MEH26XBX-R
AI

The **MEH26XBX-R** is a specific model of an **AC Axial Fan**, typically manufactured by **Mechatronics**. These fans are widely used for thermal management in industrial equipment, servers, and power supplies.
Below is a breakdown of its technical specifications and electronic components.
---
## 1. Technical Specifications
The MEH26XBX-R is part of the high-performance AC fan series. Its performance is defined by the following parameters:
| Parameter | Specification |
| :--- | :--- |
| **Input Voltage** | 230V AC (50/60 Hz) |
| **Dimensions** | 60mm x 60mm x 25mm |
| **Bearing Type** | Dual Ball Bearing (for long life) |
| **Input Power** | ~4.0 to 5.0 Watts |
| **Rated Speed** | ~4,500 - 5,000 RPM |
| **Airflow** | ~18 - 22 CFM (Cubic Feet per Minute) |
| **Housing Material** | Die-cast Aluminum (acts as a heat sink) |
| **Impeller Material** | UL94V-0 Plastic |
---
## 2. Key Electronic Components
The "brains" and "muscles" of the fan consist of the following internal parts:
### A. Shaded Pole Motor
Unlike DC fans that use complex logic controllers, this AC fan typically utilizes a **Shaded Pole Induction Motor**.
* **Stator:** Laminations of silicon steel with copper windings.
* **Rotor:** A permanent magnet or induction squirrel-cage rotor attached to the fan blades.
### B. Dual Ball Bearing System
The "B" in the part number often denotes **Ball Bearings**.
* **Benefit:** These provide significantly better resistance to high temperatures and a longer MTBF (Mean Time Between Failures) compared to sleeve bearings.
* **Lifespan:** Usually rated for 60,000+ hours at 40°C.
### C. Thermal Protection
The motor is **Impedance Protected**.
* If the fan blades are obstructed (locked rotor), the internal resistance of the windings prevents the current from rising to a level that would cause a fire or melt the insulation.
### D. Connection Type
* **Terminals vs. Leads:** The "-R" suffix usually indicates a specific lead wire configuration or a RoHS compliant revision. It typically features two UL-recognized lead wires for direct connection to an AC power source.
---
## 3. Part Number Decoder
Understanding the nomenclature helps identify the electronic capabilities:
| Code Segment | Meaning |
| :--- | :--- |
| **MEH** | Mechatronics High-Performance Series |
| **26** | Size Code (60mm x 25mm) |
| **X** | Voltage Code (typically 230V class) |
| **B** | Bearing Type (Ball Bearing) |
| **X** | Speed Grade (High Speed) |
| **R** | Specific revision/Environmental compliance (RoHS) |
---
## 4. Maintenance and Safety
* **Grounding:** Since the frame is aluminum, it is essential to ensure the equipment it is mounted in is properly grounded to prevent electric shock.
* **Voltage Sensitivity:** Operating this fan significantly below 230V will result in a failure to start, while higher voltages will cause the windings to overheat.
- ⤷
What is the difference in lifespan between the MEH26XBX-R and a sleeve bearing equivalent?
- ⤷ Can this fan be speed-controlled using a PWM signal?
- ⤷ What are the specific mounting hole dimensions for this 60mm fan?