Features
ReDriver
y 10Gbps Serial Link with Linear Equalizer
y USB3.2 Gen 2x2
y Four 10Gbps Differential Signal Pairs
y Pin Mode Control for EQ/Flat Gain/Swing
y 100Ω Differential CML I/O’s
y Automatic Receiver Detect
y Single Supply Voltage: 3.3V
Plug-In Detector
y USB Type-C Specification 2.0
y Supports SOURCE (DFP)/DRP Modes
y Auto-Configure Ports Orientation through CC Detection
y Supports VCONN to Power Active Cables and Other Accessories
y Supports Detecting Debug Accessory Mode (DAM) as Source
(Rd /Rd Detection) if Configuring the Port as DFP
y Supports Detecting DAM as both Source & Sink (Rp/Rp detection)
if Configuring the Port as DRP
y DEBUG Pin to Enable SBU Isolation for Compliance Requirement
y Supports Over-Current Protection and Over-Voltage Protection for
VCONN
y Allow Both Pin Control and I2C Interface
y Integrated Power Switches, High-Precision Resistors and
Current Sources for CC Pins
y Provides Support for Default USB Power, 1.5A and 3A SOURCE
Modes w ith Pin C ontrol
y Output Indicator for Plug-In Detection
y Power Saving Mode
y 24V Tolerance on CC1, CC2 and VBUSDET
y Power Supply Range : 3.0V to 5.0V
y Temperature Range: 0oC to 70oC
y Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
y Halogen and Antimony Free. “Green” Device (Note 3)
y For automotive applications requiring specific change control
(i.e. parts qualified to AEC-Q100/101/104/200, PPAP capable,
and manufactured in IATF 16949 certified facilities), please
contact us o r your l ocal D iodes representative.
https://www.diodes.com/quality/product-definitions/
y Packaging (Pb-free & Green):
à 52-pin, 3.5mm x 9mm (ZL)