FEATURES
· Member of the Texas Instruments Widebus™
Family
· Bus Hold on Data Inputs Eliminates the Need
for External Pullup/Pulldown Resistors
· Latch-Up Performance Exceeds 250 mA Per
JESD 17
· ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)

DESCRIPTION/ORDERING INFORMATION
This 1-bit to 4-bit address driver is designed for
1.65-V to 3.6-V VCC operation.
The SN74ALVCH16344 is used in applications in
which four separate memory locations must be
addressed by a single address.
To ensure the high-impedance state during power up
or power down, OE should be tied to VCC through a
pullup resistor; the minimum value of the resistor is
determined by the current-sinking capability of the
driver.
Active bus-hold circuitry holds unused or undriven
inputs at a valid logic state. Use of pullup or pulldown
resistors with the bus-hold circuitry is not
recommended.