VIPER0PLD
AI

The **VIPER0PLD** belongs to the VIPerPlus family of high-voltage converters from STMicroelectronics. It is an offline power converter that integrates a high-voltage power MOSFET with a PWM controller into a single package, designed specifically for low-power Switched-Mode Power Supplies (SMPS).
---
### 1. Key Internal Electronic Components
The device is a "monolithic" IC, meaning several functional blocks are integrated onto one silicon chip:
| Component | Description |
| :--- | :--- |
| **800V Power MOSFET** | A high-voltage switch that handles the primary current of the transformer. Its high breakdown voltage allows it to withstand significant voltage spikes. |
| **PWM Controller** | Pulse Width Modulation logic that regulates the output voltage by adjusting the duty cycle of the MOSFET. |
| **SenseFET** | A specialized part of the MOSFET used to measure the drain current accurately without a bulky external shunt resistor. |
| **Internal High-Voltage Startup** | Allows the chip to start up directly from the rectified mains voltage, eliminating the need for an external bleeder resistor. |
---
### 2. Technical Specifications
The VIPER0PLD is optimized for "buck," "buck-boost," or "flyback" topologies.
| Parameter | Value / Characteristic |
| :--- | :--- |
| **Drain-Source Voltage ($V_{DSS}$)** | 800 V |
| **Switching Frequency** | 60 kHz (Fixed) |
| **Max Drain Current ($I_{Dlim}$)** | 260 mA |
| **Package Type** | SO-8 (Small Outline) |
| **Topology Support** | Non-isolated (Buck) and Isolated (Flyback) |
---
### 3. Integrated Protection Features
One of the primary advantages of the VIPER0PLD is its built-in protection circuitry, which reduces the need for external components:
* **Pulse-by-Pulse Current Limiting:** Protects the MOSFET from over-current during every switching cycle.
* **Hysteretic Thermal Shutdown:** Shuts down the IC if the junction temperature exceeds $150^\circ C$ to prevent permanent damage.
* **Overvoltage Protection (OVP):** Monitors the $V_{CC}$ pin to ensure the voltage does not exceed safe limits.
* **Auto-Restart:** In the event of a fault (like a short circuit), the device attempts to restart periodically once the fault is removed.
---
### 4. Typical Application Circuitry
To build a functional power supply using the VIPER0PLD, you typically only need a few external parts:
1. **Input Rectifier:** Diodes to convert AC to DC.
2. **Filter Capacitor:** To smooth the rectified high voltage.
3. **Inductor/Transformer:** To store and transfer energy.
4. **Feedback Network:** Usually a resistor divider or an optocoupler to tell the IC to adjust the power.
---
- ⤷What are the main differences between the VIPER0P and the VIPER01 series?
- ⤷ How do I calculate the output power limit for a buck converter using the VIPER0PLD?
- ⤷ Can the VIPER0PLD be used in battery charger applications?