MHO+57FFD-R
AI

The part number **MHO+57FFD-R** refers to a specific series of **Crystal Oscillators**, typically manufactured by companies like **Mercury Electronic**. These components are essential in digital circuits for providing a stable clock signal.
---
### 1. Technical Specifications
The "MHO" series generally represents a High-Output CMOS/TTL compatible crystal oscillator in a standard 14-pin DIP (Dual In-line Package) footprint.
| Feature | Specification (Typical for MHO Series) |
| :--- | :--- |
| **Package Type** | 14-Pin DIP (Full Size) |
| **Output Type** | CMOS / TTL |
| **Supply Voltage ($V_{DD}$)** | Usually 5.0V (indicated by the '5' in MHO+5) |
| **Frequency Stability** | $\pm$25ppm to $\pm$100ppm |
| **Operating Temperature** | -10°C to +70°C (Standard) |
| **RoHS Status** | Compliant (indicated by the -R suffix) |
---
### 2. Part Number Breakdown
While manufacturer coding can vary slightly, here is the standard breakdown for this nomenclature:
* **MHO**: Series Prefix (Metal Half-size or Full-size Crystal Oscillator).
* **+5**: Indicates a **5.0V** power supply requirement.
* **7**: Often denotes the frequency stability (e.g., $\pm$50ppm or $\pm$100ppm depending on the specific datasheet version).
* **F**: Usually indicates the symmetry/duty cycle (Standard 40/60%).
* **FD**: Refers to the specific Pin 1 function (often **Tri-state** or Enable/Disable function).
* **-R**: **RoHS Compliant**. This confirms the part is lead-free and meets environmental regulations.
---
### 3. Pin Configuration
Since this is a standard 14-pin DIP footprint (though only 4 pins are usually physically present), the layout is as follows:
| Pin Number | Function | Description |
| :--- | :--- | :--- |
| **1** | NC or E/D | No Connection or Enable/Disable (Tri-state) |
| **7** | GND | Circuit Ground |
| **8** | Output | The generated clock frequency signal |
| **14** | $V_{DD}$ | Positive Power Supply (+5V) |
---
### 4. Applications
This component is commonly found in "legacy" or industrial hardware where surface-mount technology (SMT) is not used.
* **Microprocessor Clocks:** Providing the heartbeat for CPUs.
* **Networking Gear:** Timing for routers and switches.
* **Test Equipment:** Providing stable references for measurement devices.
* **Embedded Systems:** Industrial controllers requiring 5V logic.
- ⤷
What is the specific output frequency for the MHO+57FFD-R?
- ⤷ Can this 5V oscillator be used in a 3.3V logic circuit?
- ⤷ What are the modern SMT equivalents for this 14-pin DIP oscillator?