WPT-102-R
AI

The **WPT-102-R** is a specific electronic component typically categorized as a **Surface Mount Device (SMD) Tactile Switch**. These components are widely used in consumer electronics to provide a physical interface for users to input commands.
---
### 1. Key Technical Specifications
The WPT-102-R is designed for high reliability and a small footprint on Printed Circuit Boards (PCBs).
| Feature | Specification |
| :--- | :--- |
| **Component Type** | Tactile Switch |
| **Mounting Type** | SMD (Surface Mount Device) |
| **Orientation** | Right Angle (Horizontal actuation) |
| **Contact Arrangement** | SPST (Single Pole Single Throw) |
| **Contact Rating** | Usually 50mA, 12V DC |
| **Operating Force** | Typically 160gf to 250gf |
| **Life Cycle** | ~50,000 to 100,000 cycles |
---
### 2. Internal Electronic Structure
The switch functions as a momentary "Normally Open" (NO) circuit.
* **The Dome (Contact Plate):** Usually made of stainless steel or phosphor bronze. When pressed, it collapses to bridge two stationary contacts.
* **Terminals:** The "R" in the suffix often denotes a **Right Angle** configuration, meaning the solder pads are positioned so the button faces the edge of the PCB.
* **Housing:** High-temperature thermoplastic (LCP or Nylon) to withstand reflow soldering temperatures.
---
### 3. Circuit Integration
In a typical electronic schematic, the WPT-102-R is used as an input trigger for a Microcontroller (MCU).
```cpp
// Example: Arduino Logic for a Tactile Switch
const int buttonPin = 2;
int buttonState = 0;
void setup() {
pinMode(buttonPin, INPUT_PULLUP); // Uses internal resistor
}
void loop() {
buttonState = digitalRead(buttonPin);
if (buttonState == LOW) {
// Switch is pressed, circuit is closed to GND
}
}
```
---
### 4. Common Applications
Due to its right-angle design and tactile feedback, the WPT-102-R is commonly found in:
1. **Handheld Devices:** Power buttons or volume rockers on the sides of devices.
2. **Wearables:** Reset buttons inside smartwatches or fitness trackers.
3. **Industrial Controls:** User interface buttons on compact control panels.
4. **Computer Peripherals:** Side buttons on gaming mice.
- ⤷
What are the physical dimensions of the WPT-102-R footprint?
- ⤷ How does the 'Right Angle' mounting affect the PCB layout?
- ⤷ What is the recommended reflow soldering temperature profile for this switch?