 GHz range is 0.224 inches in width. 0.224 inch wide 4W aluminum waveguide attenuator fixed from Pasternack has a length of 2 inches. Satellite, RADAR, and wireless communications systems utilize 50 GHz 0.224 by 2-inch gold-plated waveguide 3 dB attenuators that have round cover UG-383/U flanges. Precise CAD drawings are accessible for these WR-22 3 dB PEWAT1008-3 waveguides with specifications and dimensions on our PDF datasheet download. For any issues with our 4W 0.224 inch wide fixed attenuators that use round cover aluminum flanges, Pasternack tech support experts are always at your disposal. Let Pasternack and our knowledgeable sales team be your first and last stop to purchase top-shelf waveguide components like this 4 watt 3 dB attenuation WR-22 fixed attenuator at 33 GHz to 50 GHz. |
| 1 | ||
| PE3C10086-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 3.5mm Female Bulkhead to TNC Female Bulkhead Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC female bulkhead cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC female bulkhead cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10086-9 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10086-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10086-9 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10084 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. 3.5mm Female to BNC Female Bulkhead Cable Using RG402 Coax. PE3W10084 is a 3.5mm female to BNC female bulkhead cable using RG402 coax. This Pasternack 3.5mm female to BNC female bulkhead cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm BNC for connector 2. Our female 3.5mm to female BNC bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W10084 3.5mm female to BNC female bulkhead cable assembly is constructed with RG402 coax. | 0 | |||
| PE3C10082-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 3.5mm Female to TNC Female Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to TNC female cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to TNC female cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10082-24 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10082-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10082-24 can also be used in the other direction and will be TNC female to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10087-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 3.5mm Male to N Male Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N male cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N male cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10087-9 can also be known as a 3.5mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N plug cable assembly PE3C10087-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10087-9 can also be used in the other direction and will be type N male to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10084-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 3.5mm Female Bulkhead to TNC Male Right Angle Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC male right angle cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC male right angle cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and right angle a TNC cable connection on the other. Our a 3.5mm to right angle a TNC cable assembly has female gender on end 1 and male on end 2. PE3C10084-18 can also be known as a 3.5mm jack to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC plug cable assembly PE3C10084-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to right angle TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10084-18 can also be used in the other direction and will be right angle TNC male to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10087-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 3.5mm Male to N Male Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N male cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N male cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10087-24 can also be known as a 3.5mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N plug cable assembly PE3C10087-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10087-24 can also be used in the other direction and will be type N male to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10080-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 3.5mm Female to TNC Male Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to TNC male cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to TNC male cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and male on end 2. PE3C10080-24 can also be known as a 3.5mm jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC plug cable assembly PE3C10080-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10080-24 can also be used in the other direction and will be TNC male to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10083 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Female to TNC Female Bulkhead Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to TNC female bulkhead cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to TNC female bulkhead cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10083 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10083 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10083 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements. | 0 | |||
| PE3C10083-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 3.5mm Female to TNC Female Bulkhead Cable 6 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to TNC female bulkhead cable 6 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to TNC female bulkhead cable 6 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10083-6 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10083-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10083-6 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements. |
| 0 | ||
 Venkel Ltd. | WRFI1008-S-103JT | VENKEL LTD | Wirewound RF Inductor;1008;10uH;�5% RoHS : Not Compliant | 0 | ||
| WRFI1008-S-22NJT | VENKEL LTD | Wirewound RF Inductor;1008;22nH;�5% RoHS : Not Compliant | 0 | |||
| WRFI1008-S-R27KT | VENKEL LTD | Wirewound RF Inductor;1008;270nH;�10% RoHS : Not Compliant | 0 | |||
| C0201HQN100-8R0CNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;8pF;�0.25pF RoHS : Compliant | 0 | |||
| C0201HQN100-8R8BNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;8.8pF;�0.1pF RoHS : Compliant | 0 | |||
| C0201HQN100-8R5DNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;8.5pF;�0.5pF RoHS : Compliant | 0 | |||
| C0201HQN100-8R6BNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;8.6pF;�0.1pF RoHS : Compliant | 0 | |||
| WRFI1008-S-1R2KT | VENKEL LTD | Wirewound RF Inductor;1008;1.2uH;�10% RoHS : Not Compliant | 0 | |||
| WRFI1008-S-R22JT | VENKEL LTD | Wirewound RF Inductor;1008;220nH;�5% RoHS : Not Compliant | 0 | |||
| WRFI1008-S-R30KT | VENKEL LTD | Wirewound RF Inductor;1008;300nH;�10% RoHS : Not Compliant | 0 | |||
| WRFI1008-S-R43GT | VENKEL LTD | Wirewound RF Inductor;1008;430nH;�2% RoHS : Not Compliant | 0 | |||
| C0201HQN100-8R3CNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;8.3pF;�0.25pF RoHS : Compliant | 0 | |||
| WRFI1008-S-3R3KT | VENKEL LTD | Wirewound RF Inductor;1008;3.3uH;�10% RoHS : Not Compliant | 0 | |||
| WRFI1008-S-R24KT | VENKEL LTD | Wirewound RF Inductor;1008;240nH;�10% RoHS : Not Compliant | 0 | |||
| WRFI1008-S-R82GT | VENKEL LTD | Wirewound RF Inductor;1008;820nH;�2% RoHS : Not Compliant | 0 | |||
 Vyrian | 10080054-528LF | Amphenol Communications Solutions | Board Connector, 40 Contact(s), 2 Row(s), Male, Straight, Press Fit Terminal | 12,989 | ||
74AC11008DG4 | Texas Instruments | AND Gate, AC Series, 4-Func, 2-Input, CMOS, PDSO16 RoHS : Compliant | 8,802 | |||
| ADSP1008KD | Analog Devices Inc | Multiplier Accumulator/Summer, CMOS, CDIP48 RoHS : Not Compliant | 7,905 | |||
MT5C1008SJ-17L | Micron Technology Inc | Standard SRAM, 128KX8, 17ns, CMOS, PDSO32 RoHS : Not Compliant | 6,350 | |||
| MT5C1008EC45P/883C | Micron Technology Inc | Standard SRAM, 128KX8, 45ns, CMOS, CDSO32 RoHS : Not Compliant | 5,425 | |||
| MT5C1008XWM2-45 | Micron Technology Inc | Memory IC | 5,371 | |||
| MT5C1008SJ-25LAT | Micron Technology Inc | Standard SRAM, 128KX8, 25ns, CMOS, PDSO32 RoHS : Not Compliant | 4,302 | |||
| MT5C1008S01AWC1 | Micron Technology Inc | Memory IC | 4,225 | |||
| MT5C1008SJ-12IT | Micron Technology Inc | 4,150 | ||||
| MT5C1008-12LP | Micron Technology Inc | Standard SRAM, 128KX8, 12ns, CMOS, PDIP32 RoHS : Not Compliant | 4,021 | |||
| MT5C1008-25XT | Micron Technology Inc | Standard SRAM, 128KX8, 25ns, CMOS, PDIP32 RoHS : Not Compliant | 3,663 | |||
| MT5C1008DCJ20P/883C | Micron Technology Inc | Standard SRAM, 128KX8, 20ns, CMOS, CDSO32 RoHS : Not Compliant | 3,268 | |||
| MT5C1008-25L | Micron Technology Inc | Standard SRAM, 128KX8, 25ns, CMOS, PDIP32 RoHS : Not Compliant | 3,138 | |||
| MT5C1008EC20 | Micron Technology Inc | Standard SRAM, 128KX8, 20ns, CMOS, CDSO32 RoHS : Not Compliant | 2,437 | |||
| 1008LS-223XJLB | Coilcraft Inc | General Purpose Inductor, 22uH, 5%, 1 Element, Ceramic-ferrite-Core, SMD, 1008 RoHS : Compliant | 715 | |||
 Waytek, Inc. | 10080 | Hillsdale Terminal & Tool Inc | 22-18 GA Butt Connectors NON-INSULATED |
| 184,867 | |
| 19141-0085 | Molex | 12-10 GA #10 Spade Terminal Non-Insulated RoHS : Compliant |
| 20,546 | ||
| OS110-08 | NSPA | 12-10GA Ring #8 Connector Yellow Stripe Heat Shrink Clear 3280132508 32708 |
| 1,502 | ||
| 13510085 | Aptiv PLC | 2 Way Female GT 150 Sealed Connector DELPHI 13510085 |
| 1,272 | ||
| 57080 OR 611-008 | Ideal Clamp Products Inc | Standard Stainless Steel Band Hose Clamp #8 Band 1/2" 7/16 TO 1 IN |
| 1,131 | ||
| 14100853 | Sargent Quality Tools | Crimp Tool Ratchet Assembly Delphi GM 08913440 Formally MFG PN 3182 LCT |
| 11 | ||
| 14100855 | Sargent Quality Tools | Metri-Pack Crimping Tool DELPHI # 12070947 (Formally PN SP2740/3184LCT) |
| 1 | ||
| 14100859 | Sargent Quality Tools | Crimp Tool 8 Ga - 2 Ga (Formally PN SP2747 / 6220 CT) |
| 0 | ||
 Win Source Electronics | 046841033100846+ | Kyocera Electronic Components & Devices | CONN FPC VERT 33POS 0.3MM SMD |
| 144,400 | |
| ZXCT1008FTA | Diodes Incorporated | IC CURRENT MONITOR 1% SOT23-3 RoHS : Compliant |
| 100,437 | ||
| LTV-1008-TP-G | Lite-On Semiconductor Corporation | RoHS : Compliant |
| 78,000 | ||
| CPC1008N | IXYS Integrated Circuits Division | SSR RELAY SPST-NO 150MA 0-100V / Solid State SPST-NO (1 Form A) 4-SOP (0.150", 3.81mm) RoHS : Compliant |
| 48,828 | ||
| CPC1008NTR | IXYS Integrated Circuits Division | RELAY OPTOMOS SP-NO 150MA 4-SOP RoHS : Compliant |
| 44,090 | ||
| MADL-011008-14120T | MACOM | Low Insertion Loss and Noise Figure | RF DIODE PIN 6DFN RoHS : Compliant |
| 28,846 | ||
| FSMD010-0805-R | Fuzetec Technology Co Ltd | RESETTABLE FUSE - SMD, 0805 SIZE |
| 16,593 | ||
| CLA4610-085LF | Skyworks Solutions Inc | RF DIODE PIN 120V 10W 3QFN / RF Diode PIN - Single 120V 100 mA 10 W 3-QFN (2x2) RoHS : Compliant |
| 10,000 | ||
| 744771008 | Wurth Elektronik | POWER-CHOKE WE-PD | FIXED IND 8.2UH 6.25A 20 MOHM RoHS : Compliant |
| 6,000 | ||
| FPF1008 | onsemi | IC PWR SWITCH P-CH 1:1 6MICROFET RoHS : Compliant |
| 3,500 | ||
| NB7L1008MMNG | onsemi | IC CLK BUFFER 1:8 8GHZ 32QFN RoHS : Compliant |
| 3,189 | ||
AS6C1008-55SIN | Alliance Memory Inc | SRAM Chip Async Single 3V 1M-bit 128K x 8 55ns 32-Pin SOP Tube / IC SRAM 1MBIT 55NS 32SOP RoHS : Compliant |
| 2,670 | ||
| AS6C1008-55SINTR | Alliance Memory Inc | IC SRAM 1MBIT 55NS 32SOP RoHS : Compliant |
| 2,440 | ||
| 65801-008LF | Amphenol Corporation | CONN FFC FPC RCPT 8POS 2.54MM / 8 Position FFC, FPC Connector Receptacle 0.100" (2.54mm) Free Hanging (In-Line) |
| 1,500 | ||
| M5M51008DFP-55H | Renesas Electronics Corporation | RoHS : Compliant |
| 949 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Portuguese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Polish
Vietnamese
Indian
Mexican
British
New Zealand