■Features
1. Low-profile and light weight
    Weight: Reduced approximately 30% Board footprint: Reduced approximately 15% (As compared with Hirose Electrics FH26 Series connectors (51 positions)
2. Easy solderability on the PC board
    The soldering leads are on 0.6 mm pitch, exiting on front and back of the connector.
3. Conducive traces on the PCB can run under the connector
    No exposed contacts on the bottom of the connector.
4. Easy FPC insertion and reliable electrical connection
    Proven Flip Lock actuator allows easy insertion of FPC and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection.
5. FPC position hold
    Tabs on each side of the FPC assure correct placement and hold in the connector prior to closing of the actuator.
6. Accepts standard FPC thickness
    0.2mm thick standard Flexible Printed Circuit (FPC) can be used. This is the only ultra-low profile ZIF connector using standard FPC.
7. Board placement with automatic equipment
    Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement.
    Standard reel packaging contains 5,000 connectors.
8. Halogen-free * (FH36W Series)
    *As defined by IEC61249-2-21
    Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum