GENERAL DESCRIPTION
The 873995 is a Zero Delay/Multiplier/Divider with hitless input clock
switching capability and a member of the family of low jitter/phase
noise devices from IDT. The 873995 is ideal for use in redundant,
fault tolerant clock trees where low phase noise and low jitter are
critical. The device receives two differential LVPECL clock signals
from which it generates 6 LVPECL clock outputs with “zero” delay.
The out-put divider and feedback divider selections also allow for
frequency multiplication or division.
The 873995 Dynamic Clock Switch (DCS) circuit continuously
monitors both input clock signals. Upon detection of a failure (input
clock stuck LOW or HIGH for at least 1 period), INP_BAD for that
clock will be set HIGH. If that clock is the primary clock, the DCS will
switch to the good secondary clock and phase/frequency alignment
will occur with minimal output phase disturbance.
The low jitter characteristics combined with input clock monitoring
and automatic switching from bad to good input clocks make the
873995 an ideal choice for mission criti-cal applications that utilize
1G or 10G Ethernet or 1G/4G/10G Fibre Channel.

FEATURES
• Six differential 3.3V LVPECL outputs
• Selectable differential clock inputs
• CLKx, nCLKx pair can accept the following differential
input levels: LVPECL, LVDS, LVHSTL, HCSL, SSTL
• Input clock frequency range: 49MHz to 213.33MHz
• Output clock frequency range: 49MHz to 640MHz
• VCO range: 490MHz to 640MHz
• External feedback for “zero delay” clock regeneration
with confi gurable frequencies
• Output skew: 100ps (maximum)
• RMS phase jitter (1.875MHz - 20MHz): 0.77ps (typical) assuming a low phase noise reference clock input
• 3.3V supply voltage
• 0°C to 70°C ambient operating temperature
• Available in lead-free (RoHS 6) package
• Use replacement part 873996AYLF