Overview

The LC75884E and LC75884W are 1/4 duty LCD display drivers that can directly drive up to 220 segments and can control up to four general-purpose output ports. These products also incorporate a key scan circuit that accepts input from up to 30 keys to reduce printed circuit board wiring.

Features

• Key input function for up to 30 keys (A key scan is performed only when a key is pressed.)

• 1/4duty - 1/2bias and 1/4duty - 1/3bias drive schemes can be controlled from serial data (up to 220 segments).

• Sleep mode and all segments off functions that are controlled from serial data.

• Segment output port/general-purpose output port function switching that is controlled from serial data.

• Serial data I/O supports CCB format communication with the system controller.

• Direct display of display data without the use of a decoder provides high generality.

• Independent VLCD for the LCD driver block (VLCD can be set to in the range VDD-0.5 to 6.0 volts.)

• Provision of an on-chip voltage-detection type reset circuit prevents incorrect displays.

• RES pin provided for forcibly initializing the IC internal circuits.

• RC oscillator circuit.