General Description
The +3V MAX5251 combines four low-power, voltage output, 10-bit digital-to-analog converters (DACs) and four precision output amplifiers in a space-saving, 20-pin package. In addition to the four voltage outputs, each amplifier’s negative input is also available to the user. This facilitates specific gain configurations, remote sensing, and high output drive capacity, making the MAX5251 ideal for industrial-process-control applications. Other features include software shutdown, hardware shutdown lockout, an active-low reset that clears all registers and DACs to zero, a user-programmable logic output, and a serial-data output.
Each DAC has a double-buffered input organized as an input register followed by a DAC register. A 16-bit serial word loads data into each input/DAC register. The 3-wire serial interface is compatible with SPI™/QSPI™ and Microwire™. It allows the input and DAC registers to be updated independently or simultaneously with a single software command. All logic inputs are TTL/CMOS logic compatible.

Features
♦ Four 10-Bit DACs with Configurable Output Amplifiers
♦ +3.0V to +3.6V Single-Supply Operation
♦ Low Supply Current: 0.8mA Normal Operation 3µA Shutdown Mode
♦ Available in 20-Pin SSOP
♦ Power-On Reset Clears all Registers and DACs to Zero
♦ SPI/QSPI and Microwire Compatible
♦ Simultaneous or Independent Control of DACs via 3-Wire Serial Interface
♦ User-Programmable Digital Output
♦ Schmitt-Trigger Digital Inputs for Direct Optocoupler Interface
♦ 12-Bit Upgrade Available: MAX5253

Applications
  Digital Offset and Gain Adjustment
  Microprocessor-Controlled Systems
  Industrial Process Controls
  Automatic Test Equipment
  Remote Industrial Controls
  Motion Control