059-K02-R Price, Revenda, Stock

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMP Female Right Angle to MMCX Plug Cable 36 Inch Length Using PE-SR047FL Coax., Radio frequency assembly SMP female right angle to MMCX plug cable 36 inch length using PE-SR047FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to MMCX plug cable 36 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and MMCX cable connection on the other. Our right angle SMP to MMCX cable assemblies have a female gender on end 1 and plug on end 2. PE3W05921-36 can also be known as a right angle SMP jack to MMCX male cable assembly and will be shipped same-day as it is purchased. SMP jack to MMCX male cable assembly PE3W05921-36 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMP right angle female to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05921-36 can also be used in the other direction and will be MMCX plug to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to MMCX cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to MMCX plug cable 36 inch length using PE-SR047FL coax.

1 : $126.99
25 : $120.64
50 : $114.29
100 : $109.21

PE3C9059

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. Push-On 4.3-10 Male to Push-On 4.3-10 Male Right Angle Cable Using Tinned RG402 Coax. PE3C9059 is a 4.3-10 male to 4.3-10 male right angle cable using RG402 Tinned coax. This Pasternack 4.3-10 male to 4.3-10 male right angle cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 4.3-10 for connector 2. 4.3-10 to 4.3-10 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 4.3-10 to male 4.3-10 right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9059 4.3-10 male to 4.3-10 male right angle cable assembly is constructed with RG402 Tinned coax.

PE3MSA00598-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. LSZH TRB Threaded Plug to 3-Lug TRB Jack for TWCH-78-2, 48" Twinax Cable., Radio frequency assembly LSZH TRB threaded plug to 3-Lug TRB jack for TWCH-78-2, 48" twinax cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The LSZH TRB threaded plug to 3-Lug TRB jack for TWCH-78-2, 48" twinax cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00598-48 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MSA00598-48 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00598-48 can also be used in the other direction and will be TRB jack to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LSZH TRB threaded plug to 3-Lug TRB jack for TWCH-78-2, 48" twinax cable.

1 : $361.99
25 : $343.89
50 : $325.79
100 : $311.31

PE3W00593

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug Right Angle to 1.0/2.3 Plug Right Ang. PE3W00593 is a 1.0/2.3 plug right angle to 1.0/2.3 plug right angle cable using RG188-DS coax. This Pasternack 1.0/2.3 plug right angle to 1.0/2.3 plug right angle cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. 1.0/2.3 right angle to 1.0/2.3 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug 1.0/2.3 right angle to plug 1.0/2.3 right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00593 1.0/2.3 plug right angle to 1.0/2.3 plug right angle cable assembly is constructed with RG188-DS coax.

PE3W03059

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. SMA Male to N Male Right Angle Cable Using RG214 Coax. PE3W03059 is a SMA male to N male right angle cable using RG214 coax. This Pasternack SMA male to N male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03059 SMA male to N male right angle cable assembly is constructed with RG214 coax.

PE3W05912

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to BNC Male Right Angle Cable Using RG58 Coax. PE3W05912 is a N male to BNC male right angle cable using RG58 coax. This Pasternack N male to BNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. N to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05912 N male to BNC male right angle cable assembly is constructed with RG58 coax.

PE3W05930-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Female 2 Hole Flange to SMP Female Cable 100 cm Length Using PE-047SR Coax., Radio frequency assembly SMA female 2 hole flange to SMP female cable 100 cm length using PE-047SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to SMP female cable 100 cm length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our SMA to SMP cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMP cable is a female to female coax assembly, PE3W05930-100CM, can also be known as a SMA jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3W05930-100CM is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05930-100CM can also be used in the other direction and will be SMP female to SMA female 2 hole flange cable assembly if the opposite connectivity is required. SMA jack 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to SMP female cable 100 cm length using PE-047SR coax.

1 : $145.99
25 : $138.69
50 : $131.39
100 : $125.55

PE3W05949

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. Jack to MCX Jack Cable Using RG316-DS Coax. PE3W05949 is a FAKRA jack to MCX jack cable using RG316-DS coax. This Pasternack FAKRA jack to MCX jack cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm MCX for connector 2. Our jack FAKRA to jack MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05949 FAKRA jack to MCX jack cable assembly is constructed with RG316-DS coax.

PEWCT1059

Pasternack Enterprises

1 : $3,130.0
5 : $3,004.8
10 : $2,879.6

PE3C10592

Pasternack Enterprises

PE39059

Pasternack Enterprises

PE3C0592

Pasternack Enterprises

PE3C10595

Pasternack Enterprises

PE3MSA00594-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: JACK, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. LSZH Bend Relief 3-Lug TRB Jack with Blunt Cut 1553 Cable 36 Inch Length Using 78 Ohm TWCH-78-2 Twinax., Radio frequency assembly LSZH bend relief 3-Lug TRB jack with blunt cut 1553 cable 36 inch length using 78 Ohm TWCH-78-2 twinax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The LSZH bend relief 3-Lug TRB jack with blunt cut 1553 cable 36 inch length using 78 Ohm TWCH-78-2 twinax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00594-36 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00594-36 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00594-36 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LSZH bend relief 3-Lug TRB jack with blunt cut 1553 cable 36 inch length using 78 Ohm TWCH-78-2 twinax.

1 : $320.99
25 : $304.94
50 : $288.89
100 : $276.05

PE3W00596

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: NMO Mount, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMB Jack Bulkhead to NMO Mount Sexless Cable Using. PE3W00596 is a SMB jack bulkhead to NMO Mount sexless cable using LMR-195 coax. This Pasternack SMB jack bulkhead to NMO Mount sexless cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm NMO Mount for connector 2. Our jack SMB bulkhead to sexless NMO Mount cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00596 SMB jack bulkhead to NMO Mount sexless cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

Relay Specialties

PTQ-11059

BUD Industries Inc

Fiberglass Box NEMA 1, 2, 4, 4X, 6 11.81x7.87x5.91 in; Hinged

1 : $59.7
5 : $54.73
10 : $53.25
25 : $51.85
50 : $50.52

Teledyne HiRel

5962-9059001MDA

Teledyne HiRel

HEX INVERTER, WITH OPEN-DRAIN OUTPUTS
RoHS : Not Compliant

5962-9059001BCA

Teledyne HiRel

HEX INVERTER, WITH OPEN-DRAIN OUTPUTS
RoHS : Not Compliant

5962-9059001B2A

Teledyne HiRel

HEX INVERTER, WITH OPEN-DRAIN OUTPUTS
RoHS : Not Compliant

5962-9059001MCA

Teledyne HiRel

HEX INVERTER, WITH OPEN-DRAIN OUTPUTS
RoHS : Not Compliant

5962-9059001BDA

Teledyne HiRel

HEX INVERTER, WITH OPEN-DRAIN OUTPUTS
RoHS : Not Compliant

5962-9059001M2A

Teledyne HiRel

HEX INVERTER, WITH OPEN-DRAIN OUTPUTS
RoHS : Not Compliant

Venkel Ltd.

CMCC0805900NT

VENKEL LTD

Common Mode Choke Coil;0805;90R;�30%
RoHS : Compliant

8,025

CMCC0805900MT

VENKEL LTD

Common Mode Choke Coil;0805;90R;�20%
RoHS : Compliant

8,025

CMCC0805900ST

VENKEL LTD

Common Mode Choke Coil;0805;90R;�25%
RoHS : Compliant

8,025

FBC0805-900P

VENKEL LTD

High Current Ferrite Bead;0805;90R
RoHS : Compliant

Vyrian

3059Y-1-101LF

Bourns Inc

Trimmer, Cermet, 1W, 100ohm, 400V, 10% +/-Tol, 100ppm/Cel, 22 Turn(s)
RoHS : Compliant

16,267

MAX15059AETE+

Analog Devices Inc

Switching Regulator, Current-mode, 1.3A, 420kHz Switching Freq-Max, BICMOS
RoHS : Compliant

11,038

MAX16059AT34+T

Analog Devices Inc

Power Supply Support Circuit
RoHS : Compliant

10,680

MAX16059ATT25+

Analog Devices Inc

Power Supply Support Circuit
RoHS : Compliant

10,120

MAX16059ATT45+

Analog Devices Inc

Power Supply Support Circuit
RoHS : Compliant

9,638

5962-9059701MEA

Texas Instruments

Ring Counter, HCT Series, Synchronous, Positive Edge Triggered, 10-Bit, Up Direction, CMOS, CDIP16

9,231

AD45059-REEL7

Analog Devices Inc

7,878

MAX16059ATT25+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +2.5V, BICMOS
RoHS : Compliant

7,470

MAX16059ATT27+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +2.7V, BICMOS
RoHS : Compliant

7,325

MAX16059AT36+T

Analog Devices Inc

Power Supply Support Circuit
RoHS : Compliant

6,969

8405901DA

Texas Instruments

5,846

67227-059LF

Amphenol Communications Solutions

Board Connector, 118 Contact(s), 2 Row(s), Female, Right Angle, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug

4,790

CD54HC4059F3A

Texas Instruments

Divide By N Counter, HC/UH Series, Synchronous, Positive Edge Triggered, Down Direction, CMOS, CDIP24
RoHS : Not Compliant

3,233

CA3059

onsemi

Analog Circuit, 1 Func, BIPolar, PDIP14
RoHS : Not Compliant

2,665

R172A8-051-D0590

Nmb Technologies

DC Fan, Axial Construction, 8.6A, 24V, 206.4W

826