Description
The HIP0060 is a 5V logic controlled Quad Low Side Power Driver. The outputs are individually protected for over-current (OC), over-temperature (OT) and over-voltage (OV). If an OC short circuit in the output load is sensed (IS) in one output power driver, that output current will be independently limited while the other outputs remain in operation. Over-current is limited by direct gate feedback. Over-voltage protection is provided by a drain-to-gate zener diode that clamps inductive switching pulses.

Features
• Quad NDMOS Output Drivers in a High Voltage Power BiMOS Process
• Over-Stress Protection - Each Output
    - Over-Current Limiting . . . . . . . . . . . . . . . . . .1.5A Min
    - Internal Zener Drain-to-Gate Over-Voltage Clamp Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50V Typ
    - Thermal Shutdown Protection
    - Open-Load Detection
• Low Quiescent Current . . . . . . . . . . . . . . . . 10mA Max
• Serial Diagnostic Link with SPI Bus
• Diagnostic Interrupt Fault Flag
• 5V CMOS Logic Input Control
• Common Reset for Fault Bits and Output Drivers
• Ambient Operating
    Temperature Range. . . . . . . . . . . . . . . . -40°C to 125°C

Applications
• Automotive and Industrial Systems
• Fuel Injection Drivers
• Solenoids, Relays and Lamp Drivers
• Logic and µP Controlled Drivers
• Robotic Controls