GENERAL DESCRIPTION
The ADXL314 is a ±200 g range, 13-bit resolution, 3-axis digital
accelerometer. The digital output data is formatted as 16-bit, twos
complement data and is accessible through a serial peripheral
interface (SPI), 3-wire or 4-wire, or an I2C digital interface.
An integrated memory management system with a 32 level, first in,
first out (FIFO) buffer can store data to minimize host processor
activity and lower overall system power consumption.
Low power modes enable intelligent motion-based power management
with threshold sensing and active acceleration measurement
at low power dissipation, typically 65 μA for VS = 2.5 V at a 100 Hz
output data rate (ODR).
The ADXL314 is supplied in a small, thin 5 mm × 5 mm × 1.45 mm, 32-lead LFCSP.

FEATURES
► ±200 g measurement range
► Low power: 170 μA in measurement mode and 17 μA in standby
mode at VS = 2.5 V (typical)
► User selectable bandwidth up to 3200 Hz ODR
► Fixed 13-bit output resolution
► Supply voltage range: 2.0 V to 3.6 V
► Embedded memory management system with FIFO technology
minimizes host processor load
► Shock event detection
► Activity/inactivity monitoring
► SPI (3- or 4-wire) and I2C digital interfaces
► Wide temperature range: −40 to +125°C
► 10,000 g shock survival
► Pb free and RoHS compliant
► Small and thin: 32-lead, 5 mm × 5 mm × 1.45 mm LFCSP
► AEC-Q100 qualified for automotive applications

APPLICATIONS
► Tire and battery pack monitoring
► High force event detection