FEATURES
2· Single +3.3V Supply
· High SNR: 61.7dBFS at fIN = 5MHz
· Total Power Dissipation:
Internal Reference: 366mW
External Reference: 330mW
· Internal or External Reference
· Low DNL: ±0.1LSB
· Flexible Input Range: 1.5V PP to 2VPP
· TQFP-64 Package

APPLICATIONS
· Communications IF Processing
· Communications Base Stations
· Test Equipment
· Medical Imaging
· Video Digitizing
· CCD Digitizing

DESCRIPTION
The ADS5237 is a dual, high-speed, high dynamic
range, 10-bit, pipelined analog-to-digital converter
(ADC). This device includes a high-bandwidth
sample-and-hold amplifier that gives excellent spurious performance up to and beyond the Nyquist
rate. The differential nature of the sample-and-hold
amplifier and ADC circuitry minimizes even-order
harmonics and gives excellent common-mode noise
immunity.
The ADS5237 provides for setting the full-scale range
of the converter without any external reference
circuitry. The internal reference can be disabled, allowing low-drive, external references to be used for
improved tracking in multichannel systems.
The ADS5237 provides an over-range indicator flag
to indicate an input signal that exceeds the full-scale
input range of the converter. This flag can be used to
reduce the gain of front-end gain control circuitry.
There is also an output enable pin to allow for
multiplexing and testing on a printed circuit board
(PCB).
The ADS5237 employs digital error correction
techniques to provide excellent differential linearity for
demanding imaging applications. The ADS5237 is
available in a TQFP-64 package.