General Description
The MAX4747–MAX4750 low-voltage, quad single-pole single-throw (SPST)/dual single-pole/double-throw (SPDT) analog switches operate from a single +2V to +11V supply and handle rail-to-rail analog signals. These switches exhibit low leakage current (0.1nA) and consume less than 0.5nW (typ) of quiescent power, making them ideal for battery-powered applications.
When powered from a +3V supply, these switches feature 50Ω (max) on-resistance (RON), with 3.5Ω (max) matching between channels and 9Ω (max) flatness over the specified signal range.
The MAX4747 has four normally open (NO) switches, the MAX4748 has four normally closed (NC) switches, and the MAX4749 has two NO and two NC switches. The MAX4750 has two SPDT switches. These switches are available in 14-pin TSSOP, 16-pin thin QFN (4mm x 4mm), and 16-bump chip-scale packages (UCSP™). This tiny chip-scale package occupies a 2mm ✕ 2mm area and significantly reduces the required PC board area.

Features
♦ 2mm ✕ 2mm UCSP
♦ Guaranteed On-Resistance (RON)
   25Ω (max) at +5V
   50Ω (max) at +3V
♦ On-Resistance Matching
   3Ω (max) at +5V
   3.5Ω (max) at +3V
♦ Guaranteed < 0.1nA Leakage Current at TA = +25°C
♦ Single-Supply Operation from +2.0V to +11V
♦ TTL/CMOS-Logic Compatible
♦ -84dB Crosstalk (1MHz)
♦ -72dB Off-Isolation (1MHz)
♦ Low Power Consumption: 0.5nW (typ)
♦ Rail-to-Rail Signal Handling

Applications
   Battery-Powered Systems
   Audio/Video-Signal Routing
   Low-Voltage Data-Acquisition Systems
   Cell Phones
   Communications Circuits
   Glucose Meters
   PDAs