GENERAL DESCRIPTION
The AD9601 is a 10-bit monolithic sampling analog-to-digital converter optimized for high performance, low power, and ease of use. The product operates at up to a 250 MSPS conversion rate and is optimized for outstanding dynamic performance in wideband carrier and broadband systems. All necessary functions, including a track-and-hold (T/H) and voltage reference, are included on the chip to provide a complete signal conversion solution.

FEATURES
   SNR = 59.4 dBFS @ fIN up to 70 MHz @ 250 MSPS
   ENOB of 9.7 @ fIN up to 70 MHz @ 250 MSPS (−1.0 dBFS)
   SFDR = 81 dBc @ fIN up to 70 MHz @ 250 MSPS (−1.0 dBFS)
   Excellent linearity
      DNL = 0.2 LSB typical
      INL = 0.2 LSB typical
   CMOS outputs
      Single data port at up to 250 MHz
      Demultiplexed dual port at up to 2 × 125 MHz
   700 MHz full power analog bandwidth
   On-chip reference, no external decoupling required
   Integrated input buffer and track-and-hold
   Low power dissipation
      274 mW @ 200 MSPS
      322 mW @ 250 MSPS
   Programmable input voltage range
      1.0 V to 1.5 V, 1.25 V nominal
   1.8 V analog and digital supply operation
   Selectable output data format (offset binary, twos
      complement, Gray code)
   Clock duty cycle stabilizer
   Integrated data capture clock

APPLICATIONS
   Wireless and wired broadband communications
   Cable reverse path
   Communications test equipment
   Radar and satellite subsystems
   Power amplifier linearization