Features
• Common features:
– STM32MP157 Arm®-based dual Cortex®‑A7 800 MHz 32 bits +
Cortex®‑M4 32 bits MPU in a TFBGA361 package
– ST PMIC STPMIC1
– 4-Gbit DDR3L, 16 bits, 533 MHz
– 1-Gbit/s Ethernet (RGMII) compliant with IEEE-802.3ab
– USB OTG HS
– Audio codec
– 4 user LEDs
– 2 user and reset push-buttons, 1 wake-up button
– 5 V / 3 A USB Type-C® power supply input (not provided)
– Board connectors:
◦ Ethernet RJ45
◦ 4 × USB Host Type-A
◦ USB Type-C® DRP
◦ MIPI DSI®
◦ HDMI®
◦ Stereo headset jack including analog microphone input
◦ microSD™ card
◦ GPIO expansion connector (Raspberry Pi® shield capability)
◦ ARDUINO® Uno V3 expansion connectors
– On-board ST-LINK/V2-1 debugger/programmer with USB reenumeration
capability: Virtual COM port and debug port
– STM32CubeMP1 and full mainline open-source Linux® STM32 MPU
OpenSTLinux Distribution (such as STM32MP1Starter) software and
examples
– Support of a wide choice of Integrated Development Environments
(IDEs) including IAR Embedded Workbench®, MDK-ARM, and
STM32CubeIDE
• Board-specific features:
– 4" TFT 480×800 pixels with LED backlight, MIPI DSI® interface, and
capacitive touch panel
– Wi‑Fi® 802.11b/g/n
– Bluetooth® Low Energy 4.1