MHO+23TFG-R
AI

The **MHO+23TFG-R** is a specific model of a **Quartz Crystal Oscillator**, typically used as a high-precision clock source for digital circuits. These components are essential for providing a stable frequency reference in timing-sensitive electronics.
---
## Technical Specifications
The table below outlines the core electronic characteristics of the MHO series (based on standard industry specifications for this part number):
| Feature | Specification | Details |
| :--- | :--- | :--- |
| **Type** | Crystal Oscillator (XO) | Active component (requires power) |
| **Package Style** | 14-pin DIP (Full size) | Metal "can" package for through-hole mounting |
| **Standard Frequency** | Varies (e.g., 1.0MHz to 100MHz) | Determined by the internal quartz cut |
| **Output Type** | HCMOS / TTL | Compatible with logic-level circuits |
| **Supply Voltage (Vcc)** | +5.0V (Standard) | Common for older or industrial logic |
| **Operating Temp** | -40°C to +85°C | Industrial grade (indicated by 'T') |
| **Stability** | ±50ppm or ±100ppm | Frequency variance over temperature/time |
---
## Part Number Breakdown
While nomenclature can vary slightly by manufacturer (such as MtronPTI), the suffixing usually indicates the following:
### 1. "MHO" Prefix
Indicates the product series, typically a **Metal Hermetic Oscillator**. The metal casing provides shielding against Electromagnetic Interference (EMI) and environmental protection.
### 2. "23" Configuration
This usually refers to the internal architecture and pinout configuration (Full-size 14-pin DIP, though only 4 pins are electrically active: Vcc, Ground, Output, and Case/NC).
### 3. "T" - Temperature Grade
The "T" signifies that this part is rated for an **extended temperature range**, making it suitable for industrial applications rather than just consumer electronics.
### 4. "FG" - Lead-free / RoHS
"FG" often denotes that the part is **RoHS Compliant** (Lead-Free) and "Green," meeting modern environmental safety standards for electronic components.
### 5. "-R" - Packaging/Revision
The "-R" suffix usually denotes **RoHS compliance** (Redundant check) or that the part is shipped in specific industrial packaging (like tubes).
---
## Common Applications
* **Microcontrollers:** Providing the external clock source for CPUs.
* **Networking Gear:** Syncing data transmission in switches or routers.
* **Industrial Control:** Used in PLCs (Programmable Logic Controllers) where temperature stability is required.
* **Legacy Hardware:** Maintenance and repair of older computing equipment using through-hole DIP components.
- ⤷
What is the pinout configuration for a standard 14-pin DIP oscillator like the MHO+23TFG-R?
- ⤷ Can this oscillator be used in a 3.3V circuit if it is rated for 5V?
- ⤷ What is the difference between an 'active' oscillator and a 'passive' crystal?