1. General description
The 74LV4060 is a 14-stage ripple-carry counter/divider and oscillator with three oscillator
terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an
overriding asynchronous master reset (MR). The oscillator configuration allows design of either
RC or crystal oscillator circuits. The oscillator may be replaced by an external clock signal at input
RS. In this case, keep the oscillator pins (RTC and CTC) floating. The counter advances on the
HIGH-to-LOW transition of RS. A HIGH level on MR clears all counter stages and forces all outputs
LOW, independent of the other input conditions. Inputs include clamp diodes. This enables the use
of current limiting resistors to interface inputs to voltages in excess VCC.
2. Features and benefits
• Wide supply voltage range from 1.0 V to 5.5 V
• Optimized for low voltage applications from 1.0 V to 3.6 V
• CMOS low power dissipation
• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
• Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V
• Typical VOLP (output ground bounce) < 0.8 V at VCC = 3.3 V; Tamb = 25 °C
• Typical VOHV (output VOH undershoot) > 2 V at VCC = 3.3 V; Tamb = 25 °C
• All active components on-chip
• RC or crystal oscillator configuration
• Complies with JEDEC standard no. 7A
• ESD protection:
• HBM JESD22-A114F exceeds 2000 V
• MM JESD22-A115A exceeds 200 V
3. Applications
• Control counters
• Timers
• Frequency dividers
• Time-delay circuits