 |
Os motores de busca de Datasheet de Componentes eletrônicos |
|
|
Os motores de busca de Datasheet de Componentes eletrônicos |
|
040D3JB2 Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
 ECCO | 304-0145-000 | ITT Interconnect Solutions |
| 2,537 | ||
| 1040292000 | ITT Interconnect Solutions |
| 1,330 | |||
| 0580604000 | ITT Interconnect Solutions |
| 1,081 | |||
| 040-0034-020 | ITT Interconnect Solutions |
| 559 | |||
| 237-0403-000 | ITT Interconnect Solutions |
| 340 | |||
| 1040293000 | ITT Interconnect Solutions |
| 312 | |||
| 104-0284-000 | ITT Interconnect Solutions |
| 251 | |||
| 1040301000 | ITT Interconnect Solutions |
| 95 | |||
| 1040285000 | ITT Interconnect Solutions |
| 95 | |||
| 104-0297-000 | ITT Interconnect Solutions |
| 90 | |||
| 0400059000 | ITT Interconnect Solutions |
| 75 | |||
| 237-0409-000 | ITT Interconnect Solutions |
| 74 | |||
| 2370408000 | ITT Interconnect Solutions |
| 60 | |||
| 0190040005 | Molex | RoHS : Compliant |
| 25 | ||
| 040-0034-024 | ITT Interconnect Solutions |
| 7 | |||
 FDH Electronics | Y10500040400078PSF | TE Connectivity | Circular Conn |
| 9,543 | |
| RV520-0404-001 | Amphenol Cable & Interconnect Technologies | Wire and Cable | 342 | |||
| 550-004040 | FDH Electronics | Supplies - RF | 54 | |||
| 804-004-01MT10-26P | Glenair Inc | Circular Conn RoHS : Compliant | 1 | |||
| 804-004-01NF14-55SA | Glenair Inc | Connector Misc RoHS : Not Compliant | 0 | |||
| 804-004-01M11-31SA | Glenair Inc | Circular Conn RoHS : Compliant | 0 | |||
| 804-004-01NF5-3S | Glenair Inc | Placeholder RoHS : Not Compliant | 0 | |||
| 804-004-07M14-207P | Glenair Inc | Connector Misc | 0 | |||
| 50025113B040040-21 | Honeywell Sensing and Control | Switches |
| 0 | ||
| 804-004-01ZNU7-1S | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 804-004-07ZNU7-1P | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 804-004-07M7-1S | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 804-004-07M7-1P | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 804-004-01ZR9-19PA | Glenair Inc | Backshells & Ac | 0 | |||
| 804-004-00M7-1P | Glenair Inc | Connector RoHS : Compliant | 0 | |||
 Neutron USA | CP604040 | CUI Inc | Thermoelectric Peltier Modules peltier, 40 x 40 x 4, 6 A, wire leads, arcTEC |
| 50 | |
ATS-CPX040040020-115-C2-R0 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Blue, Square Fin, 40mm L, 40mm W, 20mm H, 5.33C/W at 100LFM RoHS : Compliant |
| 50 | ||
ATS-CPX040040015-154-C2-R0 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Coarse-Pitch, Straight, Left-Tab, T766, 40x40x15mm, 7.51C/W RoHS : Compliant |
| 50 | ||
| 21350400406100 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 A-code 4-pin Angled female to open end, 10m, PUR yellow jacket |
| 39 | ||
| 21404040446050 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 D-COD 4-POL ST/ST M/M PVC RoHS : Compliant |
| 14 | ||
ATS-FPX040040035-66-C2-R0 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Fine-Pitch, Straight, Left-Tab, T766, 40x40x35mm, 5.77C/W RoHS : Compliant |
| 12 | ||
| 120040400 | Norgren | Fitting, nkl pl, PLUG,1/4 |
| 10 | ||
| 33400400204030 | HARTING Technology Group | Specialized Cables Han 1A OM 3+PE +latch m/- PUR 3m RoHS : Compliant |
| 10 | ||
| ATS040040006-PF-13E | Advanced Thermal Solutions Inc | Heat Sinks BGA Heat Sink, Pin Fin, No TIM, Black Anodized RoHS : Compliant |
| 9 | ||
| 1.04.0076.04000 | Hms Industrial Networks AB | Specialized Cables Ixxat M12-to-SUB D9 converter cable |
| 5 | ||
ATS-CPX040040025-116-C1-R0 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Coarse-Pitch, X-Cut, 4-Corner Hole, 40x40x25mm, 4.11C/W RoHS : Compliant |
| 0 | ||
| 21404040447100 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 D-COD 4-POL ST/ST M/M RAIL RoHS : Compliant |
| 0 | ||
| T4171210404-001 | TE Connectivity | M12 FRONT MOUNTING MALE B 4P 0.2M WIRE RoHS : Compliant |
| 0 | ||
| ATS-CPX040040025-116-C2-R0 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Coarse-Pitch, X-Cut, 4-Corner Hole, T766, 40x40x25mm, 4.14C/W RoHS : Compliant |
| 0 | ||
| 200-404-01 | Altech Corporation | Enclosures for Industrial Automation POLY ENC GRAY 122X82X55mm |
| 0 | ||
 Pasternack Enterprises US | PE3M0040-30 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/84-RG223-0XDS2, RF Cable Type: M17/84-RG223, RF Cable Impedance: 50 Ohm, Length: 30 inches. MIL-DTL-17 N Female to N Female Bulkhead Cable 30 Inch Length Using M17/84-RG223 Coax., Radio frequency assembly MIL-DTL-17 N female to N female bulkhead cable 30 inch length using M17/84-RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female to N female bulkhead cable 30 inch length using M17/84-RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/02-0503 type N to M39012/03-0503 N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/02-0503 type N cable connection on one end and M39012/03-0503 type N bulkhead cable connection on the other. Our M39012/02-0503 type N to M39012/03-0503 N type cable assemblies have a female gender on end 1 and female on end 2. This M39012/02-0503 type N to M39012/03-0503 N type cable is a female to female coax assembly, PE3M0040-30, can also be known as a MIL-DTL-17/MIL-C-17 M39012/02-0503 type N jack to M39012/03-0503 N type jack cable assembly and will be shipped same-day as it is purchased. M39012/02-0503 type N jack to M39012/03-0503 type N jack cable assembly PE3M0040-30 is built with M17/84-RG223 which is a flexible coax type. The Pasternack flexible M39012/02-0503 N cable assembly is manufactured with M39012/02-0503 type N to M39012/03-0503 type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/02-0503 N type female to M39012/03-0503 type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0040-30 can also be used in the other direction and will be M39012/03-0503 type N female bulkhead to M39012/02-0503 N type female cable assembly if the opposite connectivity is required. M39012/02-0503 N type jack to M39012/03-0503 type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/02-0503 type N to M39012/03-0503 type N cable assembly for quick shipment worldwide. Variations of M39012/02-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female to N female bulkhead cable 30 inch length using M17/84-RG223 coax. |
| 88 | |
| PE3C10402-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated TNC Male Right Angle to TNC Male Right Angle Low Loss Cable 12 Inch Length Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male right angle to TNC male right angle low loss cable 12 inch length using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male right angle to TNC male right angle low loss cable 12 inch length using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a TNC cable connection on one end and right angle a TNC cable connection on the other. Our low loss right angle a TNC to right angle a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10402-12 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10402-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. TNC plug to TNC plug cable assembly PE3C10402-12 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 64 | ||
| PE3C10402-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated TNC Male Right Angle to TNC Male Right Angle Low Loss Cable 60 Inch Length Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male right angle to TNC male right angle low loss cable 60 inch length using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male right angle to TNC male right angle low loss cable 60 inch length using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a TNC cable connection on one end and right angle a TNC cable connection on the other. Our low loss right angle a TNC to right angle a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10402-60 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10402-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. TNC plug to TNC plug cable assembly PE3C10402-60 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 12 | ||
| PE3M0407-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 16, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 16, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: M17/113-RG316, RF Cable Type: Coax, RF Cable Specification: MIL-DTL-17, RF Cable Impedance : 50 Ohm. MIL Size 16 Contact Socket to MIL Size 16 Contact Socket Cable, D38999 Series I, III, IV, 12 Inch Length Using M17/113-RG316. The PE3M0407-12 from Pasternack is a D38999 contact cable assembly that is built with a size 16 M39029 socket contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 700 MHz. The PE3M0407-12 RF cable has a FEP jacket of 0.980-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0407-12 in-series RF cable has 0.5 inches of repeated minimum bend radius. M39029 socket to M39029 socket cable assembly is built with M17/113-RG316, which is a flexible coax type. The Pasternack PE3M0407-12 flexible cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 socket to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. |
| 6 | ||
| PE3M0407-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 16, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 16, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: M17/113-RG316, RF Cable Type: Coax, RF Cable Specification: MIL-DTL-17, RF Cable Impedance : 50 Ohm. MIL Size 16 Contact Socket to MIL Size 16 Contact Socket Cable, D38999 Series I, III, IV, 60 Inch Length Using M17/113-RG316. The PE3M0407-60 from Pasternack is a D38999 contact cable assembly that is built with a size 16 M39029 socket contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 700 MHz. The PE3M0407-60 RF cable has a FEP jacket of 0.980-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0407-60 in-series RF cable has 0.5 inches of repeated minimum bend radius. M39029 socket to M39029 socket cable assembly is built with M17/113-RG316, which is a flexible coax type. The Pasternack PE3M0407-60 flexible cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 socket to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. |
| 6 | ||
| PE3M0401-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMZ, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: M17/119-RG174-0XDS2, RF Cable Type: Coax, RF Cable Specification: MIL-DTL-17, RF Cable Impedance : 50 Ohm. BMZ Size 8 Contact Socket to BMZ Size 8 Contact Socket Cable 48 Inch Length Using M17/119-RG174-0XDS2 Coax with HeatShrink, LF Solder. The PE3M0401-48 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ socket contact connection on one end and a BMZ socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to BMZ cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 1 GHz. The PE3M0401-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 85 degrees C. Our BMZ socket to BMZ socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has steel as the cable’s inner conducting material and PE dielectric type. BMZ socket to BMZ socket cable assembly is built with M17/119-RG174-0XDS2, which is a flexible coax type. The Pasternack PE3M0401-48 flexible cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to BMZ RF cable are available on our downloadable PDF datasheet. BMZ socket to BMZ socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to BMZ RF cable assembly as per your requirements. |
| 5 | ||
| PE20S0040 | Pasternack Enterprises | Key Specifications, Connector Series In: N, Connector Gender In: Female, Connector Series Out: N, Connector Gender Out: Female, Minimum Frequency : 600 MHz, Maximum Frequency: 6 GHz, Ports: 2, Impedance: 50 Ohms, Maximum Input Power: 400 Watts. 2 Way Broadband Combiner N Female Input and Output from 600 MHz to 6 GHz rated 400 Watts. Pasternack’s PE20S0040 is a passive 2-way broadband RF combiner that operates at a minimum frequency of 600 MHz and a maximum frequency of 6 GHz. Our combiner has a maximum input-output VSWR of 1.4:1 along with a maximum power handling capacity of 400 Watts. This 2-way RF power combiner is stocked to be readily available for same business day shipment. Our combiner has type N female input and type N female output connectors. This PE20S0040 2-way RF power combiner from Pasternack is suitable for applications such as RF test and measurement, laboratory testing, wireless communication systems, military and defense RF systems, broadcast systems, distributed antenna systems (non-low PIM applications), signal distribution networks, RF power combining systems and general-purpose RF integration. Our broadband RF combiner has a length of 5.51 inches, a width of 1.54 inches, and a weight of 0.55 lbs. Additional dimensions and specifications for this radio frequency combiner can be found on its downloadable PDF datasheet. The 2-way broadband RF combiner has a minimum isolation of 16 dB and a maximum insertion loss of 1.2 dB. This PE20S0040 broadband radio frequency power combiner from Pasternack has an impedance of 50 Ohms. Our combiner can operate at temperatures ranging from -25 to 75 degrees C. This Pasternack 2-way RF combiner will ship the same business day as purchased. Our broadband combiner is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF power combiner as per your requirements. |
| 2 | ||
| PE3W04040 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to N Female Cable Using RG188 Coax. PE3W04040 is a SMA male right angle to N female cable using RG188 coax. This Pasternack SMA male right angle to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04040 SMA male right angle to N female cable assembly is constructed with RG188 coax. | 0 | |||
| PE3MSA00404-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: JACK, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Halogen Free Bend Relief 3-Lug TRB Non-Insulated Bulkhead Jack with Blunt Cut for 78 Ohm TWCH-78-2, 60" Cable., Radio frequency assembly halogen free bend relief 3-Lug TRB non-insulated bulkhead jack with blunt cut for 78 Ohm TWCH-78-2, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Halogen free bend relief 3-Lug TRB non-insulated bulkhead jack with blunt cut for 78 Ohm TWCH-78-2, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00404-60 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00404-60 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00404-60 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this halogen free bend relief 3-Lug TRB non-insulated bulkhead jack with blunt cut for 78 Ohm TWCH-78-2, 60" cable. |
| 0 | ||
| PE3W04010/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Curry FAKRA Jack to SMB Plug Cable Using RG174 Coax with HeatShrink. PE3W04010/HS is a FAKRA jack to SMB plug cable using RG174 coax. This Pasternack FAKRA jack to SMB plug cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMB for connector 2. Our jack FAKRA to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04010/HS FAKRA jack to SMB plug cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W04076 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Cable Using RG214 Coax. PE3W04076 is a SMA male to SMA female cable using RG214 coax. This Pasternack SMA male to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04076 SMA male to SMA female cable assembly is constructed with RG214 coax. | 0 | |||
| PE3C0406/PH90-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MMCX Plug Right Angle to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-100 Coax with 90 Deg. Clock., Radio frequency assembly MMCX plug right angle to SMA male right angle low loss cable 36 inch length using LMR-100 coax with 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug right angle to SMA male right angle low loss cable 36 inch length using LMR-100 coax with 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle MMCX cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle MMCX to right angle SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C0406/PH90-36 can also be known as a low loss right angle MMCX male to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. MMCX male to SMA plug cable assembly PE3C0406/PH90-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to right angle SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency MMCX right angle plug to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0406/PH90-36 can also be used in the other direction and will be right angle SMA male to right angle MMCX plug cable assembly if the opposite connectivity is required. Low loss MMCX right angle male to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to SMA male right angle low loss cable 36 inch length using LMR-100 coax with 90 deg. clock. |
| 0 | ||
| PE3C10409-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated 4.3-10 Male to 4.3-10 Male Low Loss Cable 36 Inch Length Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to 4.3-10 male low loss cable 36 inch length using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated 4.3-10 male to 4.3-10 male low loss cable 36 inch length using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low loss a 4.3-10 to a 4.3-10 cable assembly has male gender on end 1 and male on end 2. PE3C10409-36 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10409-36 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. 4.3-10 plug to 4.3-10 plug cable assembly PE3C10409-36 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3FCA040-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC UPC to ST UPC, SM OS2, 2.0mm Plenum, Yellow - 10 meter. Pasternack’s PE3FCA040-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with simplex LC/UPC to ST/UPC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA040-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W04022/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using RG188 Coax with HeatShrink. PE3W04022/HS is a SMA male to SMA male cable using RG188 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04022/HS SMA male to SMA male cable assembly is constructed with RG188 coax. | 0 | |||
 TE Connectivity | CPF0402B10KE1 | TE Connectivity | CPF 0402 10K 0.1% 25PPM 1K RL Resistance Value: 10K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 10K Ω Thin Film Precision Resistor .1 % | Part Number: CPF0402B10KE1 | Internal Number: 7-1879208-3 | TE Connectivity RoHS : Compliant |
| 143,218 | |
| CPF0402B110KE | TE Connectivity | CPF0402 110K 0.1% 25PPM 5K RL Resistance Value: 110K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 110K Ω Thin Film Precision Resistor .1 % | Part Number: CPF0402B110KE | Internal Number: 9-1879061-8 | TE Connectivity RoHS : Compliant |
| 14,433 | ||
| CPF0402B47KE1 | TE Connectivity | CPF 0402 47K 0.1% 25PPM 1K RL Resistance Value: 47K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 47K Ω Thin Film Precision Resistor .1 % | Part Number: CPF0402B47KE1 | Internal Number: 8-1879208-9 | TE Connectivity RoHS : Compliant |
| 6,740 | ||
| CPF0402B13RE1 | TE Connectivity | CPF 0402 13R 0.1% 25PPM 1K RL Resistance Value: 13 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 13 Ω Thin Film Precision Resistor .1 % | Part Number: CPF0402B13RE1 | Internal Number: 1879208-4 | TE Connectivity RoHS : Compliant |
| 1,965 | ||
CPF-A-0402B1K82E | TE Connectivity | CPF A 0402 1K82 0.1% 25PPM 5K RL Resistance Value: 1.82K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 1.82K Ω Thin Film Precision Resistor .1 % | Part Number: CPF-A-0402B1K82E | Internal Number: 1-2176236-2 | TE Connectivity RoHS : Compliant |
| 1,374 | ||
| CPF0402B536RE1 | TE Connectivity | CPF 0402 536R 0.1% 25PPM 1K RL Resistance Value: 536 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 536 Ω Thin Film Precision Resistor .1 % | Part Number: CPF0402B536RE1 | Internal Number: 2-1879214-2 | TE Connectivity RoHS : Compliant |
| 1,011 | ||
| CPF0402B130RE1 | TE Connectivity | CPF 0402 130R 0.1% 25PPM 1K RL Resistance Value: 130 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 130 Ω Thin Film Precision Resistor .1 % | Part Number: CPF0402B130RE1 | Internal Number: 2-1879208-8 | TE Connectivity RoHS : Compliant |
| 866 | ||
| T4171010404-001 | TE Connectivity | M12,REAR MOUNTING,MALE,B,4P,0.2M WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 4 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Plug 4 18 | M12 Panel Mount Wire | Part Number: T4171010404-001 | Internal Number: T4171010404-001 | TE Connectivity RoHS : Compliant |
| 275 | ||
| CPF0402B374RE1 | TE Connectivity | CPF 0402 374R 0.1% 25PPM 1K RL Resistance Value: 374 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 374 Ω Thin Film Precision Resistor .1 % | Part Number: CPF0402B374RE1 | Internal Number: 1879214-7 | TE Connectivity RoHS : Compliant |
| 240 | ||
| 6PCR-04-006 | TE Connectivity | 6PCR-04-006=6PCR ASSEMBLY Number of Positions: 4 Barrier Strip Style: Tri-Barrier Bottom Termination Type: Printed Circuit Pin Connector System: Wire-to-Board Centerline (Pitch): .375 in Barrier Strip | 4 Tri-Barrier Printed Circuit Pin Wire-to-Board | Part Number: 6PCR-04-006 | Internal Number: 7-1437651-7 | .375" | TE Connectivity RoHS : Compliant |
| 205 | ||
| CPF0402B37R4E1 | TE Connectivity | CPF 0402 37R4 0.1% 25PPM 1K RL Resistance Value: 37.4 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 37.4 Ω Thin Film Precision Resistor .1 % | Part Number: CPF0402B37R4E1 | Internal Number: 1-1879213-6 | TE Connectivity RoHS : Compliant |
| 177 | ||
| 1604040-1 | TE Connectivity | CONTACT,175A/180A,#4 AWG,L/P Contact Mating Area Plating Material: Silver (Ag) Contact Type: Tab Wire Contact Termination Area Plating Material: Silver Wire Size: 4 AWG Operating Voltage: 600 VAC Silver (Ag) Tab 4 AWG | Connector Contact | Part Number: 1604040-1 | Internal Number: 1604040-1 | TE Connectivity RoHS : Compliant |
| 129 | ||
| T2040011040-000 | TE Connectivity | DMM-4.0 Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Wire Contact Termination Area Plating Material: Gold Wire Size: 12 AWG Wire Size: 4 mm² Gold (Au) Pin 12 AWG | Connector Contact | Part Number: T2040011040-000 | Internal Number: T2040011040-000 | TE Connectivity RoHS : Compliant |
| 13 | ||
| T2040001040-000 | TE Connectivity | CMM-4.0 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Pin Wire Contact Termination Area Plating Material: Silver Wire Size: 12 AWG Wire Size: 4 mm² Silver (Ag) Pin 12 AWG | Connector Contact | Part Number: T2040001040-000 | Internal Number: T2040001040-000 | TE Connectivity RoHS : Compliant |
| 5 | ||
| T2040012040-000 | TE Connectivity | DMF-4.0 Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Wire Size: 12 AWG Wire Size: 4 mm² Gold (Au) Socket 12 AWG | Connector Contact | Part Number: T2040012040-000 | Internal Number: T2040012040-000 | TE Connectivity RoHS : Compliant |
| 2 | ||
 Teledyne HiRel | 5962-9160401MEA | Teledyne HiRel | MULTIPLEXER, QUAD 2-INPUT, 3-STATE OUTPUTS RoHS : Not Compliant | 0 | ||
M38510/30402B2A | Teledyne HiRel | AND-OR-INVERT GATE RoHS : Not Compliant | 0 | |||
M38510/30402BCA | Teledyne HiRel | AND-OR-INVERT GATE RoHS : Not Compliant | 0 | |||
| 5962-9160401M2A | Teledyne HiRel | MULTIPLEXER, QUAD 2-INPUT, 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
5962-9160401MFA | Teledyne HiRel | MULTIPLEXER, QUAD 2-INPUT, 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| CD4040BMJ/883 | Teledyne HiRel | 12-STAGE RIPPLE CARRY BINARY COUNTERS | 0 | |||
| 5962-8870401EA | Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
M38510/30402BBA | Teledyne HiRel | AND-OR-INVERT GATE RoHS : Not Compliant | 0 | |||
| 5962-88704012A | Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| M38510/00401BBA | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| M38510/00401BCA | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| M38510/30402BAA | Teledyne HiRel | AND-OR-INVERT GATE RoHS : Not Compliant | 0 | |||
| M38510/00401BDA | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| M38510/30402BDA | Teledyne HiRel | AND-OR-INVERT GATE RoHS : Not Compliant | 0 | |||
| M38510/00401BAA | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | AGCR0402-PK-6040FT | VENKEL LTD | Auto Grade Resistor;0402;1/16W;�100PPM;604R;�1% RoHS : Compliant | 20,000 | ||
| UPTF0402-16W-P-6040DT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;604R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-E-1040AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�25PPM;104R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-6040UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;604R;�0.01% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-6040CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;604R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-6040CT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;604R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-6040FT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;604R;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-1040DT | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;104R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-1040FT | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;104R;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-6040BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;604R;�0.1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-6040BT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;604R;�0.1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-6040CT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;604R;�0.25% RoHS : Compliant | 0 | |||
| CR0402-16W-6040FT | VENKEL LTD | Chip Resistor;0402;1/16W;604R;�1% RoHS : Compliant | 0 | |||
| AGCR0402-RK-6040DT | VENKEL LTD | Auto Grade Resistor;0402;1/8W;�100PPM;604R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-6040CT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;604R;�0.25% RoHS : Compliant | 0 | |||
 Win Source Electronics | PGB1010402KR | Littelfuse Inc | TVS DIODE 12VWM 250VC 0402 RoHS : Compliant |
| 608,400 | |
| RC0402FR-0768KL | YAGEO Corporation | RES 68K OHM 1% 1/16W 0402 / 68 kOhms ±1% 0.063W, 1/16W Chip Resistor 0402 (1005 Metric) Moisture Resistant Thick Film RoHS : Compliant |
| 403,000 | ||
| RC0402FR-07150RL | YAGEO Corporation | RES SMD 150 OHM 1% 1/16W 0402 RoHS : Compliant |
| 372,459 | ||
| BQ24040DSQR/BQ24040DSQT | Texas Instruments |
| 55,230 | |||
| AC0402JR-0722RL | YAGEO Corporation | RES SMD 22 OHM 5% 1/16W 0402 RoHS : Compliant |
| 42,000 | ||
LM4040C10IDBZRG4 | Texas Instruments | PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE RoHS : Compliant |
| 33,570 | ||
| SDR0403-2R2ML | Bourns Inc | FIXED IND 2.2UH 2.6A 47 MOHM SMD RoHS : Compliant |
| 26,981 | ||
S25FL040A0LMFI001 | Spansion | 4 Megabit CMOS 3.0 Volt Flash Memory with 50MHz SPI (Serial Peripheral Interface) Bus and Small Sector for Boot and Parameter Storage RoHS : Compliant |
| 11,921 | ||
| RC0402JR-07300KL | YAGEO Corporation | RES SMD 300K OHM 5% 1/16W 0402 RoHS : Compliant |
| 10,000 | ||
AD8040ARUZ | Analog Devices Inc | Low Power, High Speed Rail-to-Rail Input/Output Amplifier | IC OPAMP GP 4 CIRCUIT 14TSSOP RoHS : Compliant |
| 6,307 | ||
LM4040A25IDBZTG4 | Texas Instruments | IC VREF SHUNT 2.5V SOT23-3 RoHS : Compliant |
| 5,660 | ||
| LM4040C20IDBZR | Texas Instruments | V-Ref Precision 2.048V 15mA Automotive 3-Pin SOT-23 T/R / IC VREF SHUNT 2.048V SOT23 RoHS : Compliant |
| 3,409 | ||
R1LV0408DSP-5SI | Renesas Electronics Corporation | 4M SRAM (512-kword × 8-bit) RoHS : Compliant |
| 2,900 | ||
PTH04040WAZ | Texas Instruments | DC DC CONVERTER 0.8-2.5V 60A RoHS : Compliant |
| 1,036 | ||
| PTH04040WAD | Texas Instruments | DC DC CONVERTER 0.8-2.5V 60A RoHS : Compliant |
| 252 | ||
 Wuhan P&S | MMA02040C3909FB300 | Vishay Intertechnologies | Professional Thin Film MELF Resistors RoHS : Compliant |
| 316,120 | |
| MMA02040C4993FB300 | Vishay Intertechnologies | Professional Thin Film MELF Resistors RoHS : Compliant |
| 79,800 | ||
| MMA02040C2200FB300 | Vishay Intertechnologies | Professional Thin Film MELF Resistors RoHS : Compliant |
| 63,000 | ||
| VS-30BQ040-M3/9AT | Vishay Intertechnologies | 3A, 40V, High Performance Schottky Rectifier RoHS : Compliant |
| 31,500 | ||
| CRCW0402324RFKEDC | Vishay Intertechnologies | Chip Resistors RoHS : Compliant |
| 30,000 | ||
| CRCW0402150RFKEDHP | Vishay Intertechnologies | CRCW0402-HP 100 150R 1% ET7 E3 RoHS : Compliant |
| 30,000 | ||
| T51D227M6R3C0040 | Vishay Intertechnologies | Surface-Mount Chip Capacitors RoHS : Compliant |
| 25,000 | ||
| T51D337M004C0040 | Vishay Intertechnologies | Surface-Mount Chip Capacitors RoHS : Compliant |
| 24,000 | ||
| CRCW040224R0FKED | Vishay Intertechnologies | Standard Thick Film Chip Resistors RoHS : Compliant |
| 20,000 | ||
| IHLP4040DZEK100M1A | Vishay Intertechnologies | IHLP-4040DZ-1A 10 20% EK E3 RoHS : Compliant |
| 16,000 | ||
| MMA02040D1004BB300 | Vishay Intertechnologies | Precision Thin Film MELF Resistors1 M�� ��0.1% 0.25W RoHS : Compliant |
| 15,000 | ||
| CRCW04021K50FKED | Vishay Intertechnologies | Standard Thick Film Chip Resistors RoHS : Compliant |
| 10,000 | ||
| CMA02040X1001GB300 | Vishay Intertechnologies | Load Carbon Film MINI-MELF Resistors RoHS : Compliant |
| 9,000 | ||
| MBRS2040LT3G | onsemi | Surface Mount Schottky Barrier Power Rectifier RoHS : Compliant |
| 5,000 | ||
| MMA02040D5103FB300 | Vishay Intertechnologies | Professional Thin Film MELF Resistors 510 k�� ��1% 0.25W RoHS : Compliant |
| 3,000 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Portuguese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Polish
Vietnamese
Indian
Mexican
British
New Zealand