Description
Monitors both battery voltage and ignition status, shutting
down non-critical loads when the cutoff voltage is reached, or
at the set time after the ignition is turned off. It is a timer and
voltage sensor in one easy-to-connect unit. If either the cutoff
voltage or time limit is reached, the FlexMod will shut down
the auxiliary loads, providing double protection.

Features and Benefits
• Preserves starting power; eliminates downtime and jump
starts due to dead batteries. Simultaneous time and voltage
monitoring protects starting.
• Monitors voltage and time simultaneously, providing double
the protection to batteries. Battery will not be drained if
battery voltage gets low before timer has run out.
• Auto-ranging to automatically sense the voltage of the
system (12 or 24V) and selects the presets appropriate to
that voltage.
• Waterproof, dustproof and vibration-proof. Sealed to IP67
so it can mount on a vehicle even in places where roadsplash
is a problem.
• Ultra low 1mA standby current means minimal battery
drain – especially valuable when vehicle is in storage or not
in use.
• Factory programmable unit is highly versatile: with a broad
range of presets available to match any special application.
• Rated for more than 1,000,000 on-off cycles – unit
operates for the lifetime of the vehicle. Solid state
technology gives long life and low maintenance.
• Compact design (4 x 3 x 1”) – Uses less space; mounts
outside or inside. Saves money by eliminating other
hardware, and provides better wire routing