Features
• AEC-Q100 qualified
• Dual supply pins
– VIN: 0.8 V to 5.5 V
– VBIAS: 2.7 V to 5.5 V
• VOUT range: 0.8 V to 3.6 V
• Ultra low-dropout: 65 mV typ. (125 mV max.) at 1.5 A
• High VOUT accuracy
– 0.5% typ. at Tamb
– 2% max.
• Power Good function
• Programmable soft-start
• Thermal shutdown
• Current limitation circuit
• Adjustable output voltage
• Stable with low ESR output capacitor (> 2.2 μF)
• DFN10 (3x3) mm package with wettable flanks
• Operating temperature range: - 40 °C + 125 °C

Description
The LD59150 is a 1.5 A LDO regulator, designed to be used in several environments.
Two versions, Industrial and AEC-Q100 are available.
NMOS topology allows RDS(on) of the pass-element to be reduced, which results in a
very small dropout voltage even with a very low input supply voltage.
Output voltage can be adjusted from 0.8 to 3.6 V, by an external resistor divider.
The programmable soft-start circuit offers the possibility to control the inrush current
at start-up providing a monotonic supply voltage to the load.
The LD59150 has enable pin to turn on/off (EN) the regulator and Power Good to
monitor the regulated output voltage (PG).
The combination of both can be used to set a desired power sequence in case of
multiple regulated rails.
The LD59150 embeds protection functions, such as: current limit and thermal
shutdown.

Applications
• Automotive and industrial post regulation
• Generic POL
• Automotive and industrial ASICs and FPGA supply
• Telecom infrastructure
• A.D.A.S. (advanced driver-assistance systems)