The SN8P2602B is a RISC-like high performance and low power consumption 8-bit micro-controller. One clock per instruction cycle (1T) architecture will provide up to 16MIPS computation power. Also, the high EFT (Electrical Fast Transients) protection capability let this device is suitable for high noisy industrial application. The device is designed with the excellent IC structure including the program memory up to 1K-word OTP ROM, data memory of 48-bytes RAM, Two 8-bit timer (T0, TC0), a watchdog timer, three interrupt sources (T0, TC0, INT0), and 4-level stack buffers. Besides, user can choose desired oscillator configuration for the controller. There are four external oscillator configurations to select for generating system clock, including High/Low speed crystal, ceramic resonator or cost-saving RC. This device also includes an internal RC oscillator for slow mode controlled by programming.

FEATURES
♦ Memory configuration
   OTP ROM size: 1K * 16 bits.
   RAM size: 48 * 8 bits.
   Four levels stack buffer
♦ I/O pin configuration
   Bi-directional: P0, P1, P5.
   Input only: P1.5.
   Programmable open-drain: P1.0.
   Wakeup: P0, P1 level change trigger
   Pull-up resisters: P0, P1, P5.
   External Interrupt trigger edge:
   P0.0 controlled by PEDGE register.
♦ 3-Level LVD.
   Reset system and power monitor.
♦ Powerful instructions
   One clocks per instruction cycle (1T)
   Most of instructions are one cycle only.
   All ROM area JMP instruction.
   All ROM area CALL address instruction.
   All ROM area lookup table function (MOVC)
♦ Three interrupt sources
   One internal interrupts: T0, TC0.
   One external interrupts: INT0.
♦ Two 8-bit Timer/Counter
   T0: Basic Timer.
   TC0: Auto-reload timer/Counter/Buzzer output
♦ On chip watchdog timer and clock source is internal
   low clock RC type (16KHz @3V, 32KHz @5V).
♦ Dual system clocks
   External high clock: RC type up to 10 MHz
   External high clock: Crystal type up to 16 MHz
   Internal low clock: RC type 16KHz(3V), 32KHz(5V)
♦ Operating modes
   Normal mode: Both high and low clock active
   Slow mode: Low clock only
   Sleep mode: Both high and low clock stop
   Green mode: Periodical wakeup by T0 Timer
♦ Package (Chip form support)
   PDIP 18 pins
   SOP 18 pins
   SSOP20 pins