Os motores de busca de Datasheet de Componentes eletrônicos
  Portuguese  ▼
ALLDATASHEETPT.COM

X  

  • PLO10A-RFI

  • AI
    The **PLO10A-RFI** is a high-power, wirewound resistor manufactured by IRC (part of the TT Electronics group). The "PLO" series stands for "Power Low Ohm," and the "RFI" suffix typically denotes a version designed for enhanced **Radio Frequency Interference** suppression or specific lead-forming/packaging requirements. Below is a detailed breakdown of its electronic characteristics and construction. --- ## 1. Technical Specifications These parameters define the electrical limits of the component: | Parameter | Specification (Typical) | | :--- | :--- | | **Power Rating** | 10 Watts (at 25°C) | | **Resistance Range** | 0.01 $\Omega$ to 0.1 $\Omega$ (commonly) | | **Tolerance** | $\pm$1%, $\pm$2%, $\pm$3%, $\pm$5%, or $\pm$10% | | **Temperature Coefficient** | $\pm$300 to $\pm$500 ppm/°C (varies by value) | | **Dielectric Strength** | 1000 VAC | | **Operating Temperature** | -55°C to +275°C | --- ## 2. Key Electronic Components & Construction The PLO10A series is built to withstand high thermal stress and current surges. ### Core Materials * **Resistive Element:** A specialty alloy wire (often Copper-Nickel or Chrome-Aluminum) wound precisely around a high-purity ceramic core. * **Encapsulation:** The entire assembly is housed in a rectangular **Steatite (ceramic) case** and sealed with a flameproof inorganic potting compound. This provides excellent environmental protection and high dielectric strength. ### The "RFI" Distinction The "RFI" designation in this series often implies: 1. **Low Inductance Design:** While standard wirewound resistors are inductive, certain RFI versions use "Ayrton-Perry" winding (non-inductive) or specific internal geometries to minimize electromagnetic interference. 2. **Lead Configuration:** "A" often refers to the lead style (e.g., radial lead or specific lead spacing) that allows the resistor to stand off the PCB to prevent heat damage to the board. --- ## 3. Applications Due to its 10W power capacity and low-ohm nature, it is used in: * **Current Sensing:** Measuring current flow in power supplies by monitoring the voltage drop across the resistor. * **Surge Suppression:** Absorbing high-energy transients in motor controllers. * **Voltage Division:** In high-current DC circuits. * **Feedback Loops:** Used in audio amplifiers and industrial control systems where high power stability is required. --- ## 4. Key Advantages * **Flameproof Construction:** If the resistor fails due to excessive overload, it will not catch fire. * **High Pulse Capacity:** The wirewound nature allows it to handle much higher momentary surges than film resistors. * **Self-Insulating:** The ceramic case acts as an insulator, allowing for dense PCB mounting without shorting against other components.
    ✨ Follow-up Questions
    • ⤷ What is the maximum surge voltage the PLO10A-RFI can handle?
    • ⤷ How does the Ayrton-Perry winding reduce inductance in wirewound resistors?
    • ⤷ What are the recommended heat dissipation techniques for 10W resistors on FR4 PCBs?