MHO+67TFD-R
AI

Based on the part number provided, **MHO+67TFD-R** refers to a specific series of **Crystal Oscillators**, typically manufactured by companies like MtronPTI. These are precision timing components used in electronic circuits to generate a stable clock signal.
---
## 1. Technical Specifications Analysis
The part number is an alphanumeric code where each segment defines a specific characteristic of the component.
| Feature | Specification Details |
| :--- | :--- |
| **Component Type** | Crystal Oscillator (XO) |
| **Package Style** | 14-pin DIP (Dual In-line Package) - Full Size |
| **Output Type** | HCMOS / TTL Compatible |
| **Supply Voltage** | Typically 5.0V or 3.3V (Varies by sub-suffix) |
| **Frequency Range** | Typically supports 1.0 MHz to 100.0 MHz |
| **Operating Temp** | -40°C to +85°C (Industrial Grade) |
| **RoHS Status** | Compliant (Indicated by the "-R" suffix) |
---
## 2. Key Electronic Characteristics
### A. Frequency Stability
This part is designed to maintain a highly stable frequency output despite changes in temperature, voltage, or aging. This is critical for synchronizing data in digital systems.
### B. Output Waveform (HCMOS/TTL)
* **High-Speed CMOS:** Provides low power consumption and high noise immunity.
* **TTL Compatibility:** Ensures the oscillator can drive older logic gates as well as modern microcontrollers.
### C. Tri-state Functionality
The "T" in the suffix often indicates a **Tri-state (Enable/Disable)** function.
* **Pin 1 High:** The oscillator outputs the frequency.
* **Pin 1 Low:** The output goes into a high-impedance state, effectively disconnecting it from the circuit to save power.
---
## 3. Physical Layout (14-Pin DIP)
Although it uses a 14-pin footprint, only four pins are usually active:
| Pin Number | Function | Description |
| :--- | :--- | :--- |
| **1** | E/D or NC | Tri-state Control or No Connection |
| **7** | GND | Circuit Ground |
| **8** | Output | The generated clock signal |
| **14** | Vcc | Positive Power Supply |
---
## 4. Common Applications
* **Telecommunications:** Base stations and switching equipment.
* **Industrial Control:** PLC (Programmable Logic Controllers) and automation sensors.
* **Embedded Systems:** Providing the master clock for microprocessors and DSPs.
* **Legacy Hardware:** Maintenance and repair of older computing equipment using through-hole technology.
---
## 5. Equivalent Replacement Tips
If you are looking for a replacement, ensure the following parameters match exactly:
1. **Supply Voltage:** Mixing 3.3V and 5V can damage the part.
2. **Frequency:** Must be identical to the original (expressed in MHz).
3. **Stability:** Must be equal to or better than the original (measured in PPM).
---
- ⤷
What is the specific frequency rating for your version of the MHO+67TFD-R?
- ⤷ Do you need a circuit diagram showing how to connect the Tri-state pin?
- ⤷ Are you looking for a modern surface-mount (SMD) alternative to this DIP package?