1FEATURES
· Controlled Baseline
– One Assembly Site
– One Test Site
– One Fabrication Site
· Extended Temperature Performance of –55°C
to 125°C
· Enhanced Diminishing Manufacturing Sources
(DMS) Support
· Enhanced Product-Change Notification
· Qualification Pedigree (1)
· Wide Operating Voltage Range of 2 V to 6 V
· Outputs Can Drive up to 10 LSTTL Loads
· Low Power Consumption, 80 mA Max ICC
· Typical tpd = 15 ns
· ±4 mA Output Drive at 5 V
· Low Input Current of 1 mA Max

DESCRIPTION/ORDERING INFORMATION
The SN74HC74 device contains two independent D-type positive edge triggered flip-flops. A low level at the
preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When
PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements are transferred
to the outputs on the positive going edge of the clock (CLK) pulse. Clock triggering occurs at a voltage level and
is not directly related to the rise time of CLK. Following the hold time interval, data at the D input can be changed
without affecting the levels at the outputs.