FEATURES
Ultra Low Noise: 4.5μAP-P @ 0.1Hz to 10Hz
High IOUT without Heat Sink: 500mA
High IOUT Absolute Accuracy: <0.1%
High IOUT Stability: <100ppm/°C
Separate IOUT and IOUT limit settings
Complete Shielding
Compact Size
100 % Lead (Pb)-free and RoHS Compliant
DIP and SMT Packages Available

DESCRIPTION
The ATLS500MA106 is an electronic module designed for
driving diode lasers with up to 500mA extra low noise
current. Figure 1 shows physical photo of ATLS500MA106.
The output voltage is 1.5V to 4V when powered by a 5V
power supply.
The controller has temperature compensation network so
that the output current maintains the same even as the
controller temperature rises.
In case the controller temperature exceeds a preset limit, 120°C,
the controller will be shut down by itself to prevent the
controller from being damaged by the over heat.
The output current of the ATLS500MA106 can be set by an
input voltage linearly or modulated by an external signal of up
to 100kHz in bandwidth, resulting in a minimum 1.5μS rise
and fall times at the output current.
A highly stable low noise 2.5V reference voltage is provided
internally for setting the output current. This reference can also
be used as the voltage reference for external ADCs (Analog to
Digital Converters) and/or DACs (Digital to Analog
Converters) which are utilized for converting the analog signals,
such as LIO which represents the output current, into digital
signals, and/or converting the digital signals into analog ones
for setting the analog voltages, such as LIS which sets the
output current.
The ATLS500MA106 is packaged in a 6 sided metal enclosure,
which blocks EMIs (Electro-Magnetic Interferences) to prevent
the controller and other electronics from interfering each other.
This laser driver can be evaluated by our evaluation board,
ATLS1A103DEV1.0.
There are 2 packaging versions available: DIP through hole
package and surface mount type.