|
1 Features
• Hybrid Power Boost Mode to power up system
from adapter and battery together
– Ultra-fast transient response of 100μs to enter
Hybrid Power Boost Mode
– Ultra-fast ICHG recovery within 60μs after
exiting Hybrid Power Boost Mode
• Battery Only Boost Mode to support larger system
transients and extend battery run time
• Peak power two-level input current limit to
maximize the power from adapter and minimize
battery discharge
• Charge 1- to 4-cell battery pack from 4.5V to 24V
adapter
• High accuracy power and current monitoring for
CPU throttling
– Comprehensive PROCHOT profile
– ± 2% Current monitor accuracy
– ± 5% System Power Monitor Accuracy (PMON)
• Automatic NMOS power source selection from
adapter or battery
– ACFET fast turn on in 100μs when exiting learn
mode from battery removal
• Programmable input current, charge voltage,
charge and discharge current limit
– ±0.4% Charge voltage (16mV/step)
– ±2% Input current (64mA/step)
– ±2% Charge current (64mA/step)
– ±2% Discharge current (512mA/step)
• High integration
– Battery LEARN function
– Battery present monitor
– Boost Mode indicator
– Loop compensation
– BTST Diode
• Enhanced safety features for overvoltage
protection, overcurrent protection, battery, inductor,
and MOSFET short-circuit protection
• Switching frequency: 300kHz, 400kHz, 600kHz,
and 800kHz
• Realtime system control on ILIM pin to limit charge
and discharge current
• 0.65mA Adapter standby quiescent current for
Energy Star
• Input current limit (IINDPM) up to 21.12A/10.56A
with 5mΩ/10mΩ sense resistor
• VSYSMIN regulation up to 16.128V+2.3V during
battery only boost mode
2 Applications
• Standard notebook PC and tablet (multimedia) PC
• Industrial and medical and healthcare equipment
• Personal electronics and portable electronics
• System with battery backup unit (BBU)
3 Description
The BQ24810 device is a high-efficiency, synchronous
buck multi-chemistry battery charger supporting 1-, 2-,
3-, or 4-series Li+ cells, or other battery chemistries
up to 19.2V.
Through SMBus, a host microcontroller programs
charge current, charge voltage, input current limit and
discharge current limit with high regulation accuracies.
Additionally, the BQ24810 supports a two level input
current limit (Peak Power mode) to fully utilize the
adapter capabilities and reduce battery discharge.
The BQ24810 provides adapter current (IADP),
battery discharge current (IDCHG), and system power
(PMON) signals to the host microcontroller and
outputs the PROCHOT signal to throttle back CPU
speed when needed.
The BQ24810 supports hybrid power boost mode to
boost the battery voltage to supplement the adapter
when system power demand is temporarily higher
than the adapter is able to provide. When the adapter
is not present, the BQ24810 supports battery only
boost mode to boost the battery voltage above the
minimum system operating voltage, providing more
headroom to support system transients.
|