The BA5415A and BA5416 are dual power amplifier ICs that operate off a 9V to 15V supply. When driving a 4Ω load off a 9V supply, the BA5415A does not require a heatsink. The BA5416 uses a lost-cost package. The basic characteris tics (total harmonic distortion etc.) of the amplifiers are excellent, and both ICs include a standby switch function.

Features

1) High output.

  POUT= 5.4W (VCC= 12V, RL= 3Ωand THD = 10%)

  POUT= 2.5W (VCC= 9V, RL= 4Ωand THD = 10%)

2) Excellent audio quality.

  THD = 0.1% (f = 1kHz, PO= 0.5W)

  VNO= 0.3mVrms(Rg = 10kΩ)

  RR = 60dB (fRR= 100Hz)

3) Wide operating power suppy voltage range.

    VCC= 5.0V to 18.0V (BA5416: 5.0V to 15.0V)

4) Switching noise (“pop” noise) generated when the power is switched on and off is small.

5) Ripple mixing when motor starts has been prevented.

6) Built-in thermal shutout.

7) Built-in standby switch. Output is not influenced by the standby pin voltage.

8) “On” mute time does not depend on VCC.

9) Soft clipping.

10) Heatsink not required (for BA5415A, with VCC= 9V and RL
4Ω).

Applications

Radio cassette players.