General Description
The HT9480 is a high performance pager controller. The built-in single cycle instructions (16-bit wide) and two-stage pipeline architecture of the HT9480 account for its high performance. The controller contains a full function pager decoder (POCSAG code) at 512, 1200, or 2400 bits per second data rate and an LCD display driver with a 35x4 dot output.

Features
• Operating voltage: 2.4V~3.3V
• Low power crystal oscillator control
    - 512, 1200, or 2400 bps data rate operation
• Decodes CCIR Radio-paging Code No.1 (POCSAG Code)
• 2-bit random and optional 4-bit burst error correction
• Improved synchronization algorithm
• Supports up to 6 independently programmable user addresses and 6 user frames
• Three RF power on timing control pins
• Single crystal for all available baud rate (76.8kHz crystal)
• Battery low indication (external detector)
• Battery fail interrupt and data ready interrupt
• 8Kx16 program ROM
• 416x8 data RAM
• 35x4 LCD display
• 7 input lines and 10 bidirectional I/O lines
• 8-bit programmable timer for RTC interrupt
• 8-bit programmable timer/event counter and overflow interrupt
• 8-bit programmable tone generator with buzzer output
• Watchdog Timer
• HALT function and wake-up feature reduce power consumption
• 63 powerful instructions, most instructions in one machine cycle
• Eight-level subroutine nesting
• Table read instruction
• Inverted or non-inverted input signal selection for decoder input
• 80-pin LQFP(12x12) package