080PT80-R Price, Revenda, Stock

Key Specifications, Antenna Type: Flat Panel, Polarization: Vertical and Horizontal, Minimum Frequency: 2.4 GHz, Maximum Frequency: 7.25 GHz, Connector 1 Polarity: Reverse Polarity, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. WiFi 6e, 2400-2500/5150-7250 MHz 6 / 6 dBi, 4x4 MIMO Panel, RP-SMA Male. The PEANFP1080 WiFi 6e 4x4 MIMO Flat Panel Antenna from Pasternack is a high performance directional antenna designed for the 2400 MHz to 7125 MHz bands and is available to ship same day. It features 4 (four) pigtails terminated with Reverse Polarity SMA (RP-SMA) male connectors for 4X4 MIMO applications. It is a UV protected, outdoor rated antenna with 60 degree horizontal half power beamwidth. The PEANFP1080 is ideally suited for 802.11 protocols including 802.11ax as well as IoT, Zigbee and Bluetooth. The Pasternack high performance flat panel PEANFP1080 is a rugged antenna providing broad coverage, low latency, increased network capacity and 6 dBi gain. This 4 port RP-SMA flat panel directional antenna is suitable for commercial radios and access points in public and private networks that are equipped with RP-SMA female connectors. Pasternack’s PEANFP1080 supports 2.4, 5 and 6 GHz bands. This WiFi 6e PEANFP1080 60 degree flat panel antenna with 4 Reverse Polarity SMA connectors, as well as our wide selection of superior quality RF parts, ships same day. Contact our knowledgeable and friendly technical support and sales staff for your answers on antennas or other Pasternack products.

1 : $685.0
10 : $657.6
25 : $630.2
100 : $602.8

PE2080

Pasternack Enterprises

Key Specifications, Connector Series In: SMA, Connector Gender In: Male, Minimum Frequency: 4 GHz, Maximum Frequency: 8 GHz, Number of Output Ports: 2 Port, Impedance: 50 Ohm, Maximum Input Power: 10 Watt. 2 Way SMA Wilkinson Power Divider From 4 GHz to 8 GHz Rated at 10 Watts. PE2080 2 way SMA power divider (also known as a SMA coaxial power splitter) is rated for a minimum frequency of 4 GHz and a maximum frequency of 8 GHz. This Pasternack 2 port SMA power divider / coaxial splitter has a 50 Ohm impedance and a maxium input power of 10 Watts. Our SMA coaxial RF splitter / divider has a male SMA input and 2 male SMA output ports. This 2 way SMA RF power divider from Pasternack is a wilkinson design and has a maximum insertion loss of 0. The maximum input VSWR of this SMA wilkinson splitter / divider is 1.3:1 and the minimum isolation is 20 dB. Our 2 port SMA power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This wilkinson 2 way SMA male coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $745.0
10 : $715.2
25 : $685.4

PE3W08080

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. N Male to TNC Female 4 Hole Flange Cable Using RG188-DS Coax. PE3W08080 is a N male to TNC female 4 hole flange cable using RG188-DS coax. This Pasternack N male to TNC female 4 hole flange cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to female TNC 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08080 N male to TNC female 4 hole flange cable assembly is constructed with RG188-DS coax.

PE3C4080LF/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to Reverse Polarity SMA Jack Low Loss Cable 48 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to reverse polarity SMA jack low loss cable 48 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to reverse polarity SMA jack low loss cable 48 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a reverse polarity SMA cable connection on the other. Our low loss type N to reverse polarity SMA cable assembly has a male gender on end 1 and a jack on end 2. PE3C4080LF/HS-48 can also be known as a low loss type N plug to reverse polarity SMA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C4080LF/HS-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Type N plug to reverse polarity SMA female cable assembly PE3C4080LF/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C4080LF/HS-48 can also be used in the other direction and will be a reverse polarity SMA jack to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA reverse polarity female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25

PE3C5080

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-LLPL, RF Cable Type: LMR-195-LLPL, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to Reverse Polarity SMA Female Cable Using LMR-195-LLPL Coax., Radio frequency assembly reverse polarity SMA male to reverse polarity SMA female cable using LMR-195-LLPL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA male to reverse polarity SMA female cable using LMR-195-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This reverse polarity SMA to reverse polarity SMA cable is a male to female coax assembly, PE3C5080, can also be known as a reverse polarity SMA plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to reverse polarity SMA jack cable assembly PE3C5080 is built with LMR-195-LLPL which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA male to reverse polarity SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5080 can also be used in the other direction and will be reverse polarity SMA female to reverse polarity SMA male cable assembly if the opposite connectivity is required. SMA reverse polarity plug to SMA reverse polarity jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to reverse polarity SMA female cable using LMR-195-LLPL coax.

PE3W08045

Pasternack Enterprises

Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. QN Male to N Male Cable Using LMR-195 Coax. PE3W08045 is a QN male to N male cable using LMR-195 coax. This Pasternack QN male to N male cable assembly uses a 50 Ohm QN for connector 1 and a 50 Ohm N for connector 2. Our male QN to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08045 QN male to N male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W08052/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMA Male Cable Using PE-SR405FLJ Coax with HeatShrink, LF Solder., Pasternack’s PE3W08052/BK/HS right angle SMP female to SMA male RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMP cable connection on one end and an SMA cable connection on the other. Our SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W08052/BK/HS can also be known as a right angle SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W08052/BK/HS RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our right angle SMP female to SMA male cable has a maximum VSWR of 1.4:1. This PE3W08052/BK/HS SMP jack to SMA plug cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method with gold plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W08052/BK/HS can also be used in the other direction and will be an SMA male to right angle SMP female cable assembly if the opposite connectivity is required. This SMP right angle jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMA RF cable assembly as per your requirements.

PE3W08090

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. MCX Jack to MCX Jack Cable Using RG188 Coax. PE3W08090 is a MCX jack to MCX jack cable using RG188 coax. This Pasternack MCX jack to MCX jack cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MCX for connector 2. Our jack MCX to jack MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08090 MCX jack to MCX jack cable assembly is constructed with RG188 coax.

PE3C10809

Pasternack Enterprises

PE3C6080

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Blue FAKRA Plug to FAKRA Jack Cable Using RG316 Coax., Radio frequency assembly blue FAKRA plug to FAKRA jack cable using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Blue FAKRA plug to FAKRA jack cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our FAKRA to FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. This FAKRA to FAKRA cable is a plug to jack coax assembly, PE3C6080, can also be known as a FAKRA male to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA male to FAKRA female cable assembly PE3C6080 is built with RG316 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency FAKRA plug to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6080 can also be used in the other direction and will be FAKRA jack to FAKRA plug cable assembly if the opposite connectivity is required. FAKRA male to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this blue FAKRA plug to FAKRA jack cable using RG316 coax.

PE3W00080

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to N Male Right Angle Cable Using RG213 Coax. PE3W00080 is a BNC male right angle to N male right angle cable using RG213 coax. This Pasternack BNC male right angle to N male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. BNC right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00080 BNC male right angle to N male right angle cable assembly is constructed with RG213 coax.

PE3W00808LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-400-UF Coax with HeatShrink, LF Solder, RoHS. PE3W00808LF/HS is a TNC male to TNC male cable using LMR-400-UF coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00808LF/HS TNC male to TNC male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W08024/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Male to N Male Cable Using PE-SR405FLJ Coax with HeatShrink. PE3W08024/HS is a SMA male to N male cable using PE-SR405FLJ coax. This Pasternack SMA male to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to male N cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W08024/HS SMA male to N male cable assembly is constructed with PE-SR405FLJ coax.

PE3W08050-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SSMA Male to BNC Female Bulkhead Low Loss Cable 200 CM Length Using LMR-100 Coax., Radio frequency assembly SSMA male to BNC female bulkhead low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMA male to BNC female bulkhead low loss cable 200 cm length using LMR-100 coax, SSMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SSMA cable connection on one end and BNC bulkhead cable connection on the other. Our low loss SSMA to BNC cable assemblies have a male gender on end 1 and female on end 2. PE3W08050-200CM can also be known as a low loss SSMA plug to BNC jack cable assembly and will be shipped same-day as it is purchased. SSMA plug to BNC jack cable assembly PE3W08050-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SSMA male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08050-200CM can also be used in the other direction and will be BNC female bulkhead to SSMA male cable assembly if the opposite connectivity is required. Low loss SSMA plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to BNC cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA male to BNC female bulkhead low loss cable 200 cm length using LMR-100 coax.

1 : $97.99
25 : $93.09
50 : $88.19
100 : $84.27

PE3W08073

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to Reverse Polarity SMA Male Cable Using RG141 Coax. PE3W08073 is a reverse polarity SMA male right angle to reverse polarity SMA male cable using RG141 coax. This Pasternack reverse polarity SMA male right angle to reverse polarity SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08073 SMA reverse polarity male right angle to SMA reverse polarity male cable assembly is constructed with RG141 coax.

Waytek, Inc.

57080 OR 611-008

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #8 Band 1/2" 7/16 TO 1 IN

10 : $1.378
50 : $1.2299
100 : $1.116
200 : $1.0819
500 : $1.0421
1,000 : $1.0022

1,131

TPS080808

Thomas & Betts

Thomas & Betts Harnessflex TPS080808 hinged tee fitting is a conduit branch fitting with .250" left, center, and right openings for corrugated loom routing. Its hinged tee design supports clean three-way harness branching while maintaining organized conduit protection in vehicle and equipment wiring applications.

1 : $5.6495
50 : $5.0359
100 : $4.5704
200 : $4.4223
500 : $4.2741
1,000 : $4.1049

970

185080F-01-1

Eaton Electronics

80 Amp Manual Reset Hi Amp Surface Mount Circuit Breaker Like CB185-80 46691

1 : $36.0
5 : $34.64
10 : $33.45
50 : $31.75
100 : $30.73
200 : $29.55

900

YPS080808

Thomas & Betts

Thomas & Betts Harnessflex YPS080808 hinged Y fitting is a conduit branch fitting with .250" left, center, and right openings for corrugated loom routing. Its hinged Y design supports smooth harness branching while maintaining organized conduit protection in vehicle and equipment wiring applications.

1 : $4.1118
50 : $3.6652
100 : $3.3264
200 : $3.2186
500 : $3.1108
1,000 : $2.9876

673

181080F-01-1

Eaton Electronics

80 Amp Auto Reset Hi Amp Surface Mount Circuit Breaker

1 : $36.12
5 : $32.26
10 : $30.08
50 : $28.39
100 : $27.05
200 : $25.88

474

08099080

Littelfuse Inc

Manual Battery Disconnect SPST W/Boot 150A M10 Term Zinc-plated steel

1 : $27.14
10 : $24.23
50 : $22.29
100 : $21.56
200 : $20.84
500 : $20.23

260