TCRB0807
AI

The **TCRB0807** is a specific surface-mount electronic component, typically categorized as a **Wire-Wound Chip Inductor** (specifically a Common Mode Choke or a Power Inductor depending on the specific series variation). These are widely used in power management and signal filtering circuits.
Below is a breakdown of its technical aspects.
---
## 1. Physical Characteristics
The "0807" suffix refers to the standardized package size (Case Code), which dictates the physical footprint on a Printed Circuit Board (PCB).
| Parameter | Measurement (Approx.) |
| :--- | :--- |
| **Length** | ~2.0 mm (0.08 inches) |
| **Width** | ~1.8 mm (0.07 inches) |
| **Mounting Type** | Surface Mount (SMD/SMT) |
| **Construction** | Ferrite core with copper wire winding |
---
## 2. Electrical Functions
The TCRB series is primarily designed for high-density mounting. Its main roles include:
* **Noise Suppression:** Acting as a filter to prevent electromagnetic interference (EMI).
* **Energy Storage:** Storing energy in a magnetic field when current flows through it (in DC-DC converters).
* **Impedance Control:** Providing high impedance at specific frequencies to "choke" unwanted high-frequency noise while allowing DC or low-frequency signals to pass.
---
## 3. Technical Specifications Table
*Note: Exact values vary based on the specific inductance rating (measured in $\mu H$).*
| Feature | Description |
| :--- | :--- |
| **Inductance Range** | Typically ranges from $1.0\mu H$ to $100\mu H$ |
| **Tolerance** | Usually $\pm 10\%$ or $\pm 20\%$ |
| **Current Rating** | Designed for high saturation currents (Isat) |
| **DC Resistance (DCR)** | Optimized to be as low as possible to prevent heat loss |
| **Operating Temp** | Typically $-40^\circ C$ to $+125^\circ C$ |
---
## 4. Common Applications
Due to its small size and high efficiency, the TCRB0807 is found in:
1. **Mobile Electronics:** Smartphones and tablets for power rail filtering.
2. **DC-DC Converters:** Buck or Boost converters where space is limited.
3. **LED Drivers:** Managing current ripple in lighting circuits.
4. **Audio Circuits:** Filtering noise in Class-D amplifiers.
---
## 5. Identifying the Part Number
The part number usually follows a specific nomenclature:
`TCRB [Size] [Inductance Value] [Tolerance]`
Example: **TCRB0807-100K**
* **TCRB:** Series Name
* **0807:** Case Size
* **100:** Inductance ($10 \times 10^0 = 10\mu H$)
* **K:** Tolerance ($\pm 10\%$)
- ⤷
What is the maximum current rating for a TCRB0807 10uH inductor?
- ⤷ How does the 0807 size compare to the 0603 size in terms of performance?
- ⤷ What are the common manufacturers of the TCRB series components?