1FEATURES
2• (VS = ±15V, TA = 25°C, Typical Values.)
• Tiny 5-pin SOT-23 Package Saves Space
• Greater than Rail-to-Rail Input CMVR −15.3V to
15.3V
• Rail-to-Rail Output Swing −14.84V to 14.86V
• Supply Current 0.7 mA
• Gain Bandwidth 4.6 MHz
• Slew Rate 1.9 V/μs
• Wide Supply Range 2.7V to 32V
• High Power Supply Rejection Ratio 106 dB
• High Common Mode Rejection Ratio 115 dB
• Excellent Gain 106 dB
• Temperature Range −40°C to 125°C
• Tested at −40°C, 125°C and 25°C at 2.7V, ±5V
and ±15V

APPLICATIONS
• Automotive
• Industrial Robotics
• Sensor Output Buffers
• Multiple Voltage Power Supplies
• Reverse Biasing of Photodiodes
• Low Current Optocouplers
• High Side Sensing
• Comparator
• Battery Chargers
• Test Point Output Buffers
• Below Ground Current Sensing

DESCRIPTION
The LM7341 is a rail-to-rail input and output amplifier
in a small SOT-23 package with a wide supply
voltage and temperature range. The LM7341 has a
4.6 MHz gain bandwidth and a 1.9 volt per
microsecond slew rate, and draws 0.75 mA of supply
current at no load.
The LM7341 is tested at −40°C, 125°C and 25°C with
modern automatic test equipment. Detailed
performance specifications at 2.7V, ±5V, and ±15V
and over a wide temperature range make the
LM7341 a good choice for automotive, industrial, and
other demanding applications.
Greater than rail-to-rail input common mode range
with a minimum 76 dB of common mode rejection at
±15V makes the LM7341 a good choice for both high
and low side sensing applications.
LM7341 performance is consistent over a wide voltage range, making the part useful for applications
where the supply voltage can change, such as
automotive electrical systems and battery powered
electronics.
The LM7341 uses a small SOT23-5 package, which
takes up little board space, and can be placed near
signal sources to reduce noise pickup.