Output Ports Have Equivalent 25-W Series
Resistors, So No External Resistors Are
Required
State-of-the-Art EPIC-IIBE BiCMOS Design
Significantly Reduces Power Dissipation
Flow-Through Architecture Optimizes
PCB Layout
Latch-Up Performance Exceeds 500 mA
Per JEDEC Standard JESD-17
Typical VOLP (Output Ground Bounce) < 1 V
at VCC = 5 V, TA = 25°C
Package Options Include Plastic
Small-Outline (DW) Package, Ceramic
Chip Carriers (FK), and Plastic (NT) and
Ceramic (JT) DIPs

description
These 10-bit buffers or bus drivers provide a
high-performance bus interface for wide data
paths or buses carrying parity.
The 3-state control gate is a 2-input AND gate with
active-low inputs so that if either output-enable
(OE1 or OE2) input is high, all ten outputs are in
the high-impedance state. The ’ABT2827 provide
true data at their outputs.
To ensure the high-impedance state during power
up or power down, OE should be tied to VCC
through a pullup resistor; the minimum value of
the resistor is determined by the current-sinking
capability of the driver.
The outputs, which are designed to source or sink
up to 12 mA, include equivalent 25-W series
resistors to reduce overshoot and undershoot.
The SN54ABT2827 is characterized for operation over the full military temperature range of –55°C to 125°C.
The SN74ABT2827 is characterized for operation from –40°C to 85°C.