Description
The RAA270005KFP is a general-purpose Power Management IC (PMIC), and suitable for RENESAS
RH850/P1x series microcontroller (MCU). The features and the details of the PMIC are described in this
document.
The PMIC contains two types of DCDCs converters: buck and boost, two low dropout linear regulators
(LDO) and two linear trackers.
The switching frequency of boost/buck DCDCs are typical 420 kHz, 2.1 MHz respectively.
Monitor functions for the internal status are implemented. Input voltage, output of all regulators, and
internal analog voltage corresponding to temperature can be monitored through ADC of MCU. And
reference voltage can be monitored for testing the ADC of MCU as well.
The PMIC has sequencer circuits for controlling power-up/down, therefore any external sequencer
circuits are unnecessary. And the PMIC can control an external backup-power for MCU.
Features
• Supply the power to Renesas RH850/P1x (eVR)
• Load dump robustness
• Input voltage range: 6.6~18.5V to perform specified characteristics.
5.4V~: continued operation without low voltage detection
3.8V~: continued operation declined the output voltage
* If not use the boost DCDC converter
• DCDC converter:
Boost: 6.0V/250mA (Input voltage: 2.2V~)
Buck: 6.1V/600mA
• Linear regulators:
1. Output voltage : 3.3V/10mA
2. Output voltage : 5.0V/350mA with reverse protection
• Two linear trackers
Output voltage: VOUT1/100mA with reverse protection
• Automatic power sequence
• An external backup-power control
• Watchdog timer
• Analog multiplexer
• Interrupt request
• Thermal shut down
• Reset generator
• External devices control
• Monitoring to a core voltage in MCU.
• Exposed die pad, HLQFP package, 40pin 9mm x 9mm