MHO+52TAG-R
AI

The **MHO+52TAG-R** is a specific electronic component primarily identified as a **Crystal Oscillator**. It belongs to the MHO series, which are typically high-precision timing components used to provide a stable clock signal for microprocessors and digital circuits.
---
## 1. Technical Specifications
Below are the general technical parameters associated with the MHO series (specifically the 52TAG variant):
| Parameter | Specification (Typical) |
| :--- | :--- |
| **Component Type** | Quartz Crystal Oscillator |
| **Package / Case** | 14-pin DIP (Full Size) |
| **Frequency Range** | Usually 1.0 MHz to 100.0 MHz (Specific to exact model) |
| **Output Type** | CMOS / TTL |
| **Supply Voltage (Vcc)** | 5.0V DC (Standard for MHO+ series) |
| **Stability** | ±50ppm or ±100ppm |
| **Operating Temperature** | -10°C to +70°C (Standard Industrial) |
---
## 2. Part Number Breakdown
While manufacturer coding varies slightly, the "MHO+52TAG-R" usually breaks down as follows:
* **MHO+**: The series prefix, indicating a high-performance metal-packaged oscillator.
* **5**: Represents the voltage (often 5V).
* **2**: Often denotes the frequency stability (e.g., ±50ppm).
* **TAG**: These characters usually refer to specific internal design revisions or output symmetry (e.g., 45/55% duty cycle).
* **-R**: Indicates compliance with **RoHS** (Restriction of Hazardous Substances) standards.
---
## 3. Pin Configuration
The MHO+ series in a 14-pin DIP package typically uses only 4 functional pins despite its size:
```markdown
Pin 1: NC (No Connection) or Tri-state Enable/Disable
Pin 7: Ground (GND)
Pin 8: Output (Clock Signal)
Pin 14: Vcc (+5V Power Supply)
```
---
## 4. Key Applications
This component is designed for legacy and industrial systems that require robust timing:
1. **Industrial Controllers:** PLC logic and automation timing.
2. **Legacy Computing:** Motherboards and peripheral cards using through-hole technology.
3. **Communication Equipment:** Modems and routers requiring stable baud rate generation.
4. **Test & Measurement:** Oscilloscopes and signal generators.
- ⤷
What is the exact frequency of the MHO+52TAG-R in your application?
- ⤷ How does a 5V oscillator differ from a 3.3V oscillator in terms of circuit integration?
- ⤷ Are there surface-mount (SMD) equivalents available for this DIP package?