XU-T6Z1-R
AI

The **XU-T6Z1-R** is a specific part number belonging to the **XBee** ecosystem, manufactured by **Digi International**. This component is a specialized RF (Radio Frequency) module designed for wireless communication in industrial and commercial environments.
Below is a detailed breakdown of its electronic specifications and features.
---
### 1. General Specifications
The XU-T6Z1-R is part of the **XBee-PRO ZB (S2B)** series. These modules are known for their high-power output and compatibility with the Zigbee mesh networking protocol.
| Feature | Specification |
| :--- | :--- |
| **Manufacturer** | Digi International |
| **RF Protocol** | Zigbee (802.15.4) |
| **Form Factor** | Through-hole (S2B Hardware) |
| **Frequency Band** | 2.4 GHz ISM |
| **Transmit Power** | Up to 63 mW (+18 dBm) |
| **Indoor Range** | Up to 300 ft (90 m) |
| **Outdoor Range** | Up to 2 miles (3200 m) L.O.S |
---
### 2. Technical Hardware Architecture
The module integrates a microcontroller, a transceiver, and specialized RF circuitry to handle the complexity of mesh networking without requiring heavy processing from the host MCU.
* **Microcontroller:** Uses an Ember EM357 SoC (System on Chip).
* **Interface:** Communicates with host devices via **UART** (Serial) or **SPI**.
* **Antenna Type:** The "R" in the suffix usually denotes a specific antenna connector; typically, this model features an **RPSMA connector** (Reverse Polarity SMA) for external high-gain antennas.
* **Operating Voltage:** 2.7V to 3.6V DC.
* **Current Consumption:**
* **Transmit:** ~205 mA (@ 3.3V).
* **Receive:** ~47 mA (@ 3.3V).
* **Sleep:** < 3.5 µA.
---
### 3. Key Electronic Features
* **Mesh Networking:** Supports Self-healing and Self-discovery networking, allowing data to hop through multiple nodes to reach a destination.
* **I/O Capabilities:**
* 10 Digital I/O pins.
* 4 10-bit ADC (Analog-to-Digital Converter) input pins.
* **Security:** 128-bit AES encryption for secure wireless data transmission.
* **Configuration:** Can be configured using **AT commands** or the **XCTU** software provided by Digi.
---
### 4. Common Pinout Configuration
| Pin # | Name | Description |
| :--- | :--- | :--- |
| 1 | VCC | Power Supply (3.3V) |
| 2 | DOUT | UART Data Out |
| 3 | DIN | UART Data In |
| 10 | GND | Ground |
| 17 | AD3 / DIO3 | Analog Input 3 / Digital I/O 3 |
| 20 | AD0 / DIO0 | Analog Input 0 / Commissioning Button |
---
- ⤷
What is the difference between the XBee-PRO and the standard XBee modules?
- ⤷ How do I configure the XU-T6Z1-R using XCTU software?
- ⤷ Which external antennas are compatible with the RPSMA connector on this module?