DESCRIPTION
The 587B Series of 120 Volt AC Surge Suppressors is designed for use by the OEM, equipment installer and or maintenance contractor. These modules employ a three stage technology proven to be the most cost effectve and reliable method in protectng sensitve electronic equipment from over voltage transients. This series is designed to protect AC powered equipment from the 6,000 volt peak open circuit voltage and 3,000 Amp short circuit current as defned in ANSI/IEEE C62.41, Category C1.
The 587B Series offers a high degree of protecton against 120 VAC EMI line noise. It is ideal for protectng 400 Volt components because the solid state TVS technology assures that the line-to-neutral voltage will not exceed 400 Volts. While the modules are designed for transient voltage protecton, the advanced circuitry will also atenuate the amplitude and slow the rate of rise of high frequency noise actng as an EMI flter. The 587B Series includes differental mode protecton, which is effectve in reducing interference from line to equipment and are effectve in reducing equipment generated noise to meet FCC, VDE and CSA interference requirements.

FEATURES
• Compatble with IEC 61000-4-5 (Surge): 1kA, 8/20µs, Level 4 (Line Gnd) & 333A, Level 4 (Line-Line)
• Meets ANSI/IEEE C62.41 Requirements
• Listed to CSA, File LR65240
• Differental and Common Mode Protecton
• Low Clamping Voltage
• Nanosecond Response Time
• Long Life and Maintenance Free

APPLICATIONS
• Hard Wired Equipment AC Power Protecton
• Load Side Distributon Systems
• Secondary Protecton for Light Industrail AC Power