DESCRIPTION
This document describes the specifications for the F0562
2300MHz to 2700MHz dual path Sampling IF (SIF)
Receiver used in Multi-mode, Multi-carrier BaseStation
Receivers. Refer to the Part # Matrix below describing
the frequency coverage of the complete series. This
series is offered with high side or low side LO injection
options for all UTRA bands and offers significantly better
Noise and Distortion performance than currently
available solutions. IF frequencies from 60MHz to
450MHz are supported.
The F0562 SIF provides 29dB gain and offers 47dB
gain adjustment in 1dB steps designed to operate with
a single 5V supply. Nominally, the device offers +44
dBm Output IP3 using 480mA of ICC. Alternately one
can configure the device in low current (LC) mode to
reduce power consumption to < 2 Watts.
This device is packaged in a 10 x 10 mm 68-pin Thin
QFN with 50 ohm single-ended RF input and 200 ohm
differential IF output impedances for ease of integration
into the receiver lineup. The 200 ohm differential IF
output can easily be matched to 100 ohms differential
per the application drawing.

FEATURES
• Dual Path for Diversity Systems
• Combines FlatNoiseTM and Zero-Distortion
technologies
• 29dB Total Power Gain
• Ultra linear +44dBm IP3O
• Low NF: 9.9dB at GMAX
• 50 Ω input impedance
• Matched 100Ω differential output impedance
• Ultra high +19.8dBm P1dBo
• Independent path standby mode
• Constant LO impedance in STBY mode
• 47dB gain control range
• 6-bit parallel control
• 1dB Gain Steps
• 60MHz – 450MHz IF frequency range
• Excellent 2nd Harmonic Rejection
• ICC = 390mA LC Mode
• 10 x 10 mm 68-pin VFQFPN package