Features
 AEC-Q100 qualified
 Three half bridges for
0.75 A loads (RDSon = 1600 mΩ
 Two configurable high-side drivers for up to
1.5 A load (R DSon = 500 mΩor 0.35 A load
(RDSon = 1800 mΩ)
 One high-side driver for 6 A load
(R DSon = 100 mΩ)
 Programmable soft start function to drive loads
with higher inrush currents (i.e. current > 6 A,
current > 1.5 A)
 Very low current consumption in standby mode
(IS < 6 μA typ; Tj 85 °C)
 All outputs short circuit protected
 Current monitor output for high-side OUT1,
OUT4, OUT5 and OUT6
 All outputs over temperature protected
 Open-load diagnostic for all outputs
 Overload diagnostic for all outputs
 PWM control of all outputs

Description
The L99MOD54XP is a microcontroller-driven multifunctional actuator driver for automotive applications.
Up to two DC motors and three grounded resistive loads can be driven with three half bridges and three high-side drivers.
The integrated SPI controls all operating modes (forward, reverse, brake and high impedance).
Also all diagnostic information is available via SPI read.

Applications
L99MOD devices are recommended for those applications that need multiple motors control with additional loads in high-side configuration, such as bulbs/LEDs or requiring protected supply, like sensors or cameras.