1 Features
• Linear redriver supporting PCIe 5.0, CXL 2.0, UPI
2.0 up to 32 Gbps
• Supports most ac coupled interfaces including DP,
SAS, SATA, XFI
• Provides four 2x2 Crosspoint mux function
• CTLE boosts up to 22 dB at 16 GHz
• Ultra-low latency of 100 ps
• Low additive random jitter of 75 fs for PRBS data
• Excellent return loss of −10 dB at 16 GHz
• Single 3.3 V supply
• Internal voltage regulator provides immunity to
supply noise
• Low active power of 160 mW per channel
• No heat sink required
• Pin-strap, SMBus or EEPROM programming
• Automatic receiver detection for PCIe use cases
• Protocol agnostic linear redriver allows seamless
support for PCIe link training
• Support for x2, x4, x8, x16, x24 bus width with one
or multiple DS320PR822
• Temperature range of –40 °C to 85 °C
• 5.5 mm × 10 mm, 64 pin WQFN package

2 Applications
• Rack server, microserver, and tower server
• High performance computing
• Hardware accelerator
• Network attached storage
• Storage area network (SAN) and host bus adapter
(HBA) card
• Network interface card (NIC)
• Desktop PC or motherboard

3 Description
The DS320PR822 is a low-power high-performance
linear repeater or redriver designed to support PCIe
5.0, CXL 2.0, UPI 2.0, and other interfaces up to
32 Gbps. The DS320PR822 provides four 2x2 crosspoint
mux functionality.
The DS320PR822 receivers deploy continuous time
linear equalizers (CTLE) to provide a programmable
high-frequency boost. The equalizer can open an
input eye that is completely closed due to intersymbol
interference (ISI) induced by an interconnect
medium, such as PCB traces. The CTLE receiver
is followed by a linear output driver. The linear datapaths
of DS320PR822 preserve transmit preset signal
characteristics. The linear redriver becomes part of
the passive channel that as a whole get link trained
for best transmit and receive equalization settings.
This transparency in the link training protocol results
in best electrical link and lowest possible latency.
Low channel-channel cross-talk, low additive jitter
and excellent return loss makes the device almost
a passive element in the link, but with its useful
equalization. The data-path of the device uses an
internally regulated power rail that provides high
immunity to any supply noise on the board.
The device also has low AC and DC gain variation
providing consistent equalization in high volume
platform deployment.