PVM4A503C01B00_V01
AI

Based on the part number **PVM4A503C01B00**, this component is a high-precision **Surface Mount Trimmer Potentiometer** manufactured by **Murata Electronics**.
Below is a detailed breakdown of its electronic characteristics and specifications.
---
## 1. Product Identification & Series
The PVM4 series consists of 4mm square, single-turn, dust-proof cermet trimmers designed for high-density circuit board mounting.
| Parameter | Specification |
| :--- | :--- |
| **Series** | PVM4 |
| **Element Type** | Cermet (Ceramic/Metal composite) |
| **Adjustment Type** | Top Adjustment (Single Turn) |
| **Mounting Type** | Surface Mount (SMD) - J-Hook or Gull-wing |
## 2. Electrical Specifications
The "503" in the part number defines the resistance value using the standard three-digit code.
| Feature | Value / Description |
| :--- | :--- |
| **Nominal Resistance** | 50 kΩ (50 + three zeros) |
| **Resistance Tolerance** | ±25% |
| **Power Rating** | 0.1W at 70°C (0W at 125°C) |
| **Max. Operating Voltage** | 50V DC |
| **Effective Rotation Angle** | 210° ± 10° |
| **Residual Resistance** | Less than 1% or 3Ω (whichever is greater) |
## 3. Physical & Mechanical Properties
These parts are engineered for automated assembly and long-term stability in small consumer electronics.
* **Dimensions:** Approximately 4.0mm x 4.5mm x 2.2mm.
* **Substrate:** Alumina ceramic to ensure heat resistance during reflow soldering.
* **Rotation Torque:** 2 to 20 mN·m.
* **Stop Strength:** >20 mN·m (Mechanical end stops).
## 4. Environmental Ratings
| Condition | Limit |
| :--- | :--- |
| **Operating Temp Range** | -55°C to +125°C |
| **Temp. Coefficient (TCR)** | ±250ppm/°C |
| **Rotational Life** | 20 cycles (Standard for trimmers) |
---
### Key Applications
1. **LCD Contrast Adjustment:** Tuning the brightness/contrast on small displays.
2. **Sensor Calibration:** Fine-tuning threshold voltages in IR or proximity sensors.
3. **Communication Equipment:** Adjusting signal gain in handheld radios or RF modules.
4. **Power Supplies:** Setting output voltage levels in DC-DC converters.
- ⤷
What is the difference between the C01 and A01 suffixes in Murata PVM4 series?
- ⤷ Can this potentiometer be washed after reflow soldering?
- ⤷ What are the recommended footprint dimensions for the PVM4A variant?