Features
◼ High-end suspension bootstrap power supply design, withstand
voltage up to 600V
◼ Integrated internal bootstrap diode,fewer peripheral devices
◼ Maximum frequency support 500KHZ
◼ Low-side VDD voltage range 3.3 V-5V
◼ Low-side VCC voltage range 10V-20V
◼ Output current capability IO+/- 2A/2A
◼ Built-in dead zone control circuit
◼ Comes with locking function, completely eliminate the upper and
lower tube output is turned on at the same time
◼ HIN input channel is active high to control the high-side HO output
◼ LIN input channel is active high to control the low-side LO output
◼ Quiescent current less than 50uA
◼ Package form: SOW16 and SOP16

Description
EG2113D is a cost-effective high-power MOS transistor, IGBT transistor Gate Drive dedicated chip,
integrated logic signal input processing circuit, dead zone control circuit, latch circuit, level displacement
circuit, pulse filter circuit, bootstrap diode and output drive circuit, dedicated to brushless motor controller
drive circuit.
EG2113D high-end operating voltage up to 600V, low-end VCC supply voltage range is wide 10V ~
20V, static power consumption is less than 50uA.The chip has a latching function to prevent the output
power tube is turned on at the same time,the input channel HIN and LIN built - in a 200k pull-down
resistor, when the input floating so that the upper and lower power MOS transistor is turned off, the
output current capability IO+/ - 2A/2A, using SOP16 and SOW16 package.

Application Areas
◼ Sine wave inverter
◼ Variable frequency
pump controller
◼ Square wave inverter
◼ Electric vehicle controller
◼ Brushless motor driver
◼ High voltage Class-D
power amplifier