|
Benefits and Features
New conformal coating helps protect sonic transducers in corrosive environments
Combined support structure causes less flow distortion than two separate sensors
Truly colocated gas analyzer and sonic anemometer measurements avoid flux loss due to sensor separation
Synchronized gas analyzer and sonic anemometer measurements avoid the need to correct for time lag
Low power consumption; suitable for solar power applications
Measurements are temperature compensated without active heat control
Low noise
Maximum output rate of 60 Hz with 20 Hz bandwidth
Angled windows shed water and are tolerant to window contamination
Field rugged
Field serviceable
Factory calibrated over wide range of CO,, H,0, pressure, and temperature in all combinations encountered in practice
Extensive set of diagnostic parameters
Fully compatible with Campbell Scientific dataloggers; field setup, configuration, and field zero and span can be accomplished directly from the datalogger
Sonic temperature determined from three acoustic paths; corrected for crosswind effects
Innovative signal processing and transducer wicks considerably improve performance of the anemometer during precipitation events
|