1. Current Consumption (Important Notes):

️· Base Current: All IDC (Instant DC) current numbers include a base circuitry current of 3.5mA.
️· TX Buffer: Adding the TX Buffer increases current by 2mA.
️· /2 Select: Enabling the /2 Select function adds another 2mA.

2. Current Consumption (Specific Configurations):


️· Cell CDMA:
- LNA ON, Mixer Preamp ON: 27.5 mA
- LNA ON, Mixer Preamp OFF: 23.0 mA
- LNA OFF, Mixer Preamp ON: 23.0 mA
- LNA OFF, Mixer Preamp OFF: 18.5 mA
️· FM: Same current consumption as Cell CDMA (27.5, 23.0, 23.0, 18.5 mA)
️· PCS CDMA:
- LNA ON, Max IIP3, Mixer ON: 29.5 mA
- LNA ON, Max IIP3, Mixer OFF: 25.0 mA
- LNA ON, Min IIP3, Mixer ON: 27.5 mA
- LNA ON, Min IIP3, Mixer OFF: 23.0 mA
- LNA OFF, Mixer ON: 23.0 mA
- LNA OFF, Mixer OFF: 18.5 mA
️· GPS: 26.0 mA

3. Performance Metrics (Typical Values):

The document also provides typical performance metrics like Gain, Noise Figure, and Input IP3 for each standard in different configurations. Here's a condensed overview, focusing on the *best* (highest Gain, lowest Noise Figure, highest Input IP3) values:

Standard	Gain (dB)	Noise Figure (dB)	Input IP3 (dBm)
Cell CDMA	25.0	2.1	-7.8
FM	24.5	2.1	-6.6
PCS CDMA	26.5	2.2	-9.1
GPS	32.5	1.7	-15.4

Important Considerations/Notes:

️· Image Filter: Performance data assumes a 3dB image filter insertion loss (except GPS which uses 1.5dB).
️· Configuration: Performance significantly depends on LNA and mixer preamp settings.
️· VCC: Performance numbers are for VCC = 2.75V.
️· IPSET: Numbers represent low current LNA bias setting (IPSET=0).